My galaxy s 4 mini is stuck in safe mode, Help!!!

I have tried resetting my phone, taking the battery out and taking the sim card out and nothing is working....Please help!!!

I'm sorry you're having issues with your device b.200316. Is there any damage to your phone? Have you tried plugging it up to the charger? If you still have issues, I recommend taking your phone to a corporate store for a hands on evaluation.
Kinquana_VZW
Follow us on Twitter @vzwsupport

Similar Messages

Ipad mini is stuck in landscape mode-help!

I've tried powering the device down. I'd like to avoid resetting my settings.

Is the orientation lock ON? Swipe up from the bottom of the screen to open Control Center. Lock button is on the top row, far right.

My ipad mini is stuck in dfu mode trying to restore it with ios 7.0.2 it completes the bar(restoring ipad software) then it gives me the ipad could not be restores. an unknown error occured(14)

my ipad mini is stuck in dfu mode trying to restore it with ios 7.0.2 it completes the bar(restoring ipad software) then it gives me the ipad could not be restores. an unknown error occured(14)

Are you using a valid Apple charger that came with the iPad?
Attempting to use a computer USB port, an incompatible charger, or attempting to charge via a wall socket that only receives power from a wall switch — can all lead to a low, or depleted battery condition. Has this iPad been wet, or dropped?
Verify all of the above, and correct. If the iPad still cannot hold a charge, consider taking to an Apple Store, or authorized service provider to evaluate it.

My ipad mini is stuck in recovery mode. Help please!

Hello. My ipad mini is stuck in recovery mode. It is not jail broken. I tried fixing it by pressing the home bottom and then connecting it to the cable (which was connected to the computer), just like the apple support says. But it does not work. Help!

Follow step 1 to step 3 very closely.
http://support.apple.com/kb/HT1808

MacBook Pro- Stuck in safe mode!?

Hi, I am a first-time MacBook user and need a little help...
I am running lion software and recently performed a software update (pop-up screen general update). Since doing this, my Mac is now:
- Only allowing me to type in Shift Mode i.e. I cannot type '1' but it types '!', '3' becomes '£', etc etc
- Stuck in safe mode
- Will not recognise any USB's (however i suspect this is because it's stuck in safe mode!)
Any help would be much appreciated??? I cannot use it any more, and it makes me just want to get rid of it! :-(
Thanks in advance....... :-)

Try resetting the SMC - http://support.apple.com/kb/HT3964 - see the drop-down menu on "Resetting the SMC on portables with a battery you should not remove on your own."
Good luck,
Clinton

Windows Stuck in Safe Mode - mouse won't work - need my data...

New Mac User, well two months of trying to get it to opperate correctly. Unbelievable! I've re-installed XP SP2 too many times to count, finally had it up and thought it was running fine for the last week, then I went over to the Mac OS tried accessing windows through boot camp, it shut down the Mac OS, then when I tried to go back to boot windows directly, I received the damning <windows root> \system32\hal.dll file is missing or corrupt - again.
I've gone through a bunch of posts, tried a number of the instructions, and now have a worse issue, my computer is now stuck in safe mode with Windows, by instructions, here, I'd disabled everything for start up in Configuration Utility and checked start up in safe mode there too, so now I can't get it out of it, and since my mouse and keyboard won't opperate in safe mode, I get to the log in page to select user but the mouse just won't move and pressing "CTRL ALTDLT" no response.
In the Recovery Counsole when I rean CHKDSK /r this is what it came back with...
"The volume appears to contain or or more unrecoverable problems."
97638572 kilobytes total disk space.
90877508 kilobytes are available.
406 bytes in each allocation unit.
24409643 total allocation units on disk.
22719377 allocation units available on disk.
So what does that mean? Not sure what the " volume appears to contain one or more unrecoverable problems" means when it's not telling me what they could possibly be. Thoughts anyone?
If anyone knows or has some good advice on how to get windows back up and running correctly, and without wiping out my data - as I can't get it backed up, I would be tremendously grateful...
2 months of this is really enough, dying to use my system, and praying that I can...
Thanks so much,
Kitti
Message was edited by: Kittikatt
Message was edited by: Kittikatt

Here's what worked: http://support.microsoft.com/kb/330184
I followed the instructions above and once I finished, After re-booting, I selected Microsoft Windows XP Professional and the System Configuration Utility came up.
On the “General” tab, it shows that the Start Up Selection is on “Selective Startup” with everything checked, but what’s marked “Using Modified BOOT.INI
Tried to change it to “Normal Startup – load all device drivers and services” then re-start.
Windows came back up, but so did the System Configuration Utility and still showing that it was starting up with “Selective Startup”
Now just need to figure out how to start it up in “Normal”, if in fact that’s possible. Will keep you posted and if anyone has any further suggestions, that would be much appreciated.
I do hope this will help all the others that have run into the main issue, which I have found is caused by the Parallels Desktop by they way, not Microsoft, and that start having issues by getting the dreaded " hal.dll " file is missing or corrupt on a direct Boot to Windows.
Very long and sleepless night….
Kitti

Stuck in safe mode on windows 8.1. and it is not recognizing my password, so i cant get into anywhere to sort it.

