My girlfriend cannot see me
[Topic title updated by moderator to be more descriptive. Original topic title was: "Help"]
When my girlfriend and I skype each other, I see and hear her clearly but she can only hear me. Anyone else have this same issue and possible solution?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom
Similar Messages
-
Macbook Air cannot see Wifi but iPhone, iPad, and boot camp Widnows can
I just started living in an apartment with a shared wifi router. I have no control over this router and i'm fine with that since I'm just with my girlfriend here and don't have a lot of other uses for it other than simply downloading stuff and using a computer.
The problem is that literally every device I have (iPad, iPhone) can see and connect to the wireless network. Oddly, my Macbook Air 2013 cannot see this network. Some days I am actually able to connect and it works fine but then it'll just disappear and I cannot find it again. I have bootcamp installed on the Macbook Air and when I switch to Windows I can see the network and can connect with no problems.
I don't understand why the Mac OS side of things fails to even see the network when this is one of the devices with probably the most powerful network card considering it's 2013 and even has the ability to connect to ac wireless signals.
Any suggestions? I would prefer to use my Mac OS side of things rather than Windows due to battery life at least, among other obvious things.I FIXED IT!!!!
I reset my airport express (for the umpteenth time) but this time I did a manual setup instead of going through the assistant. Changed the Channel to 10 (I am surrounded by other wifi networks using 1 and 11, so I just picked anything but 1 or 11) and configured it for 802.11g only (it defaults to b/g on the setup assistant).
So far, no problems, and both MBA and MBP connect.
I would guess this has started to happen recently due to one or both of
- recent Lion updates
- additional wifi networks popping up in my apartment building causing some kind of interference
That's my layman conclusion anyway.
Thanks for all your help! I feel like a heavy weight has been lifted off my shoulders. -
Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!
Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
SteveHi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way? -
i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?
turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them
-
I just switched from an iPhone to a Galaxy 4S and I like it except for text messaging. I can text, they can see it, but I cannot see their response if they are using an iPhone. Can you help me with this? What do I do please?
Congratulations on your new phone kathdogg! Now let's get your messaging working correctly. If you still have your old device, turn it on, go to settings, and turn off iMessaging.
If you are no longer in possession of your old device, you will need to remove your phone number from your Apple Support Profile. This can be done here: http://bit.ly/1cst2SC
Please keep us posted, and let us know if this resolves your issue!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
Cannot see table in sql developer or sql plus
I have created a record in application designer. I have then built the table. I can close the record and then find it again in application designer. But if I go to sql plus or sql developer, I cannot see it. Am I missing a step?
You probably can see all the tables of sysadm because someone else give you proper grant for that on existing sysadm's objects.
For the new or modified object (drop+create) you should :
1. connect as sysadm and run
grant select on new_table_name to your_own_user;2. connect with your own user and run
create synonym new_table_name for sysadm.new_table_name;Then you'll be able to query that table without using schema name alias.
Some admin have also a ddl trigger to make it automatically.
You could also work through a role and public synonym if more than one user needs to access sysadm's objects.
Nicolas. -
I cannot see XMLType table in sql*plus
Hi,
Although I have wokred extensively with Oracle, I am new to Oracle XMLdb. My problem is I cannot see the XMLType tables created under my schema. I can see the tables when I do a select from user_xml_tables. But if I do a 'desc' or 'select from', I get ORA-04043 or ORA-00942. I can desc an XMLType table owned by xdb. I am using Oralce 10g. Please provide a solution asap as a customer is waiting on this.
Thanks,
Jayati RayRaghu !!
GREAT!!!
It was a BUG in Oracle sql developer, I installed the new version v3.0, It WORKS like a CHARM.
Thanks a million for your help!!!
Cheers
Tony -
My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You
Never mind, problem solved. When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually. Have a nice day @:-)#
-
I cannot see my Hotmail saved messages onmy iPad 4. I do not have this problem on my iPad 2. The settings appear identical.Any suggestions to cure the problem? Thank you.
My iPad 2 does exactly the same thing. But I just have to go on to my wifi options and you can either forget this network and then press it again or you can turn wifi off and on again and press that wifi.
Kind regards, -
On my Mac pro I cannot see my iTunes library in my slideshow as a music selection
I cannot see my iTunes library in iPhoto to add music to a slideshow
Hi Mary3400,
I'm not sure which version of iPhoto you are using, but see if the troubleshooting in this article helps.
iPhoto '11: Add music to a slideshow
The top section explains how to, the second section is for if you don't see your iTunes library as a source.
Best regards,
Nubz -
HP Envy 4500 - cannot see from my IPAD 4 gen, does not airprint
Dear all,
I hope you can help me. I cannot see my printer envy4500 from my IPAD 4 gen (IOS7.0.4). I've tried all, following also your instruction (reterived in this forum)to set a manual IP but it does not solve the problem. My router is wireless Belkin Surf N300 and it's on line, the printer is also on line in the same wireless network as also the IPAD. Only if I use the direct wireless I can see the printer, otherwise not. If I use the AiO remote APP I cannot see the printer when it's connected to the wireless network, I can only see when I use direct wireless. If I enter the printer IP address from browser when I am connected to the wireless network, I can see all data from printer, I can see also my router typing it's address.
Can some one help me?
ThanksHi zagar,
Welcome to the HP Support Forums. I understand that your iPad is not finding the printer unless it is connect by Wireless Direct.
