My Google bookmark list dissapears after two seconds

My Google bookmark list disappears after two seconds

Thanks for everyone's response. I tried many of your recommendations including resetting Firefox. Initially, it appeared as though it may have been a result of the Facebook messaging service that I had but that ended up not being the problem. I then decided to use XMarks instead of Firefox Sync and so far that seems to be the solution my bookmarks library is currently working flawlessly.
I'm going to guess and say that Firefox Sync sync's your bookmarks in real time and so whenever you make a change it slows things down initially. XMarks doesn't sync in real time but only when the network is idle and therefore doesn't cause these lags after making changes.
That's just my guess. Thanks again for everyone's input.

Similar Messages

  • I downloaded the new operating system and all my contact details,address boof and numbers are GONE?When I receive a test email it dissapears after 30 seconds.ISP is Cox in San Diego and they don't have a clue?

    I downloaded the new operating system and all my contact details,address boof and numbers are GONE?When I receive a test email it dissapears after 30 seconds.ISP is Cox in San Diego and they don't have a clue?

    Hello Brian Delaney,
    It sounds like you are trying to send emails but for some reason, thousands show activity. I would start by re indexing the mailbox to help troubleshoot the issue:
    1.Quit Mail if it’s open.
    2.In ~/Library/Mail/V2/MailData, delete any file that begins with “Envelope Index,” such as Envelope Index or Envelope Index-shm.To show your home Library folder, hold down the Option key, then in the Finder choose Go > Library.
    3.Open Mail.Mail creates new Envelope Index files. This process may take a few minutes, depending on how many messages Mail is reindexing.
    Mail (Mavericks): Reindex messages
    http://support.apple.com/kb/PH14876
    If the issue persists, I would next remove the account, restart the computer, and re add the account:
    1.Choose Mail > Preferences, then click Accounts.
    2.Select an account, then click Remove.
    Mail (Mavericks): Remove mail accounts
    http://support.apple.com/kb/PH14944
    Removing an Exchange or IMAP account doesn’t permanently delete the account’s mailboxes and messages because they’re stored on the mail server. To retrieve the account’s mailboxes and messages from the server, add the account again in Mail.
    To add the account again, click the  rather than the  as described above and retest the issue.
    Thank you for using Apple Support Communities.
    Take care,
    Joe

  • I have a problem with Adobe Reader that the page dissapears after 30 seconds or so

    I am having a problem with one of the Companies that sell PC parts as their Parts list is in PDF format, when I click on their page Adobe Reader opens up after 30 seconds or so the screen goes blank, and I cannot read the PDF.
    I have Re loaded the Adobe, and I am running Firefox vr 5.
    Below is the Website I am looking at.
    Many Thanks
    Peter Harding
    http://www.msy.com.au/Parts/PARTS.pdf

    You need to buy the plug-ins you are using. This is a demo mode spoiler from some third-party plug-in.
    Mylenium

  • Why are some of the icons in my Bookmarks list missing after 8.0 update

    I installed the 8.0 update a few days ago, and when I opened my Bookmarks lists some of the icons associated with the various websites are missing. Is there a way to correct this problem?

    I don't know how many photos you're trying to post on one page but if you put too many PCs using Internet Explorer may have problems loading the page.  I prefer to keep the number down to less than 50 and have more than one page which will be indicated by the page links at the top of the thumbnails:
    These smaller pages will load faster and in more browsers.
    OT

  • Video stops after two seconds

    I've had a Macbook for a little over seven months, and this problem just started showing up a few days ago. It's the video. It will start playing for the first two seconds and it'll just stop there. It happens to every video I play. I've tried different DVDs so it's not a problem with the DVD itself. I also tried viewing videos on YouTube, and the same thing happens. I could move the bar thing around, but it'll just play for another two seconds. What's wrong, and how can I remedy this problem?

    Someone told me to do a software update. The video works now.

  • Display disappearing after two seconds

    My Macbook (about 2 years old) was fine all of last night, but this morning I opened it up and the display disappeared after a minute. Now it disappears after just a brief second.
    I can toy with the brightness bringing it down all the way then up one, and it appears and then disappears quickly. Same thing happens when I close it and open it again.
    Anybody got any ideas?

    Not sure but it sounds like the inverter, which is the power supply for the backlight, is failing. Do you have an Apple Care extended warranty?