NORTON WERE DOING A REMOTE ASSIST, WHEN THEY HAD TO RESTART MY LAPTOP, BUT WHEN ASKED FOR MY USER NAME PASSWORD IT WAS SAYING EITHER YOUR U/NAME, OR P/WORD IS INCORRECT. SO NORTON COULDN'T HELP. SO I CONTACTED MICROSOFT TO GET A NEW PASSWORD WHICH
WAS EASIER THAN I THOUGHT. BUT WHEN I TRIED ENTERING IT, I WAS STILL GETTING THE SAME WRONG U,N OR P,WORD? "HELP" PLEASE....MY HEAD IS DONE IN AS NORTON WANT NOTHING TO DO WITH IT AND MICROSOFT ARE WANTING CLOSE TO £100 FOR DOING A REMOTE ASSIST.
SOMEONE PLEASE "HELP"ME OUT OF HERE!!!

Hi
Please refrain from using caps! looks like you are shouting.
You say that your machine is stuck in safe mode. when you boot does it go straight there?
Good read on accessing the advanced options and repairing your machine.
http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How can i get my bookmarks back, after mozilla crashed and got stuck in safe mode?

I was using mozilla as usual when suddenly it crashed and then my computer turned off. i restarted it and said it had gone into safe mode. i tried to restart the computer again but it was stuck on safe mode.
The bad part is that all my bookmarks are gone and apparently there is no way of getting them back.
please help!

See:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Did you check your hard drive with the chkdsk.exe utility?

I have iphone 5c in blue says error code (1) and stuck in safe mode please help? No water damage

My iphone 5c stuck in safe mode with error code (1) cannot restore? Anyone help please ?!?

go on the internet and type in find my iphone 5c but then once you have done that type in your apple ID then take it out of recovery mode hopefully that should work

Stucked at Safe mode (windows 8.1)

It's been 5 months that my Hp laptop stucked at safe mode.
5 Months ago i tried to delete Eset Smart security from my laptop, the program said that the best way to do it is by Safe mode, so i reboot my laptop and then it asked for a password, so i enterd my normal password for every account i have, and it said it's
incorrect.
I tried tutorials of hacking into the laptop, tutorials of passwords recovers, not working.
Because it's a safe mode, no network.
I need a solution that will leave my data in my laptop, i have pictures, works, programs, important stuff.
Please help.

Hi,
Which account did you choose when you logon Safe Mode? To uninstall Eset Smart, you can also uninstall it at normal mode.
How about using system build in Administrator account to logon Safe mode? Have you tried yet?
Roger Lu
TechNet Community Support

Stuck in Safe Mode

It appears that I am stuck in safe mode. Currently i have tried to-reboot with tapping the F8 key and choose... Start in normal mode/didnt work...did it again and chose the-resore to last known good configuration/didnt work.-windows and R/didn't work-2 different restore points/didn't workAny other suggestions?

JW
Can we assume you went into msconfig and unchecked it?
win key +"X">run>msconfig
Wanikiya and Dyami--Team Zigzag

Xperia z1 is stuck on safe mode please help

Xperia z1 is stuck on safe mode please help, I have done over 10 normal restarts and still stuck

This might be helpful
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
Don't forget to give Kudos
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Hp Pavillion windows 8 stuck in safe mode- no display

My girlfriends pavillion notebook has the win 8.1 upgrade on it. It came with win 8. The display is broken and she has been using a monitor connected via the HDMI port. She was having performance issues, freeze up, delayed response type stuff. Bad enough I decided to restart in safe mode to work on it. I did so without thinking about the HDMI port not being enabled in safe mode. It was actually a Safe mode/minimal restart. So now I can not get it out of safe mode because I have no display without the HDMI port. Any suggestions would be appreciated. I have tried a hard boot, where you take out the battery, disconnect everything and hold down the power button. Though highly recommended several times she did not make a start up disc or recovery disc.

Hi
Please refrain from using caps! looks like you are shouting.
You say that your machine is stuck in safe mode. when you boot does it go straight there?
Good read on accessing the advanced options and repairing your machine.
http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Pavillion N-15 030us stuck in safe mode with no display

The display is broken and I was using a monitor connected thru the HDMI cable. I restarted the notebook in safe mode which I take it does not enable the HDMI port? So now I am stuck in safe mode with no display.

Hello @LogicMantra,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop is not able to display after booting in safe mode, and I would be happy to assist you in this matter!
To correct this issue, I recommend borrowing an HDMI compatible monitor and updating the drivers for your system this way. If this does not work, please follow this document on Computer Starts but Monitor Remains Blank (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Help! I deleted all software from MyRIO and it's stuck in safe mode

Hi,
In the NI MAX interface I saw that there were a new software version to intall, in the section where is possible to add and remove software items to MyRIO from a list with checkboxes. The last option in that list was something like clear everything, remove all software, or other similar text.
I did this, planning to install the new software version after that. Then the MyRIO restarted in safe mode, whith the status led blinking three or four times each 5 seconds. And it never was recognized again by the computer.
I tried the reset button without success. The MyRIO is always stuck in safe mode.
Then I tried communicate using the serial port of my computer configured according with the MyRIO User Guide, connecting the RX, TX and GND of the computer connector in the UART ports of the MXP A connector. But the NI MAX don't see the MyRIO, there is no answer in the serial communication.
How can I install the software again in MyRIO?
Thanks in advanced.
Regards,
Rodrigo.
Solved!
Go to Solution.

Hi,
Today I managed to communicate with MyRIO and now its working again.
The interface RS232<->UART using the IC MAX232 worked, but I could not install the software in MyRIO through this interface.
Probably I uninstalled the NI software related with MyRIO from my Host computer, because when I connected the MyRIO using the USB interface to my other computer it was recognized and I installed the software in it without problems.
Regards,
Rodrigo.

My galaxy s 4 mini is stuck in safe mode, Help!!!

Similar Messages

Maybe you are looking for