My Gmail account doesn't work anymore with Mail (the box is empty even after syncronization)

Since the update of Mavericks my Gmail account bugs a lot ! (also with the update for Gmail).
I tried to "re-build" the mail box, since it didn't work. And since I did this my Gmail box is empty, like I have no emails... I tried to sync but nothing happens.. I deleted and put again the account but nothing...
Can anybody help me with this?
Thanks a lot !

There is an update available for Mail/Mavericks. Did you try updating.
"Mail Update for Mavericks"
http://support.apple.com/downloads/

Similar Messages

USB personal hotspot doesn't work anymore with 10.6.8 Snow Leopard, iTunes 11.1 and iPhone5 ios7

Ciao
I'm using iPhone 5 with ios7 and Macbookpro with 10.6.8 SnowLeopard.
After updating to iTunes 11.1and ios7 hotspot USB doesn't work anymore, wifi and bluetooth work fine.
In system network preferences iPhone usb connection is not detected.
I tried to change the kext file with the Time Machine's old one but no response!!!
Can somebody help me
Thanks

Anyone has any advice? Or the problem is just the age and incompatibility of the old MacBook Pro 1,1 A1150 (Mid 2006) and the best way will be to change it into something newer?

Snow Leopard as PXE server doesn't work anymore with Debian Lenny

Hello
I was using a box with Mac OS X 10.6.2 as a PXE boot server, providing a Debian Etch installer as boot image.
I wanted to upgrade to the Debian Lenny PXE image, but it doesn't work anymore.
I m not sure how I can debug that. I m a sure of one thing, switching for the Debian Etch image to the Debian Lenny one triggers those kernel log messages during the PXE boot, and the host who tried to boot hanged ( a Virtualbox VM).
+Feb 23 20:34:33 macbookpro kernel[0]: indelayed_cksumoffset: ip_len 50688 (198) doesn't match actual length 212+
+Feb 23 20:34:58: --- last message repeated 6 times ---+
Here is my /etc/bootpd.plist file :
+<?xml version="1.0" encoding="UTF-8"?>+
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
+<plist version="1.0">+
<dict>
<key>dhcp_enabled</key>
<true/>
<key>bootp_enabled</key>
<true/>
<key>netboot_enable</key>
<false/>
<key>Subnets</key>
<array>
<dict>
<key>name</key>
+<string>My subnet</string>+
<key>net_mask</key>
<string>255.255.255.0</string>
<key>net_address</key>
<string>192.168.0.0</string>
<key>net_range</key>
<array>
<string>192.168.0.3</string>
<string>192.168.0.6</string>
</array>
<key>allocate</key>
<true/>
<key>dhcpoption128</key>
<string>192.168.0.10</string>
<key>dhcpoption66</key>
<string>192.168.0.10</string>
<key>dhcpoption67</key>
<string>/etch/pxelinux.0</string>
</dict>
</array>
</dict>
</plist>
My /private/tftpboot/ tree is created from the http://http.us.debian.org/debian/dists/etch/main/installer-i386/current/images/n etboot/netboot.tar.gz archive. I used http://http.us.debian.org/debian/dists/lenny/main/installer-i386/current/images/ netboot/netboot.tar.gz for the Debian Lenny tree.
So, can someone help me ?

