My galaxy s5 is rejecting all incoming calls

when people call me it says the user has blocked all incoming calls, or something like that. i have turned blocking mode off and i turned off call rejection for the call settings. i dont know what else to try

    Hello scrpnsub, let's get to the bottom of this together! Can you dial *73 on the device and you will hear a few beeps. Hang up the call after the beeps and then test receiving a call. Are you able to make outbound calls? Keep us posted!
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Similar Messages

  • BB reject all incoming phone calls

    Hey
    I have a problem my Blackberry started to rejecting all incoming phone calls from numbers which i dont have in my phone book. Any solution ?

    Open Settings then tap FaceTime and turn iPhone Cellular Calls to off.

  • There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

    There is no option to reject an incoming call in locked screen, there must be an icon on the screen for one who don't want to use lock button several times, i did'nt face this problem in last ios 6.1.3.

    A good read. Have you done anything at all to resolve your problem. Reset? Restore?
    By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

  • I can call out but all incoming calls are going directly to VM with no signal that I missed a call or have VM. I can send/receive text messages from other iPhone/iPad/iTouch users, I am assuming this is really "iMessage." Is it apple software?

    I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
    Problems: Suddenly ALL  incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive)  other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
    Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem  solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
    I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before.  Where is Steve Jobs when we need him?

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Help please...iphone5 when trying to make a call, after hitting green button to make call, screen goes straight back to keypad and all incoming calls go straight to voicemail, any ideas please? Everything else seems ok. No problem with sim or carrier

    Hi...I have just obtained a secondhand iphone 5.  I'm not technically minded  and I don't understand 'geek speak' so please be gentle.  I have done all I can think of to bottom this problem. I have switched on and off.  Tried different o2 sims (including 2 brand new) that I know are fine, restored to factory settings, changed carrier from 'Auto' to O2 and spent ages on line with o2 chat but everything at their end is absolutely fine. Everything on the phone seems to be working apart from the phone aspect of things. All incoming calls go straight to voicemail and show on the phone as 'Cancelled calls' and when dialling out,  I can key in the numbers and get the keypad tone (not dialling tone) but as soon as I press the green key to make the call, all that happens is the keypad pops back up onto the screen. The phone was bought on ebay as an o2 phone (the photo showed Giffgaff on the phone's screen but I understand this to be one and the same?) and as being 6 months old but I have put the serial number into the support website and...surprise surprise..,it must be at least twice that age as the warranty has expired.  I have made 2 attempts to have a web chat with Apple Support,  have reached the 'You're all set, we'll be with you in 2 mins'  and have been left hanging there for over an hour on each occasion,  so I've given that up as a bad job!!  Any help will be much appreciated...and also, will Apple charge me £25 for each of the aborted chat attempts, please?  Over to you...hopefully and many thanks in anticipation.

    My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
    This is entirely a carrier issue.  If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
    i feel i need to change my brand
    This is a user-to-user tech support forum, not Apple.  No one here cares at all about your threats.
    NEVER post personal info in this public forum

  • All incoming calls divert to "Sorry, you can't lea...

    Help please!
    I recently cancelled 1571. Since then all incoming calls divert immediately to a message saying: "Sorry, you can't leave a message at the moment" and then disconnect.
    Everything else works fine (outgoing calls, broadband), and since the voice message sounds exactly like 1571 it seems pretty obvious that something went badly wrong with the 1571 cancellation.
    I have had some lovely conversations with 151 and with the online chat people who have seem to have no idea how to fix the problem.
    I see from the forum that this type of problem has been encountered before over several years and the only way to get it fixed appears to be to post on here and wait for the BT people who monitor them to spot it and come to my rescue.
    So HELP! <waves flag> Here I am, please come and rescue my phone line from the 1571 gremlin.
    Dave

    I just cannot believe I'M READING THESE POSTS AND THAT OUR EXPERIENCES HAVEN'T FED THEMSELVES BACK TO THE PEOPLE WHO MATTER AT BT. (Sorry hit caps lock!) I have had exactly the same experience as you all and I have been on the phone for hours trying to get the message through to the people on the end of 151 that the problem is obviousky with the 1571 system. I got to the point three days ago when there was a glimmer of hope that my word was being accepted about the problem. I was upgraded to speak tp a 'supervisor' or similar, who said that 1571 would be reconnected to see if people could then the get through again - beyond the scary message. Of course the moment it was reconnected the phone line was fine. He promised me that he would ring back yesterday to check the situation but I heard nothing. SO I got back onto 151 and had all the same discussions again. I asked why I had been promsied a return call - no explanation. Everything was clealry on notes on his computer but I had to go through the same questioning about answer machines at home etc etc. I suggested that the 1571 system was so complex that few people at BT have any clue that it is capable of giving the recorded message that we have all reported. He said he knew all the 1571 FACILITIES AND THAT NO SUCH MESSAGE CAN BE SWITCHED ON. (Hit it again sorry) I can't tell you how relieved I am to read your posts acknowledging the same experience. I am now waiting for 1571 to be switched off again to see what happens, and he has promised to ring me back on Monday afternoon at 2.00pm (5th January 2014). I also got a letter from BT welcoming me to the 1571 service and explaining that it will now cost me £1.75 per month - I've had it for years and the reason I want it turned off is to save the new charges. I fell totally exhausted with th whole affair. Happy New Year, and best regards.

