My gray scales show up in shades of purple and print that way

My hard drive died and I purchased a new hard drive. I run Vista Business and have both PS cs3 and PSE. Both programs show my grayscales as shades of purple. It also prints as shades of purple. But I have other photo editing software and it shows grays correctly and prints correctly.
Does anyone have any suggestions? It use to work okay before the new hard drive was installed. None of my other software is acting any differently.
Thanks much.

I had (shame on me) purchased PS CS3 from Ebay. Naturally it was pirated and I reported it to all authorities including Adobe. I since have purchased PS CS4 directly from Adobe. I thought the problem would go away, but it hasn't. My monitor is set correctly, my color profiles are correct according to the Lynda.com sessions and Photoshop help files. My video card is a Nvidia GE9500GT and I just updated the driver per CS4 instructions, so I am up to date with that. But my color swatches still appear as shades of purple to the screen.
I drew a custom black/white/50% gray shape. The screen shows the shape as a purple shade and it prints pretty good now. What disconcerning is that the screen shows grays as purples in both my new PS CS4 and now in PS Elements 6.0. (which it never did before) None of my other programs for video or photography show grays as purples, only Photoshop programs. I sent the file to my friend who has PS CS3 and he can see it fine as 50% gray, but I can't. I am totally baffled and bothered by this.
Could it be that something in the pirated software didn't clean out of my system totally? I did the uninstall and then used revo uninstaller to get rid of all remaining registries, but perhaps I need to take PS Elements off and CS4 off and start over again?
Any suggestions would be greatly appreciated. I have contact Adobe support but they don't answer stating that they have to verify my product. ????
Thanks much.

Similar Messages

HT1349 My daughter's IPOD 5 Touch is not taking a charge. It show a picture of lightning bolt and above that it shows a picture of a battery with a very slim red line at end of battery picture. She just got this in August of 2013. What could be the pro

IPOD 5 Touch is not taking a charge. It shows a picture of a lightning bolt and above that a picture of a battery at the end of the battery is a slim red line. This was purchased in August 2013. Could it be battery or ac charger adapter or usb cable?

Those all sound like reasonable causes. I do not know the answer. There is probably an Apple Support forum for the ipod that could help. Also try the ipod Help in itunes.

Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network. when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

How do you get for you music on your iphone to show your "most played""recently played" and all that?

Please I need help. I had it before but I backed it up and it disappeared

That drop down list doesn't show recently visited pages, but shows list list of most visited sites sorted by what the Mozilla devs call frecency (frequency and recency) and is based on bonus points. It is not possible to have much influence on what shows on that list.
If you want a list of recently visited sites then you can use a smart bookmark e.g. on the Bookmarks Toolbar with the location set to this smart folder. 
Name: Recently Visited 
Location: place:queryType=0&sort=4&maxResults=30 
You need to close and restart Firefox to make that folder work as intended.
* https://support.mozilla.org/kb/Smart+Bookmarks+folders
See also:
* http://developer.mozilla.org/en/The_Places_frecency_algorithm
* http://kb.mozillazine.org/places.frecency.numVisits

Why does my macbook pro keep showing me the force quit screen and states that there is not enough memory? The activity monitor shows that there is plenty of memory available.

The message displayed in the Force Quit Applications window says "Your Mac OS X startup disk has no more space available for application memory. The only applications that I have open are Safari and Finder and I am simply reading a discussion board.

It would appear that this error can be caused by an excessive system demand for swap space that exceeds the maximum allocation. Just try restarting the computer.
I found a possible solution for finding the cause of the error. Open Activity Monitor. Be sure you have the Real Memory column showing and the Processes dropdown menu set to All Processes. Select the Real Mem column and sort in descending order. Leave Activity Monitor open. The next time the error appears the application at the top of the column is the one causing the error.

I am trying to print out information on a Google Maps page. I have the print setting on fit to width but the page does not print that way and some of the page that would normally show on page 2 is missing.