I have included a link to another thread here on the forum addressing a similar issue. As you read through the thread you will find several steps to try. Please let me know if none of the steps correct the issue.
HP Support Forums thread
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/airprint-from-iphone...
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Extract process up & running but I cannot see new transactions in the trail
extract process up & running on source but I cannot see new transactions in the extract trail file and as result it is not replicated to target
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT RUNNING E_ENVA 00:00:00 00:00:10
GGSCI (HOST) 186> send extract e_Enva status
Sending STATUS request to EXTRACT E_ENVA ...
EXTRACT E_ENVA (PID 11824)
Current status: In recovery[1]: At EOF
Current read position:
Sequence #: 33
RBA: 34904432
Timestamp: 2011-09-21 11:14:47.000000
Current write position:
Sequence #: 6
RBA: 1008
Timestamp: 2011-09-21 11:26:42.426000
Extract Trail: C:\GG\dirdat\enva\ce
GGSCI (ILW177711) 193> stats extract e_enva
Sending STATS request to EXTRACT E_ENVA ...
No active extraction maps.
Where to look next and what is the root cause for this,
thank youall configurations was ok and working fine (meaning data was extracted on source and replayed on target) before extract/replicat processes restart
I did not touch any of the configuration files, after restart processes shows as up & running without any actual errors or rejects on the logs
please find extract configuration file:
EXTRACT e_enva
SETENV ( ORACLE_SID=orcl )
USERID USER_SCHEMA_A, PASSWORD AACAAAAAAAAAAAHAOFVCXAUANCVHIHCE, ENCRYPTKEY DEFAULT
DISCARDFILE C:\GG\dirrpt\e_enva.dsc, APPEND, MEGABYTES 10
REPORTCOUNT EVERY 10000 RECORDS, RATE
NOTRACETABLE
EXTTRAIL C:\GG\dirdat\enva\ce
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('START', null, 'ALL','e_enva')";
SQLEXEC "CALL USER_SCHEMA_A.pkg.event_message('STOP', null, 'ALL','e_enva')" ONEXIT;
TABLE USER_SCHEMA_A.T_TABLE, KEYCOLS (ID_OBJECT);
TABLE USER_SCHEMA_A.T_TABLE_REF, KEYCOLS (ID_XREF, PKEY_SRC, SYSTEM, IND);
logging and supplemental logging enabled, commits performed and again nothing was changed in configuration except that processes was restarted
thank you -
Cannot see control options in the player
I have downloaded a free trail version of macromedia flash 6
on windows machine .whenever i try to open flash movie(.swf) from
the player , the movie is played but i cannot see the control
buttons with the movie .hi
i was able to add control button like play ,pause ,stop with
the movie but i want to present player like layout with the movie
.I am trying to get the player layout like the one we use to get
while watching video on net.The basic idea is to inform the viewer
about the duration of the movie .
Any idea??? -
Excel - Cannot see any new data in Excel Workbook
Hi There,
Wonder if anyone can help, we have a .xlsx file, we have it setup so that only one person at a time can edit the workbook.
When a colleague edits some data and saves the change, I go into it but cannot see the new data. I then do the same but she cannot see the changes and neither can a 3rd colleague. In effect, whenever any one
makes a change in the workbook, no one else can see the new saved data that has been added.
The work book is not protected. It is stored on a server, all users are running Office 2013 apart from
1 who is using 2003, but it doesnt matter as even if a change is made using office2013, another office 2013 client still can't see the change.
It doesn't seem to happen with any other workbooks.
Tried open and repair which didn't work. Also tried saving a new version of the workbook, this works for a while but then the issue comes back on the new version.
Any ideas, as currently we keep having to save new versions of the workbook.Hi,
What's the extension of this particular file ?Try another file format to test this issue.
Did you get any message when try to save the document? Also does this problem happens when use the 'save as' option within Excel to save the file?
Also try to download the excel file to local driver, update the Excel file,then upload it to the server.
Wind Zhang
TechNet Community Support -
When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
Warning: Error in parsing value for 'cursor'. Declaration dropped.
Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
Line: 116
ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
Line: 837
== This happened ==
Every time Firefox opened
== 2 days ago after update.Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
Maybe you are looking for
-
Classic Scenario PO has multiple OA Partner Functions for Vendor
Hi, I have a 'design' issue. My R/3 Vendor has many OA Partner Functions for the different Branches they have and the PO needs to be Faxed to the OA Partner Function number, but the PO needs to be created against the VN Partner Function. So, how do i
-
1.Backup to External drive 2. CoverArt lost after Windows system restore
I recently spent many hours searching for and applying cover art for my music which was mostly ripped before cover art was readily available. Because of this investment, I want to be sure my library is fully backed up. I want to use space on an exter
-
Ai CS4 keeps freezing when I try to open a file - HELP!!!
Mac OS X Tiger - Ai CS4 freezes when I try to open a file from either dbl-clicking on the file or opening within Ai. This happened all the time with Ai CS3 so I upgraded, now its happening with the new version. Do I need to allocate more memory to Ai
-
Cannot open any inDesign CS4 files, "import failed"
Suddenly inDesign CS4 will no longer open anything. When I attempt to open inDesign files it says "import failed". I have trashed my preferences and tried checking "show import options" to no avail. I can create a new document but not open documents.
-
hi, I want to make an item with type of T-list and when user select item(eiter double click on an item or with any other button) so that the item will add to another box or another text item box(same as windows forms you can shift one or more items f