My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

Similar Messages

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? A

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?

Not sure what plugins you mean, Hornet - Lr doesn't rely on plugins to read new cameras.
If you mean the Adobe Camera Raw (ACR) plugin - that's for Photoshop, not Lightroom. Lr has the same functionality as ACR, but it's hard-coded into the program, so if you're looking for support for a new camera, you need to wait for a new version of Lr.
And nobody here can say when Lr support for a given camera will happen.
Hopefully someone with a Merrill will be able to chime in about whether its files work with the current Lr.

Can't get networking working with RALink 3062 Drivers

So i installed a core install with wireless-tools, but from here i followed the beginners guide to install networking and can't get it working, I even tried and compile the ra2860 drivers for it, said the compile and install worked but still can't get access to the ra0 interface. Need help

Deleted
Last edited by impassive (2011-08-27 15:15:27)

I forgot the password icloud. How can i get it back with my alternate email?

I forgot my apple ID and iCloud password. But i still remember my alternate email (which is a gmail). I have already request the the reset email but i didnt receive anything from apple. I'm worry that the reset email will be sent to primary email (which i forgot).. So is there any chance that i can receive the reset email in my alternate email? Or how can i get my icloud account back with my alternate email???? Pleaseee help me

Hi there Nambin15,
There a a few recovery options for forgotten password that are availabe. I recommnd taking a look at the article below for more infomation on all your options.
If you forgot your Apple ID password
-Griff W.

Can't get ATV working with Onkyo TX-SR605-URGENT ASSISTANCE NEEDED!!

I'm hoping someone will be able to give me some advice, as I've now spent way too much time trying to figure out what's going wrong. I've just purchased the Onkyo receiver, which in itself is an extremely daunting piece of equipment after my very straightforward Rotel stereo amp!
I have only 1 HDMI connection available on my 32" Panasonic LCD TV & have, to date, had my ATV connected to it. With my ATV also connected to my amp (via RCA cable), I've been happily viewing/listening to all my iTunes content this way. I understand from reading elsewhere in this forum that I should be able to maintain my HDMI connection to ATV, connect into the receiver using optical, and by so doing, obtain the same results (if not better, thanks to the optical connection) as was previously the case. So far, I've been unable to do this. The only way I've been able to get any audio happening through the speakers is by reconnecting the RCA cable. The optical cable I purchased by the way is a good quality one so I doubt this is where the problem lies - although I guess it's possible.
The 1st problem I encountered when endeavouring to set the system up was that I was unable to get any onscreen information, as I couldn't find an AV input that responded to the receiver's 'setup instructions'. I assumed this would come via the TV's HDMI AV option, given the ATV is the means of connecting to the TV & that's connected via HDMI, but no joy. However, I did some of the basic setup w/o the onscreen visuals, and proceeded to see if I could access my iTunes content with the connections I referred to earlier. As I said before ... no go w/o the RCA cable connected and even then, no sound through the speakers if I reverted to just watching the TV.
I'm driving myself crazy here, and am now at the point where I can see no value in continuing to read & re-read the Onkyo manual. Although I can accept that it's likely to take me some time to learn how to properly drive this beast and get the most out of it, I don't think (from what I've read elsewhere here) that it should be this hard to get what I'm wanting up and running.
Please HELP and save my sanity!
[Thanks in advance to anyone who comes to the rescue ]

jrmccoy, thank you so much! I have never used an optical connection until now, & so was not aware of the necessity to get the 'snap' happening in order to get a good connection. With some trepidation, I applied the required force to the connection to the ATV - sure enough, it 'snapped' in. I tried to get the receiver connection to snap as well, but had no luck there - it seems to be a very 'sloppy' rather than tight connection that slips out with very little effort. However, after pushing really hard on the cable & getting no better connection, I gave up & tried it as was. The result was that , yipee, I now have it all working as I'd anticipated it should. The only thing I still don't have, is the TV sound coming through the speakers - I thought that with the ATV providing the conduit between the TV & the receiver, I wouldn't need any other connection from the receiver to the TV. I suspect now that that was an incorrect assumption! Thought it was all a bit too easy ... sigh.
Once again Apple Discussions have come to my rescue - I honestly don't know what I'd do without the assistance of all you generous people out there with so much & such wide-ranging knowledge!

Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme

Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn't recognize the printer if it is registered wirelessly to the Airport Extreme. Canon senior tech support and Apple senior tech support don't know how to help. Any advice for someone who was able to get a Canon Pixma Printer to work with their Airport Extreme from a Windows 7 64bit PC also connected to 10.0.1.X subnet? Your advice is greatly appreciated. The printer once online is pingable at 10.0.1.9 and I can see SD cards and browse photo's just can't get the Canon software to wirelessly activate/install.

To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
Hope this helps.

Can't get networkmanager working with openvpn (using static key)

I'm trying to configure networkmanager to open up my VPN connection - using the static/preshared key method - but no dice. (Although I'm able to connect just fine using openvpn from the command line) Anyone been able to get this to work and/or have some suggestions?
I've installed the packages networkmanager, networkmanager-openvpn, and nm-applet. I run nm-applet, and configure the connection, but when I try to launch the connection, it fails. Log file reads as follows:
Oct 28 16:43:56 daroselin NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.openvpn'...
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.openvpn' started (org.freedesktop.NetworkManager.openvpn), PID 19131
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.openvpn' just appeared, activating connections
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state changed: 1
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state changed: 3
Oct 28 16:43:56 daroselin nm-openvpn[19133]: OpenVPN 2.1_rc20 x86_64-unknown-linux-gnu [SSL] [LZO2] [EPOLL] built on Oct 18 2009
Oct 28 16:43:56 daroselin nm-openvpn[19133]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Oct 28 16:43:56 daroselin nm-openvpn[19133]: LZO compression initialized
Oct 28 16:43:56 daroselin kernel: tun0: Disabled Privacy Extensions
Oct 28 16:43:56 daroselin nm-openvpn[19133]: TUN/TAP device tun0 opened
Oct 28 16:43:56 daroselin nm-openvpn[19133]: /sbin/ifconfig tun0 10.1.0.2 pointopoint 10.1.0.1 mtu 1500
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN connection 'DARSYS VPN' (Connect) reply received.
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin failed: 2
Oct 28 16:43:56 daroselin nm-openvpn[19133]: /usr/libexec/nm-openvpn-service-openvpn-helper tun0 1500 1545 10.1.0.2 10.1.0.1 init
Oct 28 16:43:56 daroselin nm-openvpn[19133]: Exiting
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin failed: 1
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state changed: 6
Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state change reason: 0
Oct 28 16:43:56 daroselin NetworkManager: <WARN> connection_state_changed(): Could not process the request because no VPN connection was active.
Oct 28 16:43:56 daroselin NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Suspiciously, it never seems to try to open a connection to the gateway. (Note that the gateway's IP address never appears in the log entries.)
I've configured the connection in nm-applet as follows:
Gateway: <internet IP address of the gateway/server I'm trying to VPN into>
Type: Static Key
Static Key: <the static key file>
Key direction: none
Remote IP address: 10.1.0.1
Local IP address: 10.1.0.2
When I launch openvpn from the command line, the conf file reads as follows:
[darose@daroselin ca]$ cat /etc/openvpn/static-client.conf
# Sample OpenVPN configuration file for
# office using a pre-shared static key.
# '#' or ';' may be used to delimit comments.
# Use a dynamic tun device.
# For Linux 2.2 or non-Linux OSes,
# you may want to use an explicit
# unit number such as "tun1".
# OpenVPN also supports virtual
# ethernet "tap" devices.
dev tun
remote <internet IP address of the gateway/server I'm trying to VPN into>
# 10.1.0.1 is our local VPN endpoint (office).
# 10.1.0.2 is our remote VPN endpoint (home).
ifconfig 10.1.0.2 10.1.0.1
# Our up script will establish routes
# once the VPN is alive.
; up ./office.up
#up ./client.up
route 10.0.0.0 255.255.255.0 10.1.0.1
# Our pre-shared static key
secret static.key
# OpenVPN 2.0 uses UDP port 1194 by default
# (official port assignment by iana.org 11/04).
# OpenVPN 1.x uses UDP port 5000 by default.
# Each OpenVPN tunnel must use
# a different port number.
# lport or rport can be used
# to denote different ports
# for local and remote.
; port 1194
# Downgrade UID and GID to
# "nobody" after initialization
# for extra security.
#user nobody
#group nobody
# If you built OpenVPN with
# LZO compression, uncomment
# out the following line.
comp-lzo
# Send a UDP ping to remote once
# every 15 seconds to keep
# stateful firewall connection
# alive. Uncomment this
# out if you are using a stateful
# firewall.
; ping 15
# Uncomment this section for a more reliable detection when a system
# loses its connection. For example, dial-ups or laptops that
# travel to other locations.
; ping 15
ping 10
; ping-restart 45
ping-restart 120
;keepalive 10 60
ping-timer-rem
persist-tun
persist-key
# Verbosity level.
# 0 -- quiet except for fatal errors.
# 1 -- mostly quiet, but display non-fatal network errors.
# 3 -- medium output, good for normal operation.
# 9 -- verbose, good for troubleshooting
verb 3
#verb 9
Anyone have any idea what the problem might be here?

