My Gen 7 ipod is detected by itunes but not properly recognized

My gen 7 ipod is detected by itunes but not properly recognized.  I have reloaded itunes and other trouble shooting, but no luck

Suggest you try the following two steps starting with the first one. If it doesn't correct the problem perform the second step.
Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

Similar Messages

  • Ipod touch 4g detected in itunes but not showing the ipod touch control panel

    i just setup my ipod touch 4g on ios 5.0.1. It's detected in itunes on the devices side bar but when i click it just a white screen stating "ipod" comes on the itunes window. help ! i cannot sync anything onto it

    Try connecting your ipod to another computer and sync only 1 file or song just for isolation purpose only to see if it'll sync.
    If still not syncing, then porbably you may have a bad iOS installed in iPod which is hard to see if it has a problem because you said nothing's wrong with iPod. I just saying is, it MIGHT have a bad iOS.
    If you are unable to do a restore, put your ipod in DFU mode, then connect to iTunes and iTunes will detect your ipod in restore mode. Press shift key (PC keyboard) then click the restore button on iTunes. I hope you have your copy of IPSW file for restoration purposes.

  • IPod updates on 1 iTunes but not 2 others

    I manually manage my music and my iPod will update on my father's computer but not the one i originally set it up with or my laptop... I have 7.0.2 and an iPod photo 20gb. Please help... Its really frustrating...

    Click here for options.
    (38419)

  • My ipod touch 4th gen says ipod disable connect to itunes but shows up as digital camera on computer and not in itunes

    i cant get it figured out

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen

  • My ipod is appearing in itunes but not finder

    I took some photos on my new ipod touch 4th gen black and can't figure out how to get them off! I don't have a connection to wi-fi at the moment so am using the usb cable. I've tried both ports, turning off and on again itunes, turning on and off again the ipod. It appears in itunes so it's connected and recognisable in there but it doesn't appear on my mac desktop or under devises in the finder window.
    Any ideas?

    It does not appear in Finder unless you are using a third-party program. Try:
    iOS: Importing personal photos and videos from iOS devices to your computer
    iOS: Unable to import photos or device not recognized as a camera

  • My IPod shows up in ITunes but not on the desktop or finder

    I can't find my IPod in any place other than ITunes and I am trying to migrate it to a new computer

    An iPod does not show in finder.
    To change syncing computers see:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    My Ipod 5th gen. has been detected by itunes, but could not identified properly, and its been charging for a week and still hasn't come to a full charged. What should I do?

    but could not identified properly
    Please clairify.
    charging for a week and still hasn't come to a full charged
    Sounds like you need a new battery.  Take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.
    iPod Repair Pricing

  • My iPhone and iPad aren't detected by iTunes but iPod classic syncs

    My iPhone and iPad aren't detected by iTunes but iPod classic syncs. I have re-installed iTunes, reset devices etc. The iPad and iPhone charges through the computer and Windows 8 recognises them.

    Hi Vlismas,
    Welcome to the Support Communities!
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    I hope this information helps ....
    - Judy

  • 2nd Gen Ipod will sync with itunes but will not download new song

    My Ipod will sync with itunes but will not download newly purchased songs.  It is Ipod nano 2nd gen.

    If you want to use automatic syncing, you may need to set up or update the iPod's Music sync settings in iTunes.  If the new songs are not included in what gets synced to the iPod, they will not sync.
    If the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.  The iPod appears in the sidebar, under DEVICES.  Select it there, to show its Summary screen to the right.  Toward the top, there is a bar of buttons, starting with Summary.  Click on Music next to Summary.  This Music screen is where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music, if not already checked. This is the "switch" to enable automatic syncing for songs.
    NOTE:  If Sync Music is not already checked, that means the iPod is currently set to Manually manage music.  Setting up automatic syncing will replace the iPod existing content.  If you want to add the new songs manually to the iPod (instead of using automatic syncing), please post back.
    If your iTunes library fits on the iPod, you can choose the option to sync Entire music library.  Otherwise, choose the option to sync Selected playlists, artists, albums, and genres.  Below that, select (checkmark) what you want to sync to the iPod from the lists.
    One convenient way to set this up is to first create one or more playlists in your iTunes library, with ALL of the songs you want on the iPod.  Or you can use existing playlists.  Back on the iPod's Music screen in iTunes, select those playlists under Playlists.
    When you click Apply, iTunes syncs the songs in your selection(s) to the iPod (replacing its existing content).  Going forward, to update the iPod, you can just update those playlists in your iTunes library (add/remove songs).  If you have new songs, add them to a playlist that is synced to the iPod.  The iPod does not need to be connected.  The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates your iPod with the same changes.

  • Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes  but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.

    Did you try everything here:
    iOS: Device not recognized in iTunes for Windows
    Then try a different computer to help determine if yo have an IPod or computer problem.