  • Nomorobo blocking all incoming calls

    I set up Nomorobo last night.  Got the confirmation phone call.  After that, all incoming calls were blocked after the first ring.  I emalied Nomorobo and am waiting for their response. Anyone else have this experience?

    csk47 wrote:
    I just installed Nomorobo yesterday as per the instructions given.  Everything appeared to be set up correctly and the test screen showed protected.  A couple of hours later I got a call with a short first ring then a second ring..then nothing.  So I assumed it was a robocall that was intercepted.  A few hours later another call came in..it, too, was intercepted.  It seemed odd that two calls coming in..both are robocalls..so I logged into Xfinity and saw that both calls went right to voice mail rather than ringing through so I could answer them at home.  Tried calling my home number with my cell and same thing...right to voice mail.  Sent a message to Nomorobo but no response as yet.  It seems the fault must be in the Call Forwarding preferences of Xfinity...but for now I've disconnected Nomorobo and calls from my cell go correctly to my home phone.  If anyone comes up with a solution please post it.It took a month for me to hear back from nomorobo support and then I got this when I told them all my calls were going to robo. I did have it set up correctly so still not sure why mine won't work and I undid everything so I am back to 'normal' for now.   It might be of some use to you.... "I'm sincerely sorry for the extreme delay here. From the information you've given me it sounds like the toll-free number (202-813-1600) we provided you is in your Call Forwarding list, not the Advanced Call Forwarding list, which means all your calls are being forwarded to Nomorobo. You should remove the number from that location and all incoming calls will no longer be blocked.If you don't see the Advanced Call Forwarding option, it's because Voice2Go isn't activated. Here is a link that should help you activate Voice2Go: https://customer.comcast.com/help-and-support/phone/activate-voice-2go . Here is another link with specific instructions to using Nomorobo on Comcast Xfinity: https://customer.comcast.com/help-and-support/phone/nomorobo"

  • How can I reject unwanted incoming calls

    I'm using iPhone 3G. recently I have unwanted incoming call,How can I block those calls.

    All the information you need is in the iPhone User Guide:
    http://support.apple.com/manuals/#iphone

  • All Incoming calls are 'Unknown'

    About 6 days ago all my incoming calls are coming in as 'Unknown'. Also my phone calls to my friends/relatives were showing up as 'blocked' or 'private'.
    I was on the phone with at&t and they said all my settings were fine. They put me through to apple support and we did a reset of settings on my phone and that resolved my outgoing calls as showing up as 'Blocked/Private' but STILL all my incoming calls are showing up as 'Unknown'. VERY frustrating. What is weird though all my incoming text messages know the name of the contact...why would this not work for phonecalls. ANY suggestions at all on how to resolve? I really don't want to have to try and reset all my default settings again on my phone, but if another attempt at that is suggested I guess I'll try. Please advise.

    I have a similar problem although it's only with some numbers showing up as "Unknown". I went to the local Apple store and a busy Genius said it ws an AT&T problem. So I spent an hour on the phone with an real good AT&T tech. 866-700-2105 gets you right to iPhone tech support. He said it was a iPhone issue. So I made an appointment with a Genius. We put my SIM card in a new phone - same problem. I had a person call, whose number shows up as Unknown on my phone call the Genius'iPhone. Caller ID shows the number. So we think it's my SIM card. Off to the AT&T store for a new SIM card. With a new card - same old problem. The ball is back in AT&T's court. I bet you thought there would be a solution here. Sorry.

  • About 1/4 of all incoming calls are not connecting

    Using 3G or Edge (with full signal), I am experiencing a problem with one of every few incoming calls. The phone rings but when I answer it, I only hear my own echo, if anything at all. When the person calls back (or I beat them to the punch), they say that my phone didn't even ring so they hung just up and redialed or, in some cases, answered my call if I called them back.
    I've got version 2.1 and everything else seems to be working fine. Any ideas?

    Hi Jay,
    Are you using any accessories with the iPhone? Do you see the issue when not using bluetooth headset, car kit, stereo headset, protective case?
    Does the iPhone have the same issue in all locations?
    If you haven't already try to reset the iPhone. http://docs.info.apple.com/article.html?artnum=305743
    You can also restore the iPhone and set it up as a new phone. http://docs.info.apple.com/article.html?artnum=305744
    Jason

  • Configure sendmail to reject all incomming mail?

    how would i configure sendmail on solaris8 to reject or trash all incomming email and still maintain capability to send email?