  • Ipod Classic pauses then restarts after two seconds

    I have Ipod Clasic 160 - recently it has started pausing then restarting within a second or two. It is mainly (but not exclusively) happening on lossless tracks. I have seen this has come before on teh forum - but not a definitive fix. I've tried the 5 Rs. Any ideas?

    Bump.

  • I cannot send email in hotmail account and insert buttons dissapear after 4 seconds

    I am able to receive emails in hot mail account but cannot send.
    This has been the case for the last two days.
    Have the same problem in IE.
    Noticed insert buttons disappear when I click on new
    Same in IE

    Ended up calling my service provider to figure it out. They couldn't but again gave me all the perameters to enter into an account. I had to cancel the account on my phone and set up a new one. I had to enter the information more than once before the phone would actually save it. Lucky me, it did not lose all the emails I had stored on the phone. No help from Apple!

  • When I open mail on my iPad it's closing after two seconds...

    Does anybody know what's going on with that?
    What's the fix?

    Try this:
    • Turn the iPad off and on again (hold the sleep/wake button for about 3 seconds until a red slider appears with the label "slide to power off")
    • If it din't help, try a hard reset - hold the sleep/wake button and the home button simultaneously for about 6 seconds, until the iPad tunes off. Then turn it on again.
    • Go to "Settings - General - Reset" and choose "Reset All Settings"
    • Remove the Mail accounts (one by one) and check again, if it is fine then try to install again.
    By the way, don't forget to mark the helpful answers in the tread as solved/answered (if so), that will help other users to find a solution to their questions quickly…
    enjoy your magic machine

  • My apple calendar shuts off after a second on some days not others

    My google calendar turns off after a second on some days and not others

    Hello JPhardboiled,
    To save battery power, the camera turns off automatically after 1 minute of non-operation. To turn on the camera again, just press the shutter button halfway.You can change the auto power-off time with [: Auto power off] Setting the Power-off Time/Auto Power Off To save battery power, the camera turns off automatically after a set time of idle operation elapses. If you do not want the camera to turn off automatically, set this to [Disable]. After the power turns off, you can turn on the camera again by pressing the shutter button or other buttons.1 Select [Auto power off]. Under the [] tab, select [Auto power off], then press <>.2 Set the desired time. Select the desired setting, then press <>.
    Even if [Disable] is set, the LCD monitor will turn off automatically after 30 min. to save power. (The camera’s power does not turn off.)

  • Mails stored as drafts are dissapearing after 4 secs.

    Hi,
    I hope that I am not off topic here.
    I am used to mail - I am not interested in changing to another non-apple client...
    Since the latest security update for 10.3.9
    i am having issues with my mail program 1.3.11 (v622/623).
    Many users are reporting issues with indexing function, this works fine here...
    Suddenly when trying to get new mail it says that there is a problem with opening the inbox. (propose a protected openening/quit/...)
    I chose always quit. After a re-launch I usually am fine again. This issue returns from day to day and is really annoying.
    Second issue is that stored mails in the draft box are dissapearing after 4 seconds. This is happening each time I open the mail program. The drafts re-appear when I am saving a new draft, but they are dissapearing in the same way when I restart mail after a quit.
    I trashed all my default mboxes.
    This won't help. I rebuilded all boxes - this won't help either.
    So, any help is very appreciated.
    Thanks, Michael
    the draft mbox:
    tableofcontents 8KB
    mbox 4KB
    content_index 4KB

    Hi Donald,
    thanks for your attempts helping me out of this mess.
    I checked all my settings.
    I created a new account.
    The dissapearing won't go away.
    From time to time, when switching from inbox to sent box or trash
    I am getting a message window:
    Das Postfach „~/Library/Mail/[email protected]/Drafts.mbox“ wird zur Zeit von „xxx xxx“ auf dem Server „xxxuserxxx.local“ benutzt. Wenn Sie ein Postfach öffnen, das bereits benutzt wird, beschädigen Sie es möglicherweise.
    schreibgeschützt öffnen or beenden or dennoch öffnen
    (Sorry, this is German!)
    In English it would be something like that:
    The Postbox „~/Library/Mail/[email protected]/Drafts.mbox“ is now used by „xxx xxx“ on the server „xxxuserxxx.local“. Opening a postbox which is already open could damage this.
    Three options:
    protected opening or quit or opening in any case
    But I have another partition with a 10.3.9 running (without that sec. updates).
    There is mail 1.3.11 (v622) active - it is running normal without any issues.
    So I am reckoning that the newer version v622/623 is instable here....
    Would it be recommended to delete a few plist files? Which ones.
    (it is not a big issue for me to fill out the forms on a restart)
    Greetings
    Michael

  • My mail app on iPad 3/3G won't stay open, opens blank for two seconds then quits. Thanks for your help.

