My guests does not get internet access through my guest network
I have created a guest network on my time machine. The problem is that my guests don´t get internet access when they choose the network and type the password. I don´t understand why this is happening? My ordinary network is fully functional.
If you are using 7.6.3 firmware on the TC, the guest network does not actually work in bridge mode.. it looks like it does.. but nope, it doesn't.
Make sure the TC is the main router in the network.
Similar Messages
-
I also got trouble getting networking to work on my laptop. It has one Gigabit LAN and one wireless network interface.
I cannot get my Linux guests, I tried CentOS 6.4, Ubuntu 13.10 and Debian 6, to get a DHCP offer from my DHCP server on my physical LAN. Manual configuration using static IP addresses works, but I need DHCP for my laptop.
I tried a Windows 8.1 Pro 64bit guest and the Windows Phone SDK 8.0 and both connected fine to the internet.
Here is what I tried:
With the ethernet cable disconnected I was connected to my wireless network or LAN with WPA2 personal authentication. On this physical LAN there was a DHCP server.
I created an internal Hyper-V switch and then I created a bridge between this switch and my wireless interface. I always used this switch as the single network connection for my VMs.
I am using Windows 8.1 Professional 64bit.
Why are only Linux guests affected and is there a solution? Thank you.Hi faustbusserl,
"I cannot get my Linux guests, I tried CentOS 6.4, Ubuntu 13.10 and Debian 6, to get a DHCP offer from my DHCP server on my physical LAN. Manual configuration using static IP addresses works, but I need DHCP for my laptop."
Does it mean that you have created an external virtual switch for Linux guests and they can not get IP from DHCP ?
Did you try to use legacy network card for the linux VM to get IP from DHCP .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
My macbook air is not getting internet connection through our home wifi. It was working fine yesterday until I took the Air out of the house and used it on another wifi connection. One question is how to delete some of the networks that I don't use. Would too many networks cause the internet connection to fail?
Thanks.Would too many networks cause the internet connection to fail?
It shouldn't but sometimes deleting the list of networks actually does solve the problem you are describing. Have you turned WiFi off and then back on on the computer? -
my wifi is showing connected but i am not getting internet access.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
WRT1900AC does not block internet access in Parental Control
Hi,My router does not block internet access on my other PC. I tryed "Always" tryed specific addresses, tryed IP addresses and everything tech support suggested. I even replaced the router at their advise. Nothing helped. I realize that the problem is not the router but probably my home network configuration, but I can't figure out what is it. To my defence, so couldn't they Does anybody have or had such a problem?Thank you
What Firmware version is currently loaded?Can you post screen shots of how you have the controls configured?Does the User Manual give any configuration help? Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have? Router and Wired Configurations
Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives. -
How to install Adobe Reader on a PC which does not have Internet Access?
Hi
I have a neighbour who does not have Internet access. He wants to be able to open PDF files. He is using 64 bit Windows 7. Is there a link to an EXZE file that I can download?
Thanks
GeoffHi Geoff
Have a look at ftp://ftp.adobe.com/pub/adobe/reader/win/
Regards -
I have a computer which needs Firefox but it does not have internet access. Could I download a full stand alone version of Firefox, copy it to a USB memory stick, and install it from there?
Yes, the Firefox download is complete - no need for a internet connection for installation.
http://www.mozilla.com/en-US/firefox/ -
Why can I not get internet access today?
I was not able to get internet access at home this morning and now I can't get it at the office. G-mail says the mail server is not responding. Also, none of my apps are loading. Verizon, please fix this!
Criggs, we have work to do! We can't have you without service and access to your g-mail account. Do you have wireless or landline service? Which wireless phone do you have?
-
No internet access through MS Hosted Network
Hi, I have been using my Laptop as WiFi Hotspot, but then suddenly we cannot access the internet through phones for some reason. We can connect to the hotspot I have created (shows it is connected), but could never access the internet. I know how to create
a hotspot using cmd: netsh wlan start hostednetwork, like i usually do.. how come we cannot access the internet anymore, but my PC has an access? Please help..Hi MicroFarad001,
"Hi, I have been using my Laptop as WiFi Hotspot, but then suddenly we cannot access the internet through phones for some reason."
Do you mean the WiFi Hotspot worked before (If it didn`t work before ,please refer to the following link to configure it)? Can we surfer the Internet from the Windows 8.1 machine ?Have you tried to connect to the WiFi Hotspot from another phone device to verify
whether the issue is related to the specific phone device ?
Please check the "Allow other network users to connect through this computer's Internet connection" option and ensure it has been confiured for the virtual network adapter .