I disabled bootp. In verbose and debug, everything seems to go well. The option 128 isn't accepted by the daemon, i disabled it too, the TFTP server is the same server than the DHCP, so it still works.
Here s the log when using the Debian Lenny image, almost the same than with Debian Etch image.
+bootpd[4754]: server starting+
+bootpd[4754]: can't open /etc/bootptab+
+bootpd[4754]: server name macbookpro.local+
+bootpd[4754]: interface en0: ip 192.168.0.10 mask 255.255.255.0+
+bootpd[4754]: interface vnic0: ip 10.211.55.2 mask 255.255.255.0+
+bootpd[4754]: interface vnic1: ip 10.37.129.2 mask 255.255.255.0+
+0.0.0.0 ==> 192.168.0.1+
+10.37.129 ==> link 8+
+10.211.55 ==> link 7+
+127 ==> 127.0.0.1+
+169.254 ==> link 4+
+192.168.0 ==> link 4+
+There are 1 entries+
+1. Subnet 'My subnet'+
+ Network: 192.168.0.0/255.255.255.0+
+ Range: 192.168.0.3..192.168.0.6+
+ Allocate: yes+
+ Lease Min: 3600 Lease Max: 86400+
+ Options:+
+ Code Length Data+
+ 66 4 c0 a8 00 0a+
+ 67 17 2f 6c 65 6e 6e 79 2f 70 78 65 6c 69 6e 75 78 2e 30+
+DNS servers: 89.2.0.1 89.2.0.2+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 8+
+dhcpmessagetype (uint8): DISCOVER 0x1+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP DISCOVER [en0]: 1,8:0:27:6a:89:5e+
state=INIT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP OFFER (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): OFFER 0x2+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: OFFER sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.007299 seconds+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 10+
+dhcpmessagetype (uint8): REQUEST 0x3+
+requestedipaddress (ip): 192.168.0.3+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+server_identifier (ip): 192.168.0.10+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP REQUEST [en0]: 1,8:0:27:6a:89:5e+
SELECT
state=SELECT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP ACK (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): ACK 0x5+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: ACK sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.001884 seconds+

Xperia Neo media server doesn't work anymore with Sony Bravia TV after ICS update!

Xperia Neo (MT15i) updated from 2.3.4 to 4.0.4 (4.1.B.0.431). I did not perform any reset (factory settings) after the update.
Media server does not work anymore with Sony Bravia TV KDL40-NX700. With 2.3.4 it worked correctly before.
When I start the media server on my Xperia Neo and try to view my photos on my Bravia TV it shows connection, I am also able to view different folders on the Smartphone but when it tries to load the photos in any folder on the Smartphone it stops working after a while. Feedback on TV is "cannot connect to media sever". The same procedure worked without any problems when using 2.3.4 before.
Is this a known issue and is there any solution for this?

Wow that is a new one, great find!
I wish I had tested that with my Ray, as I had used the media server feature quite a bit with my DirecTV receiver when on Gingerbread. But too late, it's on the way back to Sony to get rolled back to Gingerbread.
Too many other problems with ICS that have crippled my device.
1) Wi-Fi Hotspot does not work anymore
2) USB tethering does not work anymore
3) LED notification issues for incoming SMS
4) Dialer slow to load
5) HD Video recording skip frames and jitter.
6) Bluetooth AVRCP profile broke (can't use the play/pause button on my car stereo anymore)
If you have not done so take a look at the above features and see what you turn up.
~Cheers~
Bob H
Minneapolis, MN
USA
ST18a Ray

AirPrint doesn't work anymore with iOS 8

wwith iOS 8 update, AirPrint doesnt work anymore with HP printer. Lenova pc works fine. Any ideas what to do?

Hello there, Bkurowski818.
The following Knowledge Base article offers up some great recommendations for troubleshooting AirPrint issues:
About AirPrint - Apple Support
For best results
Make sure your software is up to date. For iOS, verify that your device is using the latest version of iOS available and that the app you're printing from is up to date. For OS X, Use Software Update to update OS X and apps you've purchased from the Mac App Store.
AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
Make sure that your AirPrint printer is connected to your network before attempting to print. Some AirPrint printers can take several minutes to join a network after being turned on.
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
The information below is provided by each manufacturer and is updated once a month by Apple. You can use the Find feature of your web browser (usually Command-F) to search for a specific device in this list. If you don't see your printer or server listed, check with the printer manufacturer for more information.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Account doesn't work on Mac Mail but does on iPhone

I have a IMAP email account with my company that works on my iPhone and in Entourage but doesn't work in Mac Mail. I have tried to copy the settings and even did a full erase and reinstall of Leopard and no one has an idea why it won't work, the hosting company or Pro Care. Any idea out there?

