My graphics tablet doesn't align with screen in Photoshop Elements 10

Hello,
I had been using my Wacom Bamboo tablet on Photoshop Elements 10 with no problems whatsoever. Today it seems is a different story. As you can see in the image below, the tablet seems to not be aligned correctly with the screen. I am limited to draw in only the section I have scribbled in. I am unable to access any of the screen to draw, use tools etc because it just wont let me when using the tablet. When I use the mouse it is fine.
I have adjusted all of the settings and made sure everything is correct with my tablet driver and the settings of my tablet, I have no problem with any other program on my computer. I have two tablets and the same problem happens with both. I have tried un-installing Elements but the problem is still there when I re-install it.
I really am at a loss, it seems like such a simple thing to fix yet I am completely stumped on this one. Please help as I use my tablet on a daily basis and this really is gutting!!!

PSE will respect the Wacom settings and sensitivities. Go to your tablet control panel and check your pre-sets. Or select he brush tool in the Elements Editor and change the settings to suit.

Similar Messages

Green Screen and Photoshop Elements 11?

Hi. I have tried multiple ways to remove the green screen in photoshop elements. Being new to this program, I've found ways it was done in previous versions that don't appear to be in 11. The MagicWand doesn't get it all out (gotta love hair with green in between ). Is there an easy way to be able to put a digital background on?
Thanks!!
Khrista

It appears I wasn't told the truth today by Adobe when I chatted with their rep on-line. I specifically asked "if Photoshop Elements 11 did Green Screen" and I was told "Yes". They even show it on the packaged version as I saw it in Fry's this morning. But there is no mention of this in the 'features' section on their website. Someone is playing games.
I then purposely purchased an upgrade to my version 10 to 11 to do green screens and feel I've now wasted $85.
I was wondering why Green Screen Wizard was selling a plug-in for PS Elements 11 if Adobe already had it in there. I guess I know the answer to that one also.

Problem with Photomerge Exposure, Photoshop Elements 13?

Problem with Photomerge Exposure, Photoshop Elements 13?. Why does Photomerge Exposure not give me a finished DONE photo. If I open 2 photos, it will merge then, and when I press DONE I get a new photo file that I can save. However, if I open 3 photos, and go through the same process, the software analyzes the photos, I get a new image, BUT when I press DONE, the new image vanishes???? I can open the same 3 photos in Elements 8 and it works fine. any ideas please.

I, too, am having problems in version 11 with Photomerge Exposure. I can merge the 3 photos successfully with version 10. In version 11 when I click done, I am taken back to the Expert mode of the Editor but the merged photo in the photo bin is not accessible. When I first return to the editor, one of the original images (before merge) is selected. When I double/click on the merged photo it doesn't become the active image. In fact, any image I double click on momentarily becomes the active image and then jumps to another one.
The merged photo is visible in the photo bin but I can't select it.
I am running version 11 on my MacBook running OS 10.6.8
Mary Lou

How do I see a photo full screen in photoshop elements app?

How do I see a photo full screen in photoshop elements app? From what I can tell, I can't see a photo full screen in iphoto. I need full screen!

A file with a .PSA extension is most probably a catalog file from an older version of Elements (up to PSE5). To be able to use it with a newer version (including PSE12), you'll have to convert the catalog to the new format. In the organizer, open the 'File' menu, select the catalog manager (shift Ctrl C) and click the convert button, browse to the .psa file. Your catalog will be converted to the new format.

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the

Hello, i have a problem with the adobe photoshop elements 10 in the organizer impossible to use the magic mouse, Where can I configure this one?
Thank you.

What do you mean by "impossible to use"? I use a magic mouse with PSE all the time. What are you wanting to do that isn't working?

How do I locate the Software Setup screen within Photoshop Elements trial product?

How do I get to the Software Setup screen within Photoshop Elements 11 trial product (to convert from trial to paid-up)?

If you are on trial application, so whenever you launch Photoshop Elements Editor, it will give you the option to serialize your product.

Can I use a graphics tablet such as Wacom with Keynote?

