My Gmail appearance, Theme, is OK on one Desktop using XP, but does not have the same appearance on the Desktop running on Windows 7. The Theme chosen does not install on Windows 7
If I choose a Theme for the appearance of my Gmail Inbox, using my Dell Inspiron computer running on Windows 7, the new Theme appears on my other computer running on XP, but not on my Dell!
On my Dell, all the messages in the Inbox are separated by a black line, in fact yjere are many black lines and no colors shown on the Windows 7 Dell. This was not there from the beginning, but came about z week ago.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
Similar Messages
-
I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem
Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck. -
Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
JeevaHello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?
We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator. -
I have 3 apple devices and I use the same apple ID for all 3. I would like to create a new I'd for one of my devices, but do not want to loose the apps on that device. Anyone know how I can do this?
Create a new ID:
On the iPod go to
- Settings>Messages>Send and receive and sign out your ID and sign into the other one. Make sure that only her ID email address is listed.
- Settings>FaceTime sign out of your ID and sign into the other one. Make sure that under You can be reached at only the newID email address is listed
- Settings>iCloud and sign out and sign in with the new one
- Settings>iTunes and App Store and sign out your ID and sign in with the new one.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account. -
I am trying to combine multiple pdf's into one, using preview, but when I drag the additional pages they show up as separate documents. When I drag the doc in a line would show up in the past, and if I went above th eline all was good. It doesn't have a line, and no matter what I try I am having no success.
Please help!According to an Apple Support article, unless there are unforeseen issues
in file ownership or permissions, the combining of .PDFs should be simple.
•OS X: Combining PDF documents using Preview - Apple Support
There are a few variable and similar methods, some change with version
of OS X in use; some vintage OS X may vary a little in the process...
A variety of similar topics appear in search results, with terms:
" mac os x combine pdf into one " such as this page shows...
https://www.google.com/?gws_rd=ssl#q=mac%20os%20x%20combine%20pdf%20into%20one
If the system is older than Mavericks there may be other methods to try.
Suggestions are among linked results in the search. I see a few fair ones.
•Here's another that offers generally similar suggestions...* this info looks OK, extra links, do not:
http://osxdaily.com/2014/06/27/how-to-join-multiple-pdf-files-into-a-single-pdf- document-in-mac-os-x/
{ note: avoid clicking on links to products in * this ^ page, since they likely will not help & may be adware prone }
If you have a problem after trying other methods, based on an OS X
your computer is running, post back with more exact information...
Good luck & happy computing!
edited -
I have the apple usb stick to install lion but when I put it into the usb port it does not appear in finder? How do I get access to it to install?
Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.
-
Just installed Server 2012R2 but I dont have the Windows Store available to me
I did a fresh install of Server 2012R2 and I need to install the Dynamics mobile apps for testing and development in my environment but don't have the Store available, while it is available in my Azure environment.
How can I install the store?
ThanksHi LeCrag,
The following KB can give you more tips,
Storage
http://azure.microsoft.com/en-us/services/storage/
About the Windows Azure Support question,please post to the Windows Azure Support forum.
Windows Azure Support
https://social.msdn.microsoft.com/forums/azure/en-US/home?category=windowsazureplatform%2Cazuremarketplace%2Cwindowsazureplatformctp
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
I have a SharePoint 2010 site with two discussion boards. I added one additional field to each of the boards: a lookup to another list to link the discussions to individual projects. I need 2 different boards because they have different posting permissions
(one is open to all for comments, and one is open only to the project team to post but everyone can read).
When I go to the pages for each of the discussion boards, they work fine.
But I'm putting together a page for individual projects, and want to have web parts for both discussion boards on the same page, showing the discussions related to the selected project.
I am able to add one of the discussion boards to a web part in the page, but when I add the second discussion board to the page, the new web part contains:
One or more field types are not installed properly. Go to the list settings page to delete these fields.
Correlation ID: blah blah blah
I've searched for similar postings, but mostly I see this error message related to migration from 2007 to 2010 -- this is not the case here: I created both discussion boards, and the whole site, in SP 2010. I've also found this message related
to coding errors using SPQuery. I am not doing any coding here, just using the built-in SharePoint 2010 Edit Page -> add a web part -> select the discussion list. I tried doing it from SPD with the same result. I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine. Sorry for the wild geese in my original question. -
Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?
It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question" -
We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal -
I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks
Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?
It should be in the Users/ Shared folder.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
Regards
TD -
I've recently started to use Numbers on my macbook pro but when I try to sync to iCloud it asks me to create a new iCloud account. Problem is I already have one and that's the one I want to use.
Looks like I have the same situation on my iphone.
The only option I'm being given is to create an lCloud account.
Any guidance? Thanks.The last thing you want is a second iCloud account. Try logging out and back in in System Preferences. If that doesn't work, I'd get AppleCare on the line.
Jerry -
Can i use my previous apple ID on my new iPhone ? It's asking for a new ID but i only have the one email address
Yes. We need more details...exactly what do you mean by "asking for a new ID"? Where do you see this?
Maybe you are looking for
-
Why won't my macbook pro recognize my phone's usb cable?
I have the samsung galaxy sII, my phone is connected so to transfer my music into my mac but I can't find my phone anywhere in my mac, it wont recognize it. Can someone help me or tell me what is the problem??
-
Hi All What exactly is Profit center planning and how is it implemented in BW. I know few things about PCA and I know the cubes and datasources for this, but I am unable to find anything for PCP. I tried SDN as well as help.sap.com Can you guide me i
-
whenever i invoke the method getDate(), the DateField resets to its initial value and i don't want that to happen... here's my code: class DateInputForm extends Form implements CommandListener{ private final SalesMIDlet m; public Date curre
-
My iPad's internal keyboard keeps freezing and not responding.
I'll type on the screen keyboard and nothing happens for a few minutes. The whole device just freezes. After a while the keys will slowly and limpingly highlight and appear in whatever I'm trying to type. This occurs in all apps, from the device's
-
Migrating from Marimba 8.1 to Configuration Manager 2012 R2
Good morning all, I have been tasked with architecting a migration from Marimba 8.1 to Configuration Manager 2012 R2 and I noticed that there is almost no material available in the web about this, can someone provide whatever insight information poss