The page prints out fine on Internet Explorer, but not on Firefox. 2 pages are supposed to print out but only 1 prints. Also it does not fit to width even though that's the setting.

That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

Is there any way to save my college schedule on the Calendar application in Mountain Lion? I would like for the application to show me the hours I am in class, that way when adding new events it will not conflict with my classes.

I want to be able to see my schedule, but I do not want it to be marked as regular events. Kind of something that just runs in the background without notifications.

Is your Messages application totally quit when this happens. For me, I quit messages and uncheck 'sign out when quit application' (or something like that) in the Message preferences.So when i get a message, it will open the application but it wont take me away from what i am doing, it just appears in the dock.

How can I save the 12-bits gray scale image ?

Software & Hardware
NI-IMAQ Vision 6.0
NI-IMAQ for 1394 2.0.0
Hamamatsu C4742-95
I acqured the 12-bits gray scale image (Format7 , 640X512 size , 12bits) successfully.
And CWIMAQViewer display the correct image of which the range is from 0(black) to 4096(white).
But, I don't find the way to save this image with 12-bits format T.T
Always, CWIMAQVision object save this image to 8-bit format.
I tested all formats - tiff, bmp, aip, png.
I think there are two possible problems.
1. I dont't know the way to save the 12bits gray scale image. :{
2. I dont't know the way to read the 12bits gray scale image that saved correctly.
How can I save and load the 12-bits gray scale image ?
What is the solution for this problem T.T ?

Hello,
I would recommend taking a look at the "ReadImage" Visual Basic project for more information on setting the image type and saving the image to file. When you run the program, make sure you select 16 bit for your image. You can also add another button to this example for saving the image. Within the click subroutine for the button, you can add the line:
CWIMAQVision1.WritePNGFile CWIMAQViewer1.Image, "C://image.png"
This method will save the image in the viewer as a png file. As long as it was loaded as a 16 bit image, it should save all of the 12 bit information into the file. You could then test the new image by loading it using the example (you can see the pixel values by right-clicking on the viewer and selecting Settings>>Show Image Info. The pixel value displayed in the info bar corresponds to the mouse position.
Best Regards,
Jesse D.
Applications Engineering
National Instruments

My print preview constantly shows and prints a 4x6 image even when I'm in everyday printing and, even after I have manually entered 8.5x11 it will still act as if it's in photo mode.

Why can't I get my print program to show anything but a photo 4x6 image (and print that) even when I am in "everyday printing" and even when I manually enter a 8.5x11 paper size?

Changes to Printer Properties settings need to be done through Firefox, not the global printer settings.
[http://kb.mozillazine.org/Problems_printing_web_pages]

Query or Report to show last restart times and patches that were installed?

Hi,
Is there a query available that I can run that will show a the last restart times and patches that were last installed for servers in our environment? I found a couple examples for getting last restart time but not sure how to combine it with patches that
were installed? TIA

Hi,
Could you please post your query on this thread? You could check the query for reference.
SCCM Query: Uptime and Last Reboot Time
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Gradient only showing gray scale

I am trying to create a colored button in IL CS3, and when I open the gradient box, I am only getting a gray scale option- no colors to choose from. If I go to Color Palette, I can apply only a solid color. Back to Gradient, still only gray...arrgh. I am new to Illustrator but this seems too basic. In tutes I am reading, the Gradient opens with a color palette too. How do I get that? thnx!

You can drag a swatch on to the gradient slider to set a color or select one of the sliders, go up to color--set you color space in the pull down menu and enter your values there.

Gray scale photos images are different but should be the same; help?