Here is a link for reference of creating the WiFi Hotspot in Windows 8.1 machine :
How To Turn Your Windows 8.1 Device Into A WiFi Access Point
http://www.7tutorials.com/how-turn-your-windows-81-laptop-wifi-access-point
If the Windows 8.1 machine cannot surfer the Internet. Please take the following steps to have a troubleshoot :
1.Update the network adapter driver or reinstall the driver
2.Run the built-in troubleshoot tool to have a diagnostic :
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Network Adapter
We can also try the following steps to have a check .
1.Turn off the firewall and the antivirus software temporarily to have a check
2.Turn off the "Allow the computer to turn off this device to save power" option for your wifi adapter .(WiFi adapter -> Properties -> Configure -> Power Management -> uncheck "Allow the computer to turn off this device to save power")
3.Try to run “ipconfig /release” then “ipconfig /renew” (both no quotes), check if it can make any difference.
If it is possible ,we can create a new wifi hotspot to have a check .
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]. -
My MacBookPro works fine on both primary and guest networks. HP info shows excellent signal strength. Web page won't open. Tried reducing security level from WPA2personal to WPA. Tried entering TCP/IP addresses manually in HP. I'm told that the HP works with other WiFi routers and can access Internet through other WPA2 setups. I'm out of ideas. Help?
With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal. -
Security Bulletins for a computer not having internet access
Where do I download Adobe Security Bulletins from to install on a computer not having internet access?
You cannot download anything on a computer that does not have Internet Access.
You can view security bulletins on another computer with Internet Access: http://helpx.adobe.com/security.html
If you need to download offline installers: http://get.adobe.com/reader/enterprise/ -
One device has Internet access through MHS291L, the other doesn't.
I have a MacBook Pro which is connected to my MHS291L by Wi-Fi, and it works great. I also have a Windows Vista PC connected using a Wi-Fi adapter, and it does not have Internet access. I got the Wi-Fi adapter about a week ago, and it was working for a while, but it has stopped. The Vista PC shows that it is connected to the Jetpack, in the list of wireless networks, but my browser is informing that I am not connected when I try to visit any website.
I thought it might be because both computers were using the same IP address, so I renewed the IP address on the Mac. No change. I tried disconnecting and reconnecting from the network on the Vista computer, but that didn't help, either.
What might the problem be? Thank you.If your Vista PC is not receiving internet but the MacBook is then that means there is probably an issue with the WiFi adapter on the Vista PC. I would try uninstalling and reinstalling it from the Device Manager. This should refresh the hardware and driver connections and allow you to better communicate with the Jetpack. Make sure you have your wireless password entered correctly and that you have a valid IP address (192.168.1.xxx).
A reset of the Jetpack may also be helpful here incase the Jetpack is suffering from a temporary problem. There should be a reset button somewhere on the device that will restore it back to defaults for you. Any time you perform a reset I suggest taking a moment to setup a custom wireless password. I'd suggest creating your own password according to strong password security best practices that takes at least a few years to crack.
Strong Passwords:
http://windows.microsoft.com/en-us/windows-vista/tips-for-creating-a-strong-password
Rate the strength of your password:
https://howsecureismypassword.net/ -
Unable to receive internet connection over wifi connection. Shows that I am connected to the network, but do not have internet access. Checked my firewall and turned it off. What else am I missing or should be doing differently?
You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
This may or may not correct your problem - call back if it doesn't.
Clinton -
Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012 -
I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?
Welcome to the 'wonderful' world of HTML5 e-learning.
In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up.
Maybe you are looking for
-
Charger dies when external devices connected or keyboard used
My wife ran the battery down on her 1.8G PowerBook, while on travel with Bluetooth & AirPort on. Returning home she connected it as normal to her remote keyboard, internet, printers and external monitor. When attached, the charging indicator would fi
-
I am trying to install on Mac 10.6.7 and it tells me to quit chrome and safari. Safari isn't running. I quit everything, still tells me to quit safari. I reboot, run installer with nothing running, still tells me to quit safari. Please advise, can't
-
I have been using an external HD with my old iMac. I now have a new Mac and it's using the same library but I've been having a few weird issues while syncing iPad etc. Plus it still shows up on Apple TV as "27" iMac Library". Since we have to keep so
-
Alternatives to Compressor 3 ?
I know this has been discussed before, but not in 2008 and after Compressor 3. There is many alternatives to Compressor: BitVice, Digigami, MainConcept, Compression Master on the Mac Wired's or Optibase boards (?) ProCoder 2 from Canopus, Cinemacraft
-
X2200 iLom and Watchdog timer...
I have setup our x2200 and have the iLom working great for most things. I have two specific problems going on with it though.... First, sometimes the iLom just stops responding, I can't SSH, use the WebGUI or anything. I'm using the same mgmt. port f