My gradient points are close together... how do you tab to the next one?

Anybody know how to do this? It's a royal pain to spend time trying to click the pixel-wide edge of a gradient marker when they are close together.
Sometimes selecting them in the Canvas helps with the gradient tool, but even then they're sometimes too close together. Any shortcuts?

I also need to know how to select gradient multiple points at a time (so I can slide two adjacent points without having to fiddle with/fix their relative separation)

Similar Messages

  • HT4400 how do you advance to the next page with focus 40 blue

    how do you advance to the next page with focus 40 blue

    Hello,
    To place your own images for previous and next button you need to use the fill feature. Please check the steps below:
    1. Go SlideShow options and Uncheck Edit Together.
    2. Select the next button and click on Fill to open Fill panel.
    3. Click On Add Image and select the image you want to use. Also select the fitting type as "Scale to Fill" or "scale to Fit "and Position as "Center".
    4. Do the same for previous button.
    Regards
    Vivek

  • How do you scroll to the next page in apps when it says "1-9 of 20"?

    I am new to using an iPad.  I have been tyring to load some free apps.  When looking for apps, it might say "1-9of 20", then "View all".  When I hit view all, it only shows me 12 apps.  How do you get to the others? 

    'L-R'  you mean right to left, starting the side where it has the little box at the top 'Sort by" - This is for the multi app view (1-9 of 20) you mentioned.
    If already on an individaul Apps page you have to quit back by tapping the box in the top left corner marked 'Search'.  Note that default view is to display both iPad and iphone and selecting one or the other individually may result in less than the original total, dependent on availability for that device.
    Use just one finger place it on the screen then draw it across the screen - avoid tapping as this selects.
    Best regards, Ct

  • How can you automatically start the next Podcast?

    When an audiobook finishes, the next audiobook automatically. How can I get podcasts to do the same? I listen on bike rides and it is difficult to have to switch to the next podcast.
      Windows XP  

    Hi
    Welcome to Apple discussions.
    2 options (neither of which are particularly great)
    First - drag the relevant podcasts into a playlist in iTunes, sync your iPod and then off you go!
    Second - Create an on the go playlist of the relveant episodes on your iPod.
    I think the thinking behind this is that Apple assume people only have one podcast at a time to listen to i.e. one a day/ week etc. You are right though, it would be nice just to have a preference to set to do what you want.
    You should leave your feedback here:
    http://www.apple.com/feedback/ipod.html

  • My emails from the same person are grouped together, how do I undo this so that each email stands on it's own?

    1.My emails from the same person are grouped together, how do I undo this so that each email stands on it's own?
    2.Currently my emails are grouped together if the subject is the same, how do I undo this?
    3.My emails are "folded up", with tabs like "See more" - how do I undo this? - I want to see the full email at once without having to click multiple times in the email on "show more" etc.
    4.When I send an email to some one, a copy of that email is sometimes sent to me?? - this confuses my and make me think I by accident sent it to myself, but when I check it in the SENT box, it the correct recipient's name was used. How to fix this mystery?
    Please help, I am not good with computers so you will have to keep your answer simplictic or in steps.
    Thanks!

    Click the View menu in the Mail menu bar and uncheck Organize by Conversation.

  • Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

    Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

    Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
    Quick answer:  Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
    If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields.  If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

  • Passcode are all numbers how do you change to letters

    passcode are all numbers how do you chane them to letters

    This might help
    Press the SETUP button on your printer's control panel.
    Using the arrows, select DEVICE SETTINGS, press OK.
    Select LAN SETTINGS and press OK.
    Select Wireless LAN Setup and press OK.
    If a message appears to press the WPS button, press STOP to cancel.
    Select STANDARD SETUP from the next screen that appears and press OK.
    Highlight your access point or router and press OK.
    Press OK again to confirm the access point name.
    Enter your passphrase using the keypad to the right.
    At the screen where you enter your passphrase, in the top right corner of the LCD screen you should see a :1 . This indicates that you are in numeric entry mode. If you press the asterisk key (*) it will switch to :A or uppercase letter mode, pressing asterisk again with switch to lowercase letter mode. To enter a letter in either letter mode, you will press the associated number key to cycle through the available letters. For example: To enter a letter "c", you will press the "2" key three times.
    Press OK when done.
    The LCD screen will say "Connected" if the password is correct.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

    I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

    From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
    http://www.thexlab.com/faqs/trash.html

  • HT2506 how do you view what the dimensions of a document are in preview?  i.e. 8.5 x 11 or 11x 17

    How do you view what the dimensions of a document are in preiew?

    Right or control click the document file then click Get Info.

  • How do you tell if the advanceddatagrid scroll bars are showing?

    How do you tell if the advanceddatagrid scroll bars are showing? This is because the grid crashes when mouse scroll events are firing when theres not enough data so that scroll bars are not showing

    Basically when you have enough data in a datagrid so that it cannot all be displayed at once, you have the scrollbars showning allowing you to scroll.When you can see all the data or rows at once you cannot see the scrollbars. What I need to test for is whether these SB's are currently showning.
    Hope that is clearer.

  • Cpu has 4 usb's on the rear. 2 are 2.0 and 2 are 3.0. how can you tell which one is which

    Just bought new HP PAV p7 1380t.  It has four USB's in the rear.  According to specs
    2 are 2.0 and 2 are 3.0  How do you tell which one is which?
    This question was solved.
    View Solution.

    Here are the specs and configurable options for your HP Pavilion p7-1380t Desktop Computer. Here are the specs for it's H-Joshua-H61-uATX (Joshua) motherboard. According to the motherboard specs, this system has 4 USB 2.0 ports on the back as shown below;
    (#1) USB 2.0 x 4
    Typically, USB 3.0 port are blue and have a stylized "SS" symbol near by. There does appear to be a USB 3.0 header on the motherboard, which could be used for front or rear ports.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How do you easily find the movies that are on sale?

    How do you easily find the movies that are on sale?  I can't seem to easily find any of the $9.99 HD movies or the $5- $6 non-HD movies.

    Go to Settings>iTunes & App Store and turn Videos off under Show All.

  • The area on my toolbar where you can change the white balance mode is now gone from my toolbar.  How can I get it back?

    The area on my toolbar where you can change the white balance mode is now gone form my toolbar.  How can I get it back?

    Your basic panel must have been accidentally deselected.
    Simply right-click on one of the other panels e.g. Tone Curve and choose basic again - see image below.
    You can also select solo mode, if you prefer to work in one panel at a time with the others collapsing automatically when you click on another tab.

  • What happens when you earn points on here? how do you use them

    what happens when you earn points on here? how do you use them

    https://discussions.apple.com/static/apple/tutorial/reputation.html

  • How do you shut off the apps that are running? Before the update you hit the button twice then it would showing all the apps and u can then shut them off.

    How do you shut off the apps? Before update I just hit the side button twice then it would show all the apps. Then I would shut them off.

    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
    View running apps.
    Double-click the Home button to reveal the multitasking display. Swipe left
    or right to see more. To switch to another app, tap it.
    Quit an app.
    If an app isn’t working properly, you can force it to quit. Drag the app up from the
    multitasking display. Then try opening the app again

Maybe you are looking for