I would like to be able to use my Graphics tablet with Keynote to write on my slides while teaching. I am able to use the pen tablet with Powerpoint, I just select pen for pointer and pen color. How do I do this in Keynote?
Thanks for your help,
Jackk

I don't think you can do that within Keynote itself. Is there anything useful in the Inkwell preferences? I have never used a tablet with a Mac before, but I think that Inkwell would have some kind of annotation feature.

24" iMac stand doesn't align with the body??

When I look at my 24" iMac, the unit itself doesn't align very well with the stand. I noticed that from many different angles.
It looks a little bit wired, but the unit swing very smoothly.
Does anyone has the same problem too??
Will it be better if I remove the stand and install it again?
Thanks

Welcome to the Apple Discussions.
It takes a special card that you must purchase from Apple to detach the stand from the iMac. I would suggest that if it doesn't appear to be attached correctly that you have an Apple Certified Technician check it out for you and make any necessary adjustments.

Project background doesn't align with stage after rescaling project

Hello,
I think I discovered a bug that may or may not have been resolved in later versions of Captivate. I'm using Captivate 5 (5.0.3.631) and as much as I'd like to have a newer version, my employer only has this version purchased right now. I'm posting this here because I realize this may not be a bug and there may be a workaround, in which case maybe I can learn something!
The issue appeared when I recently had to rescale my project to make room for a closed captions popup area at the bottom of the stage. (I don't want it to overlap previously positioned content.) Do do this, I rescaled my project to be 25 pixels taller than it was previously, and I selected the resize option to keep the already placed project contents aligned at the top left of the project rather than to scale everything to fit. Just as I hoped, this extended the stage out from the bottom by 25 pixels, much like resizing a canvas property in photoshop.
I then edited my project background images to match the new project stage dimensions in order to cover up the now visible 25-pixel-tall strip of uncovered stage. I imported the new background image onto my master slide in the same way I placed the original one, and this is where the problem appears. The taller image, configured as a "project background", will not align with the stage anymore. Instead, it's hanging off the top of the stage by 13 pixels and not reaching the bottom of the stage by 12 pixels (adding up to the 25 pixels I increased the project height). I purposefully placed the image as a project background rather than just dragging it on the stage of the master slide. My reasons for doing so are somewhat complicated, but mainly are because I need the master slide background to not interfere with the Z-order of items on the regular slides. Apparently a master slide image on the stage of a master slide will cover up items set to display for the rest of the project. Perhaps this is a bug, too?
Anyway, back to the problem at hand... I had everything working fine before I rescaled my project, but now the imported background image won't align with the stage. Because it's set as a project background, there is no way to reposition it on the stage... it just kind of lands where it lands. It appears that when I rescaled the project, Captivate remembered where the center of the "old" sized project was and didn't recalculate the center of the "new" rescaled project. So, when I place a larger image in the master slide (as a project background), it is centering it where the old, smaller project used to be... thus resulting in the larger image to not be centered on the stage.
I figured out a workaround in the mean time by placing the background image on the stage of the master slide (not as aproject background), and by moving more things to the master slide that I don't want to be covered up. This actually seems to be a more elegant solution that what I had previously, but I'd still like to know if what I'm experiencing is a bug or not.

Ok just found a workaround/solution.
(always happens right after I ask, for some reason).
Rescaled my project but kept the size and positions the "same and centered".
Then I replaced all my background images with bigger versions (previously I had cropped them at the right and bottom).
Now my backgrounds were all great, but all my objects were too low.
All I had to do was ctrl+A to select everything on a slide, and then change the Y value for the whole bunch to zero.
This magically placed all objects in their correct respective spots.
Hope that helps someone out!
Russ

Working with iphoto AND Photoshop Elements

Hi,
I currently use iPhoto 5 and want to begin using Photoshop Elements. I am wondering if someone could share their ideas on how to go about using both programs. Here is my objective. I think that I can get more out of my photographs but moving up to Photoshop Elements. I think that perhaps this program can make better black & white photos as well as color (has more adjustments that are capable of specific controls).
That said, once I have finished with a photo, should I then import it into iPhoto?
What type of work flow routines do others use when they have both of these programs?
Thanks for any ideas!

