My GF4 MX440 TV-OUT finally works after one and half a year!!!

I bought this MSI GF4 MX440 video card in the middle of 2002. It comes with TV-IN and TV-OUT. The TV-IN works well and I can record video by connecting it to the AV-OUT of my TV. However, the TV-OUT didn’t work: after connecting the TV-OUT port to the AV-IN of the TV, the driver detected the TV correctly, but after selected clone option from nView, the whole screen of TV becomes light gray and no picture is displayed at all. I tried more than 5 different drivers (including the original MSI driver) and Win9x, Win2000 and XP, nothing works.
Yesterday I installed TVTool, and strange things happened: when I run TVTool the first time, nothing was changed: the TV is still in light gray color. After I clicked on button “Scan” in “Adjust” tab in TVTool, the screen of computer is displayed in the TV! Even if I quit TVTool, the TV-OUT is still working. I went to the display properties and setup TV as the device for full screen display, then when I use Windows Media Player or Real Player to play a video using normal size, the movie is displayed full screen on TV automatically! It’s really amazing. After stopped playing the video, the TV comes back to display the screen of the monitor again.
After I rebooted the system, the TV-OUT was not working initially, TV displays light gray again. But after run TVTool once without doing anything, the TV-OUT starts working even if quit TVTool now. So now when I want to use TV-OUT, I have to run TVTool once and the quit it. It is much better than nothing works at all.
I cannot explain why this happens. It looks that the TVTool enables something in the chip of the video card. Hope this will help somebody else.
BTW, this is my first and will be the last video card from MSI.

i m also having the same MX440 card , i am also having one problem with it..
i can run the TV-OUT option easily..
but as the screen of computer is displayed in the TV, but when i try to run any movie on my PC and i want to see the movie simultaniously at the same time , it is not possible ..
i can only see it on the primary display which is set.. , it coult be TV or monitor..
i want to see the same movie in both the display at the same time , is that possible ?
please someone help me ..
thanks

Similar Messages

Netweaver after one and half year of ABAP experience...

Hi all,
I am an ABAPer with one and half year of experience.
I wanted to know if its really worth to switch to netweaver after having around one and half years of ABAP experience as in india promotions are faster and one remains technical person for around 7 years only as in case i take some netweaver component at this stage i will have to start from zero .Further marketwise is there too vast difference between an ABAPer and Netwaver technical consultant as it will again take one and half year to learn new Netweaver component and by the time i will be having 3 years of ABAP experience in case i decide to remain inABAP.
In other words which one is better option between one and half years of Netweaver experience or 3 years of ABAP experience marketwise and careerwise.I will be really thankful if somebody can give a bit descriptive explanation in this regard.
Thanks.
Edited by: sandeep pande on Mar 19, 2008 7:40 PM

Hello Sandeep,
The market is never static , it keeps on changing, 'Change is the only constant' . Currently Netweaver platform is the platform of choice for SAP Customers and many are involved in upgrading their systems to the latest SAP Offerings.
You should invest in Netweaver , there are several learning courses you can take up or maybe buy books and rely on self learning.
What career you want to choose is your personal issue, however SAP will definitely phase out ABAP in the near future (maybe a decade), so its worth investing money and time now into a product which SAP has decided to go forward with.
On the soft skill side, you can always learn project management and people management, there are several courses out in the market for the same, this will slowly progress your career and take you away to a point where underlying technology does not matter.
Hope that helps.
Regards,
Siddhesh

Career after one and half years of ABAP experience

Hi all,
I am an ABAPer with one and half year of experience.
I wanted to know if its really worth to switch to netweaver after having around one and half years of ABAP experience as in india promotions are faster and one remains technical person for around 7 years only as in case i take some netweaver component at this stage i will have to start from zero .Further marketwise is there too vast difference between an ABAPer and Netwaver technical consultant as it will again take one and half year to learn new Netweaver component and by the time i will be having 3 years of ABAP experience in case i decide to remain inABAP.
In other words which one is better option between one and half years of Netweaver experience or 3 years of ABAP experience marketwise and careerwise.I will be really thankful if somebody can give a bit descriptive explanation in this regard.
Thanks.

Hi Sandeep,
It would be better to choose what you like the most ie feel comfortable to work. If you really want to swith to Netweaver then go for visual composer it is very easy to learn and there are lot of opportunites in US with a very high package.
It is would be best if you concentrate to become a techno functional rather than going for the Netweaver. So that you will explore more in ABAP as well as in the functional side.
Sap runs on Business process,technology may come and go but the Business still remains like SD, MM, FI etc....
Regards,
Viveks

My iPhone 5 the speakers is not working suddenly so I went to get the warranty service the open the mobil and told me it's broken so he put out of the warranty and I have to pay the fixing amount also after one and half month only come how

I bought it from jarir book store Riyadh Saudi Arabia the work shop told me no replacement for it we will fix it this bad reputation for apple products I want somebody sort it out for me plz I have the work sheet number if needed

We are all fellow users on here and not Apple employees.
Is this an Apple store you are dealing with, or an Apple authorized repair service? If it is only one and a half months old it is still in warranty, unless it has had accidental damage done to it.