    I found this thread useful and wonder why it some of this information isn't more readily available. Webservers shouldn't be running at mailservers and so the sendmail daemon doesn't boot up. Mail at cron and through .cgi/perl scripts utilize the sendmail on the servers I manage.
    BUT -- in the last six months I find I'm having to reconfigure the sendmail.cf to find a way around an email configuration problem in our networks somewhere.
    I've normally used the smart relay without problem. Now, even though I have the "connect" for mail going out to several different mail relays on the domain, the mail does not get delivered. I've tried to trace it down to one relay and have been unsuccessful.
    The solution, and I don't understand it, is that we've setup a mail relay on a windows box in our domain and I've edited the sendmail.cf to use that mail relay instead of the smart relay.
    In addition, and this is really strange to me, but I'm not a sendmail guru -- we're masquerading as a hotmail.com
    If we don't masquerade as hotmail.com and use our own relay, the mail receipients don't receive mail occasionally. Both of these have to be in place for it to work successfully.
    I think someone, somewhere, has a rule setup incorrectly, but it's beyond the relays we normally default to. With the mail relay setup in our domain, it accepts the mail because it's a relay, but what kind of rule would they possibly setup that accepts us masquerading as someone else???
    Can anyone help explain this?
    I personally would love to see some documentation on how an SA could setup sendmail.cf for their webservers as outgoing and have it RIGHT.
    Thanks for listening.... feel free to say something. :-)

  • Can I stop ALL incoming calls?

    I am going to Europe and signed up for international calling, but do not want to pay $1.99 for every incoming call. I was told even if I do not answer a call that it will cost me $1.99. Since I will be using my phone for several applications and email I do not want to turn my phone off just so calls do not come through. I'm hoping I'm just missing a setting as this situation would make my Iphone nearly unusable if I have turn turn it off and on dozens of times daily. Ideas? Cheers ~ Rob

    Am I missing something here? Why not just forward all calls to your voicemail number before leaving the US.
    Unless you prevent your phone from registering on a roaming network, then without such forwarding already in place calls will forward to the roaming network before either ringing your iPhone or going to voicemail. Either way this will incur a charge. In the case of calls that hit the roaming network and then go to voicemail you incur a double charge: the cost of forwarding the call to the roaming network plus the cost of returning the call to your home network for voicemail.
    I would recommend contacting your service provider who should be able to advise on how to divert all calls to voicemail before you travel.

  • My phone is not ringing on all incoming calls (the switch on the side is on at the time of the incoming call), what can I do to have all calls ring?

    My iPhone 5 is not ringing on all of the incoming calls even though the side switch is on.  Not sure what to do?  Anyone else having this problem with incoming calls?

    I had a friend with the same problem, he had Do Not Disturb ON, you can see if yours is ON, if it is, turn it OFF.
    You can learn more about it here, Use Do Not Disturb on your iPhone, iPad, or iPod touch

  • IPhone 4S all incoming calls drop

    I have an iPhone 4S 32GB (White)
    It was working perfectly up until the 5.0.1 update.  Now INBOUND calls drop as soon as I answer them, I barely have a chance to say 'Hello' and I get a beep and the call failed message on-screen.
    After hours of restoring/resetting/swapping SIM's etc I have discovered that I can replicate this fault 100% of the time by having Wi-Fi and Cellular data active at the same time.  If I leave these both on I CANNOT receive incomming calls as they always fail.
    If I turn off Wi-Fi I CAN receive calls.
    If I turn off Cellular Data, again, I CAN receive calls.
    Leave both on and Im stuffed.
    Apple are sending out a box to return it to them so hopefully its just a duff handset and not something that is widespread like a bad chip or firmware as this is a major pain.

    same problem , apple store gave me a new phone , set up everything , and didn't help , on both 5.0 and 5.0.1 softwares.. will go to see them tomorow again , expecting product for £500 work properly . 16gb 4s white.

  • I have downloaded ios 6 on my iphone 4s and now all incoming calls go straight to VM any tips?

    Hello
    I have just installed IOS 6 on my Iphone 4s and now when I try to call my iphone all the calls go straight to Voice mail.  Any tips or hints?

    same problem, along with many many others already noted here and still not had any help from anyone or any fixes lol (apart from silly obvious things like restore bla bla bla)
    can i have £1000 per missed call please apple?
    im losing money because of it, thanks...

Maybe you are looking for

  • User library has disappeared when viewing with finder

    I saved a Pages file as a template and it saved it in user/library/application support/iwork/templates/my templates. When I try to follow this path with Finder there is no library folder under my user name. Any ideas?

  • Activation of ODS taking very long time

    Hello friends,      I have a problem with activating ODS data . Data has been loaded into ODS , but Activation process is taking more than 1 week . This problem is since last week. We are using BW 3.5 version with SP level 18.   When I right click OD

  • Digitally Verified Signature Fields After Saving

    I am using Acrobat 9. I am creating a PDF with a whole slew of editable fields. Once the PDF is done I need to be able to email it to several people who need to be able to fill it out and save it (so that they can upload it to a website for me). I ha

  • Dialog Queue Standstill

    Hi, Our production server stopped today with the dispatcher giving the follwoing message "Dispatcher runing,dialogue queue standstill" We found all dialog work processes being filled up y user SAPSYS. We restarted SAP and this resolved the issue. I w

  • Document date in MRKO

    Hello All, Does anybody know how to change the document and posting date in MRKO transaction? I would like to be able to post using different dates. Is it possible? How? Thanks, Michel Khouri