  • HT2052 After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life

    After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy

    See if placing the iPod in DFU mode will allow a restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Ipod will connect to PC but not itunes

    Hey, I'm having a problem with my fifth generation ipod(30gb). When I plug it in to put music on it, a message comes up and says,"The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." I have installed itunes 3 times and it has never helped with the problem. I also thought thought of updating my ipod or restoring it but im not able to because an "iPo service error" comes up when I start the updater. Please help.
    fifth gen. ipod 30 gb. black   Windows XP  

    hi Snoop!
    with those symptoms, we'd better start off with the possibilities in these documents:
    iPod for Windows: Fast user switching in Windows XP is not supported
    iPod shows up in Windows but not in iTunes
    love, b

  • Fix for "iPod shows up in Windows but not in iTunes"

    This is a possible fix for those with the "iPod shows up in Windows but not in iTunes" problem. This also fixes those have the update/restore problem (ipod disconnects after clicking update/restore in itunes)
    SOLUTION
    SOLUTION
    I had the exact same problems before, iTunes doesn’t recognize iPod after connecting it, I had to use the restart iPod Service method to get it working.
    I tried this on my second computer and it worked perfectly, iTunes recognizes iPod every time I plug it in.
    I compared the process/services opened in both computers, and I turned on some services which were previously on disable(excluding iPod Service). Unfortunately I forgot which services it was, so I took some screenshots and compare these with your services.
    After modifying the services, I tried plug and unplug the iPod several times without closing iTunes, iPod was instantly recognized by iTunes every time!
    I attached the links to screenshots of my automatic services and manual services, ignore the service if its not on your list!
    For those don’t know how to open Services, Start -> Run -> “services.msc”
    http://img214.imageshack.us/img214/6200/automaticservicesec2.jpg
    http://img216.imageshack.us/img216/3700/manualservicesce3.jpg
    -If anyone know the specific services required to be turned on, please reply in this thread.
    -I am using the 2nd Gen Nano 2GB version with latest iTunes.
    IBM T43 Windows XP Pro
    IBM T43 Windows XP Pro

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

  • Problems with artwork displaying in iTunes but not on iPod screen

    I have iTunes (7.6) and a 5th gen, 80GB, firmware 1.2.3 iPod.
    Not infrequently, I find that a song's artwork is visible in iTunes, but not on the iPod itself. Sometimes the artwork is displayed simply as a black rectangle on the iPod.
    The converse situation also sometimes happens - when album info is retrieved from the CDDB, sometimes album artwork is also retrieved - but this is not displayed in the iTunes software, only on the iPod.
    And yes, the "Display album artwork on your iPod" checkbox is selected in iTunes.
    Does anyone have any more info about this?
    Are there any restrictions on image file formats? Maximum size? Type? Interlaced or not?
    Last time I asked this question I got zero response
    It is an irritating problem, cos there's no way to check what the artwork looks like on the iPod without disconnecting it from my PC :/

    OK to drag this thread back on topic:
    I think the "sync" thing is irrelevant anyways.
    What I tried in the end was viewing my iPod in iTunes,
    navigating through to the check box for "display album artwork",
    UNcheck it, and click apply.
    At this point, iTunes said, with NO confirmation "Are you sure?" dialog, "DELETING ARTWORK ON iPOD" !! :-O I was not pleased
    However I then re-selected the "display album artwork" box and clicked Apply. The process took about 10 minutes to complete.
    When I then disconnected the iPod, the black squares were gone, and the artwork was NOT deleted (phew!) and was displaying correctly. I was pleased
    The amount of "other" megabytes on the display in iTunes for my iPod's contents had shrunk.
    I dunno what all this actually did - are the artwork files embedded in the MP4 files on the iPod? Or are they stored seperately and linked to them?
    I'm wondering if the "black square" thing is caused by an MP4 having an embedded image, and there also being a conflicting image file elsewhere on the hard drive? But this is just guessing.

  • [problem solved for me] ipod shows up in windows but not in itunes

    hi!
    i've got an 2nd gen ipod 10 gig.
    after having problems with mine i low level formatted it and ran some diagnostics tools from hddguru.com.
    and after installing itunes 7 it didnt showed up and i was pretty ****** of. but formatting the ipod with explorer (fat32, quickformat) solved the problem
    hope that will help anyone

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

Maybe you are looking for

  • Error While Installing EMP ADD IN BIG VOL

    During the installation process of EPM ADD IN FOR BIG VOL SP 18 Patch 1 ( Server: BPC 10 MS SP 13 )   a dos prompt appears with a lots of errors . Those errors are about load of asembly "BusinessObjects.DSWS.Session, Version=14.0.2000.0 , Culture=neu

  • Short Dump-Syntax error program"CL_RSD_MULTIPROV==CP" after EHP1SP5 upgrade

    Hi,      MultiProvider Activation/Display data is resulting into short dump with following text Error in the ABAP Application Program The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be terminated because it has come across a statem

  • Standby database failover flashback restart as standby gap 1-100

    Hi, I have setup a physical standby database for a 3 node RAC primary database and configured the database to run in MAXIMUM AVAILABILITY mode. Both the primary and standby databases use ASM for managing the IO. I have enabled FLASHBACK ON on both th

  • Activation of VBAP

    My table vbap. In vbap table i have zvbap structure.In that structure i have fields. i changed the two fields data type from NUMC to DEC and i changed the length of the fields also. After i activated the structure zvbap and table vbap.it is showing p

  • PDDoc Save Problem

    I have a script written in VBA (Outlook 2003, Win XP, Acrobat 9) that works on one machine but not another. The problematic part is the PDDoc.Save with which I'm saving the file to a new path and filename. When it doesn't work the PDDoc.Save returns