I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks!

Why doesnt the DVD version of iworks work, after uploading (and then deleting) the trial version?

why doesnt the DVD version of iworks work, after uploading (and then deleting) the trial version?

Check out this discussion in the iWork forum. Yvan's AppleScript (about 6 messages down) will solve your problem.

My "9-o-l-." keys stop working after startup, and spreading! ahh help?

My "9-O-L-." keys stop working after startup and my arrow keys too.
Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
Thanks in advance!
-Andrew

I assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.

[svn] 3752: Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.

Revision: 3752
Author: [email protected]
Date: 2008-10-20 12:41:06 -0700 (Mon, 20 Oct 2008)
Log Message:
Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.
QA: Yes
Doc: No
Checkintests: Pass
Details: Merged change 3676 from trunk.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-195
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
width: 220px;
left: 180px;

TS3682 I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1! This is what I get for buying an Ipad twice in a week because of a broken scre

I backed up my ipad to the cloud as it had a broken screen so I swaped it out for a new one and now I cant restore because the new Ipad has IOS 6 and my back up is 6.1! This is what I get for buying an Ipad twice in a week because of a broken screen? $500 the first buy and then another $299 plus tax for the swaped out one that I can't restore with my backup data.

I assume that you will have to set up as new since it will not let you restore from the backup. Then after you set it up, you can restore from the iCloud backup. The backup should not disappear be use you are setting this device up as new. Your backup should still be in iCloud.
However, after you activate the iPd and update the software, you will have to erase the device in order to restore from the Cloud backup, that is the only way to get to the iCloud backup.
Copied from the article that linked you to this discussion ....
Resolution
Update your device to the latest version of iOS to be able to restore the backup.

Downloaded After effect and buy a year package but I can't activate

Downloaded After effect and buy a year package but I can't activate
the AE CC it request serial no
First of all, I used trial version and finish the trial period.
Then i bought the AE cc and now have one year package.
But I can't use AE cc, it just tell me that the Trial period is ended and need to to buy.
I set both Creative cloud and Adobe ID language the same, but it still not work.
I tried to uninstall the AE CC and install again, but still not work.
Please help, I need to use the Ae cc now and paid.....
Thanks!
Jacky

Jacky please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error preventing activation.

HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

Audio gets out of sync after export and burn to iDVD - works in iMovie

I've burned my DVD show twice on iMovie and iDVD and the audio music tracks slowly get displaced over the course of the show (15 min) after exporting and burning to iDVD. It gets pushed back so that it starts later each new track...I've locked the audio to the playhead for each new audio track - however, there are some empty gaps between the tracks, does this have anything to do with the displacement? Or should it not matter since the tracks are locked?
I had it all synced up in the playback on iMovie and had it aligned with visuals, however, after burning, it gets displaced and everything gets off...
Any help would be appreciated, thank you
Chris

The problem:
http://www.dvformat.com/htm/features/2000/800/dv_formatfaq.htm
(Scroll down about two thirds to "What's the difference between locked and unlocked audio?" )
The solution:
Always use 16-bit/48kHz audio.
iMovie: Audio and Video Lose Synchronization
http://docs.info.apple.com/article.html?artnum=61636
A few possible solutions here:
http://www.danslagle.com/mac/iMovie/audio/1001.shtml
iMovie: Improving audio and video synchronization
http://docs.info.apple.com/article.html?artnum=42974

I am trying out Final Cut Pro X and trying desperately to import a project from iMovie 11 (version 9.0.9). There is no export to FCPX in iMovie 11 nor is there import from iMovie in FCPX.

Can someone please help me?
I am trying out Final Cut Pro X on a 30 day trial. So far so good.
I am now trying desperately to import a project from iMovie 11 (version 9.0.9) into FCPX.
I have read multiple posts on this subject and they all recommend File/import/ from iMovie project in FCPX
However there is NO such option under File/import in FCPX - nor is there an option to export to FCPX in iMovie 11
Can anyone please enlighten me.

The current version of FCPX does not work with that version of iMovie. You need version 10.0.3, which allows you to send a project to FCP.

I updated MUSE and now the anchors stop working after one click. Active state on the buttons are not working either. The vertical scroll also stops working. Is this a bug.

I updated to Adobe Muse 2014 and now the anchors on my site stop working on the page after one click. Vertical scroll and active state on the buttons also do not work. Is this a bug?

I am also dealing with an anchor that stopped working. I tried everything i can think of to make it work, but no luck so far. I hope to see a helpful response here. Thanks.

My GF4 MX440 TV-OUT finally works after one and half a year!!!

Similar Messages

Maybe you are looking for