No idea what "My apple ID account doesn't work on my itunes but it does on the web" means.
Please explain

My Gmail account won't work well with my Apple Mail, THe mail won't download into my gmail account and I frequently as requested to put my IMAP password in and it is then rejected.

My Gmail and Cox accounts and won't work well with my Apple Mail, The mail won't download into my gmail account and I frequently am requested to put my IMAP password in, and it is then rejected.I go to mail preferences and put the password in the appropiate place and I am told the password is new and do I want to use it. I reply yes but its not saved. Any suggestions

On the left, you should have a list of keychains and categories. If not, Select Show Keychains from the View menu.
Select the login keychain and All Items in the Category.
In the search field, type something that will help find your account keychains, like "gmail."
Select the keychain for your email account password and delete it.

Exchange mail account doesn't work anymore in MBP

Hello everyone
I am new to Apple products. I purchased my MBP 13" in Aug 2013. Since then I have been facing issues with Mail app in my MBP.
I use Exchange account from my office (Exchange server 2003) and I got the settings from my administrator. I tried installing those settings in my Windows PC and Android Phone, and they all work with no problems. But, with the same settings, it never works in my MBP. Then he gave me IMAP settings for the same account. These do not work too. They worked once for a while (one month roughly) and then I received an OS X update 10.9.2 on 5th of March 2014 and then it stopped working in MBP again. I tried removing the account and added newly, but doesnt work. I tried changing the port numbers, SSL, so on but to no solution. I even contacted the online chat support and telephone support for hours but no one could fix it.
When I go to my administrator, he says it works in all our computers, and its not functioning in your MBP, so he goes raging me to contact apple as he sees no issues from him side. I kindly request someone to help me solve this issue please.
Regards
Vinay

I have the same problem. Thankfully one which was missing came back. I printed it out and made a PDF of it since it was an important one I'd been looking for.
I have three icloud email accounts which folders for each one. Now they mostly come up in my inbox instead of the correct folder and they won't move to the correct one.
Come on Apple, fix this.

[Solved] Alac doesn't work anymore with Gstreamer0.10

Apple Loseless Audio Codec support seems to be broken for me in the 0.10 branch of gstreamer. Before I was able to play ALAC files in rhythmbox and banshee but it does not work anymore. I think the support for ALAC files is integrated in the package gstreamer-ffmpeg.
This problem does't seems to occur in the 1.0 branch of gstreamer as ALAC files work with Totem and it also work with vlc which use dirrectly ffmpeg.
Does someone have the same problem or is it a problem with my system ?
I tried to reinstall gstreamer0.10 and all plugins but it didn't solve the problem.
Last edited by sedutom (2013-04-22 14:18:39)

Put as solved, it works back with the new version of rhythmbox
Last edited by sedutom (2013-04-22 14:19:59)

IPod Touch 1st Generation doesn't work directly out of the box?

I just bought a first generation iPod touch and first things first I plug it into my PC. Nothing happens on the iPod and on iTunes I immediately get a message saying "iTunes has detected an iPod in recovery mode. You must restore it before it is usable with iTunes." So I hit OK and click yes to the message about restoring it to its factory settings, considering that's how it should be anyway since I had literally just taken it out of the box. I finally get a reaction from the iPod, and it's a solid white screen followed by the apple logo, and then for about 5 minutes iTunes says it's "prepaying the iPod for restore..." followed by the error message "The iPod "iPod" could not be restored, an unknown error occured. (1604)" Then the iPod disconnects from iTunes and proceeds to be frozen at the Apple logo screen. I have looked at all the troubleshooting walkthroughs and none of them work because I have never seen a screen on the iPod other than the Apple logo, it seems as though the only way to fix this is if I just take it back and get a replacement

Hello and Welcome to Apple Discussions.
Is the device brand new? - the Second Generation have been around for some time now so I hope you got a good price on it.
Have a read of this article which explains how to deal with the 1604 error:
http://support.apple.com/kb/TS1458
Let us know how you get on.
mrtotes

IWork doesn't work anymore with MacOSX Lion...