I send a gray scale image from Lightroom (Edit with ...) and it opened CS4 photoshop.
I made a blank document , 11x14".
I used Windows/arrange/ tile to view the blank and the gray scale image. I tired various methods of bringing the gray scale image to the blank one (move tool, select all and move, copy and paste). Each time, I did this within seconds of each other (I made no changes to fill, opacity, and I used Normal). I brought the image in twice so I could print out the SAME image twice on the larger 11x14 at Sams club in order to use the Epson 7800 printer and not the old wet process on the Fugi machine. One image is darker(lighter) than the other every time. I even tried another image and I got two different exposures.
I wonder if it it only happens with the grayscale images? Perhaps it is a problem coming from Lightroom 2.5?
I did a three image 16x20 and I didn't notice the difference - partly because they were three differenct images in color. I will try two color images from the same file tomorrow.
Any thoughts? I haven't found a possible setting problem that would have been applied between the operations.
Rich

Paulo,
Thanks. I was ready to believe the monitor idea but I still have some reservations.
I don't doubt what you said about the pixels (sounds correct to me).
Why?
I tried another monitor and the images I attached also look like the top one is darker (vertically).
Also, the same is true if I scrolled the images. It seems to me that I should see a difference as I slowly scroll the image vertically. I didn't see a difference.
Read on please.
At any rate (I long for a CRT - my 21" crapped out last year), I am using two SAMSUNG screens, the
one attached to the main computer is the Syncmaster T220 - a well rated
monitor; as far as I knew , read and had friends who recommended them.
The other I just tried is attached to the second computer a couple of feet away. It is the syncMaster T240HD.
So, if it is an LCD monitor problem, it is with both and the same
company. I would think I would have read some bad reports about these
LCDs?
Also, wouldn't the color images also be different when presented the same way? (they aren't).
However, I went back to the original T220 LCD display and moved an image in to a blank one as before, then did the control J to copy the layer, and the images we different again. But, I zoomed in more than usual and scrolled the images and they were lighter at the bottom of the screen and darker at the top of the screen!!!!!!
That is good news and bad news! $$$$$$
If it is the monitor problem, then both images should print as the same.????
Secondly, the display (LCD) attached to the machine at Sams showed the same difference between the two images. AND, I recall that the display is also a Samsung (I will check that tomorrow).
What a bunch of coincidences! I guess I have to search the web for some Samsung answers? and contact the company?
I want to explore as much on my end as possible.
Hunt and another suggested the Control-J to avoid the problem by copying the layer. That didn't work either.
I suppose I could tweak one of the images after bringing them in but I don't know how (I clicked the layer and I wasn't able to do anything - like lighten that image).
Again, thanks for the help. I think the question maybe answered.
I will send the screen capture shortly.
Rich

How to capture the gray scale photo

Hi. I followed this (
https://msdn.microsoft.com/en-us/library/windows/apps/hh202982(v=vs.105).aspx ) example to capture photos and also in gray scale but the sample doesn't capture the gray image, it only pumps the gray pixels to the Image control. How can I freeze these
pixels in the Image control or capture it as a jpg? Thank you in advance.

I should have been more clear. Forgive me. I followed that example and added all the functionality as in the example like the focus(auto and tap), the flash light ect and it works but when it comes to the grayscale: the example only streams the converted
pixels to the image control. It does not "capture" the image. Somehow I have to stop pumping the grayscaled pixels to the Image control and then I want to save-send the "gray" image. What's the easiest way to do that? This is what I have
so far:
MyClient.DownloadStringAsync(new Uri("http://www.iclips.co.za/sign_in.php?username=Clint William Theron&password=k"));
However, the username and password is empty on the server side. How do I add paramters and download the server's response? Thanks in advance
I basically want to turn this:
var values = new List<KeyValuePair<string, string>>
new KeyValuePair<string, string>("username", un),
new KeyValuePair<string, string>("password", pw),
new KeyValuePair<string, string>("friends", friends),
new KeyValuePair<string, string>("density", "high"),
new KeyValuePair<string, string>("platform", "Windows Phone"),
var task = DoPost_Sign_In_To_Server("http://www.iclips.co.za/sign_in.php", values);
async Task DoPost_Sign_In_To_Server(string url, IEnumerable<KeyValuePair<string, string>> values)
try
var httpClient = new HttpClient(new HttpClientHandler());
HttpResponseMessage response = await httpClient.PostAsync(url, new FormUrlEncodedContent(values));
response.EnsureSuccessStatusCode();
var responseString = await response.Content.ReadAsStringAsync();
this.Dispatcher.BeginInvoke(delegate()
if (responseString.Trim().StartsWith("Welcome to iClips. You need to delete"))
MessageBox.Show(responseString);
return;
if (responseString.Trim().StartsWith("Welcome to iClips"))
//this means sign up was succesfull
//so now we signed in
txtDebug.Text = "Sign In Successfull :-)";
vibrator.Start(TimeSpan.FromSeconds(1));
else
MessageBox.Show("Network Error: \n" + responseString);
signForm.Visibility = Visibility.Visible;
signForm_Shadow.Visibility = Visibility.Visible;
catch (Exception ex)
MessageBox.Show("Network Error: \n" + ex.Message.ToString());
signForm.Visibility = Visibility.Visible;
signForm_Shadow.Visibility = Visibility.Visible;
txtDebug.Text = "Try to Sign In >> again.";
in to WebClient, because of the progress bar that can be bind to WebClient.