If I may take the opportunity to expound on this thread to incorporate my own question...
I too wish to edit in Elements and retain iPhoto as an organization tool, but have read that saving to jpg is not the best idea. After editing and/or flattening tiff is the better option, no? Anyway, the default directory in Elements in the save as dialog I believe is to the same roll the original came from, but often after an edited jpg is saved into tiff iPhoto doesn't see it. Stoplight tells me it is there, but there is apparently something about the process that iPhoto doesn't like.
Lori, can you be kind enough to expound on this?
Thanks.
ps: Tatty - I took a Elements class at a local high school and learned bunches. Alternatively www.totaltraining.com has a nice DVD available too
Power Mac G5 Dual 2.0 Mac OS X (10.4.5)

New issue started with install of Photoshop Elements 12

Hello,
I have a Mac computer, Mac OS X 10.7.5. I use Lightroom 5, Photoshop CS6 (not CC) and Photoshop Elements. Things worked smoothly, using PSE 11, until I recently installed PSE12. The PSE12 installation went smoothly, and I updated my LR5 Preferences to indicate PSE12 and CS6 as external editors. As I said this worked fine with CS6 and PSE11. Now when I right click an image in LR5 and choose Edit In > PSE12, PSE12 launches but it does not open the image. I changed the Preferences back to indicate PSE11 as an external editor and now it does the same thing, whereas it worked before. If I choose to edit in CS6 everything works fine; CS6 launches and the image opens.
Now, when PSE11 or PSE12 starts the first screen I see is the one where I choose between the Organizer and the Editor. I do not remember seeing that before, when things worked. I choose the Editor option and it opens just fine but the image I selected in LR5 does not.
Anyone have any suggestions?
Thank you.
Hector

OK, I am an idiot. I found the answer. Hopefully I am not violating Forum etiquette but here is the answer: http://lightroomkillertips.com/?p=4876
This article references PSE11 but it works with PSE12 also.

Floating screen within Photoshop Elements

I am running Photoshop Elements 12 on a Macbook Pro with a Retina Display. In Photoshop Elements Organizer the screen is floating up above the menu bar and I can not access the menu to create new albums, close program, or see the top of my photos at full screen. I have seriously spent hours online googling the issue but I have not found out a way to move the screen back down. I have changed the resolution which makes it smaller but the top is still missing. I have clicked on every setting and preference options on my Mac and within the Elements program and nothing has works. The screen will not drag down either. I would appreciate any help someone can give me! And advice of how to avoid this happening again...

If you are on trial application, so whenever you launch Photoshop Elements Editor, it will give you the option to serialize your product.

How to send emails with photos using Photoshop Elements 12?

I did everything according to the instructions, defined e-mail address, got the code and confirmation of the adress, but still when I try to send meile in the end there is symbol that the computer is trying to perform this task, but the minutes passes by, and nothing changes. I have spend a lot of time trying to fix it - with no success. I use Windows 8 and Microsoft OutLook. I have no problems sending other thing. I also have Mozzilla Thunderbird om my computer, but it is synchronised to OutLook (can use both of them, whichever I want).
I bought Photoshop Elements 12 to send and edit photos. I'm close to that to give up this product, despite the fact that the rest of his functions as a judge very successful. It's great that there is a possibility to get a refund of the purchase of this product for 30 days from the purchase over the internet.
Please, help me.
Marcin

Do you see Adobe Email dialog hidden along the right edge of the screen? Please try dragging that in the middle of screen and then send.
Thanks
Andaleeb

New Problem with cropping in Photoshop Elements 8.0

I use adobe photoshop elements 8 for years already and it has worked perfectly up until now. When I crop a picture instead of it cropping when I click on the check mark (as in the past) it reduces it to a small window with just gray in it....no reduced picture at all. Did a setting get thrown off or something? Help is appreciated!

At the far left end of the options bar is a tiny triangle. Click it and choose Reset Tool from the popout menu.

My graphics tablet doesn't align with screen in Photoshop Elements 10

Similar Messages

Maybe you are looking for