    IIt's strange. I upgraded to iOS 8.3 and now my mail app won't work at all. It opens with a blank mail screen,mouth after two seconds or so it crashes. doesn't show even a piece of mail text. Please help me. Mail is such a major part of life/iPad. Thank you all!

    Try to reset your iPad then force close the mail app
    Reset
    Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.
    Force close an app
    Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
    If neither of those work you may want to go into the settings, mail, contacts and calendars, delete your mail account (it only deletes it off your iPad, doesn't delete it from existing), then exit out, go back in and re-add the info. See if that helps to clear things up.

  • The CPU fan starts with the case switch on and the system stops after 2 seconds

    Hi,
    I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
    The CPU fan starts when I switch on the power with the switch on the back of the case, but stops after two seconds. I don't get anything when I push the Start button of the case.
    At the beginning I got some feeble orange light on the D-bracket LEDs. Now, there is nothing at all.
    I have tried to do a CMOS and also to put the Mobo out of the case after having disconnected the HD, the DVD reader, the floppy disk reader and all the Front panel connectors ===> nothing changed.
    The Power capacity of my case is 300 watts. I had computed on Power Supply Wattage Calculator (http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php?cmd=AMD) that it is quite sufficient for my system.
    Other materials on my system: the MSI FX5200-T and a PQI RAM PC 3200 which worked well on a former MSI Mobo (K7N2 Delta). I don't intend to keep this RAM on my new system but I use it to test it, before installing the Corsair Value which are on the system with which I write this post.
    Thank you in advance for your help.

    Finally, it appears that I had damaged the motherboard and the CPU.
    When I installed the CPU, I hesitated because the User's guide said that "the gold arrow should point towards the lever pivot", whereas the illustration and the AMD's one pointed towards the opposite corner. I had finally made the good choice (that of the illustrations), but I have certainly displaced some pins of the processor while hesitating.
    The shopper told me that MSI will never agree that its text had troubled me and refused to give me a new motherboard.
    I have finally bought an ASUS motherboard and, as I was fed up with the computer building, I paid a technician to do this job.
    I would like to mention two other mistakes in the MSI K8N Neo User's guide:
    - it devoted one page to the installation of the retention mechanism which was already installed.
    - there was no explanation about the mention of two "Power LED" connectors.
    I acknowledge that I have been stupid, since I should have asked the question of the direction of the golden arrow in a forum, where I would have found very quckly the right answer to my hesitation.
    However, I am revolted that MSI does not acknowledge that a grave mistake and two troubling omissions in the User's Guide can lead novice people to grave failures.
    I'll never more have confidence in a company that make such mistakes and does not assume its responsibility.
    Once again, thank you for your help.

  • There is an unauthorized address on my jabber buddy list.  After deleting it, it re-appears after about 5 seconds.  How can I delete it permanently?

    There is an unauthorized address on my jabber buddy list.  After deleting it, it always re-appears after about 5 seconds.  Is there a way to get rid of it permanently?

    Hi,
    Are you Logged in ?
    You can only delete names from a List if you are logged in.
    If you are logged in two (or More places) then they may override any login you are using.
    9:20 PM      Wednesday; January 11, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Often after I've selected a Bookmark there are remnants of the list of Bookmarks still on my screen outside of the Firefox window. How do I get Firefox to not leave remnants of the Bookmark list?

    Often after I've selected a bookmark from my list of Bookmarks in Firefox the screen doesn't refresh properly and parts of the list of Bookmarks remains on the screen. The remnant is always above and/or below the window that contains Firefox. If I move the window around the desktop gets properly repainted. However there is still a remnant of the bookmark list in my task bar. Is there a fix for this anywhere?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    In Firefox 4 and later [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

Maybe you are looking for