I had iWork '09 on MacOSX Snow Leopard and than I choose to install lion and was all right than I reinstall Lion because was really slowly. I didn't find all the iLife '11 and iWork. With iLife'11 I reinstall it from the TimeMachine Backup but I tried with iWork'09 and when I open Pages, Numbers or Keynotes there is a message that says:
Pages cannot be opened because of a problem.
Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any avaiable updates for the application of Mac Os X.
I tried to download the last update but nothing change, and if I wold install it again would mean t buy again all 3 of them....
Thanks, Luca

Luca - uninstall iWork by using Yvans script.
Go to Yvans iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Expand the archive and run the script.
Install iWork from the dvd you have.
Then do the Software update check and install the updates. Otherwise it will not work.

Digi 002 rack doesn't work anymore with Logic Pro 7

Any help much appreciated: Like an idiot, I "upgraded" to Pro Tools 7 software from 6.9.2. Logic 7.0.1 had been running fine with the 002 as my audio interface when I had Pro Tools 6.9.2 installed.
But under Pro Tools 7, suddenly everything sounded terrible. Anytime I played my keyboard, either triggering Sculpture, the EXS24, playing audio, any instrument, it sound like ugly static.
So I uninstalled Pro Tools 7, and reinstalled 6.9.2. That didn't help, which surprised me, because I thought I "went back" to my previous setup. But something must have changed. I did go through some of the forum's troubleshooting tip. I repaired permissions, I trashed Logic and Pro Tools preferences, I verified my hard disk, checked ram, etc.
So now I'm stumped. Anyone have anything I should try?
Thanks much,
Jim

Maybe you need to go to Digidesign.com and find the latest core audio driver and install it ?

Mobileme account doesn't work anymore on version 10.5.8??

I know Apple has a new software program iCloud. Is that the reason a get a blanc page when opening my MobileMe mailaccount?
If so, I need to buy me a new Mac, because I can not upgrade this Mac to 10.7......

All Mac Pro towers can upgrade to 10.7. Only PowerMacs can't. Your profile says you have a Mac Pro. I give a visual comparison of the two towers on:
https://discussions.apple.com/docs/DOC-2455
I'm not sure about Mobileme versus iCloud, all I know is that Safari 5.0 which will run on 10.5 can access some of iCloud's features. Here's where you can get the Leopard version:
http://www.tucows.com/preview/754419
Here's a more detailed list of requirements for iCloud:
http://support.apple.com/kb/HT4759
I would contact iCloud support if uncertain your desired features will be supported without upgrading:
http://www.apple.com/support/icloud/

HT204023 After updating my iphone 4 to ios 7 and 7.0.2 the cellular data doesn't work anymore unlike in the previous versions help please? :(

please help

Hi there xian0623,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
-Griff W.

I have uninstalled, downloaded latest and installed but it still doesn't work. Why are there still files leftover even after manually removal whatever I could?

I am a Windows 8.1 user. I have followed instructions found online. But still nothing works.
McAfee is still saying Firefox is untrusted and will not run it.
I have managed to delete some folders containing Firefox but there are some still remaining.
Why?
There was never a problem before today.

Hi, [https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer this article] will help you to completely remove Firefox.
You should ''only'' download Firefox from [https://www.mozilla.org/en-US/ Mozilla.]
If McAfee is still not allowing it, you may need to look at the settings within McAfee.
Hope that helps.

My Gmail account doesn't work anymore with Mail (the box is empty even after syncronization)

Similar Messages

Maybe you are looking for