How to Convert FLIR Gray Scale Image to a Temperature Map in NI VBAI

I have been working with a FLIR A315 Infra-Red camera and NI's VBAI software. I need to determine the presence and continuity of a hot mastic foam that has been injected into the hollow bulb of a rubber weatherstrip seal in 4 adjacent locations that flow together inside the weatherstrip bulb to form a continuous foamed mastic plug.
So far, I have been able to trigger image acquistions in VBAI from a FLIR IR camera by monitoring an Allen-Bradley PLC's status bit. The communication with the FLIR A315 camera is via the IMAQdx GigE driver. However, I haven't figured out how to detemine the temperatures from the gray scale images I receive from the FLIR camera. I wonder if someone could give me some pointers on how to do this.
I have attached some images below to illustrate what I am working with and how far I've gotten.
iPhone_Photo.jpg - shows a photograph of the weatherstrip section that the FLIR IR camera is "looking" at.
FLIR_IR_Monitor.jpg - a screen capture of a FLIR IR monitor utility that shows temperatures measured at a number of points and areas (showing it can be done)
NI_VBAI.jpg - part of my VBAI 2010 project which shows the image I've acquired from the FLIR A315 IR Camera
So, I am part of the way there, but so far have not found a way to map the gray scale image that VBAI is acquiring from the FLIR IR camera into a heat map from which I can determine temperatures - and would appreciate some help on how to do this.
Kind regards,
Nick
Solved!
Go to Solution.
Attachments:
iPhone_Photo.jpg ‏239 KB
FLIR_IR_Monitor.jpg ‏113 KB
NI_VBAI.jpg ‏205 KB

Hello,
Image provided by FLIR camera are unsigned 16bit.
Depending on the FLIR temperature scale you selected (10mK or 100mK), you will have to divide by a 10 or 100 factor to get K values. Don't select radiometric output.
So if your object is cold, the population of the histogram of your image will be on the left part of it and if the object is hot, the population of the histogram will be on the right part.
If you want your temperature values in Celcius, just add 273,15 to the Kelvin Value.
Then you can add a color palette in VBAI (FLIR iron is available)
Hope this helps

How to convert the graph to gray scale

Hi
I am using MS 1.1 version, I need to take the print of the graphs which is provided by NI. The problem here is that i need the GUI to show the graph in multicolor environment, but when i am going to print it on a paper, i should be able to convert into gray scale. Can you kindly suggest me what should be done to achieve this?
Is there any features which present in MS which can help an user to decide this conversion at run time.
Thanks & Regards
Sandy

Hi Sandy,
I hope you are doing well today! What is MS? You should be able to use the invoke nodes of the graph controls to export an image and do some manipulations to it. Can you be more specific as to what you want to do and what kind of programs you are going to use?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

My gray scales show up in shades of purple and print that way

Similar Messages

Maybe you are looking for