If anyone's curious, I opened an upstream bug about this:
https://bugzilla.gnome.org/show_bug.cgi?id=606998

Can't get CF working with IIS6 on W2k3 sp2

Hi
I really have no idea how many times I have had no problems
getting CF and
IIS playing nice with each other: dozens and dozens of times.
Prior to
today, the last time I had a problem was back in the latter
days of
CFMX6.0.
Today I am faced with a new Windows 2003 (Enterprise, I
think) server
running the latest patch level of the OS, and a fresh install
of CFMX7.0.2.
Using the inbuilt JRun webserver, CF works fine. Using IIS
for serving
HTML pages works fine (with a caveat, see below). Using IIS
with CF and
browsing *on the server itself*, works fine. As soon as I'm
off the
server's local network: I just get a 401.3 error.
I understand the purported cause of the error. However all
the releavnt
resources I can think of have "full control" set for:
- authenticated users
- everyone
- local system
- the login a/c that IIS is using.
I have set these to cascade down the entire webroot subtree,
as well as the
entire JRun4 dir subtree. This is a gross overkill, I know,
but it's the
point at which I've got to with "troubleshooting" this.
NB the caveat I alluded to above: HTML pages STOP serving
externally if I
install the JRun connector. And start again if I remove it
(with no other
adjustment).
I've googled about the place, wracked my brains, and waved my
fist at the
screen whilst pulling unpleasant and threatening faces at the
monitor.
None of this has worked.
So my question is this: what sort of animal am I supposed to
sacrifice, in
order for this to work? In qhat quantities? Is there any
specific way in
which I effect the sacrifice, or is simply performing the
killing enough?
Are there any rituals or chants I am supposed to engage in
whilst doing all
this? Time of day?
Thanks for any insight or special juju.
Adam

Cheers Ted.
I decided "peacocks" were probably the correct sort of beast
to sacrifice, and decided as long as my feng shui was all aligned
nicely (it is. It *always* is), I probably did not need to any
rituals, provided I recited some Henry Rollins spoken word for good
measure.
And I also tried setting some permissions on the IIS_WPG
user... not the ones you said exactly, but slightly more broad
ones, and it seems to have worked.
We'll never know if it was the peacocks or the permissions,
though. Or the Rollins.
Adam

Can't get GD working with PHP

Hi folks -
I've installed 'gd' which installed its dependencies of libpng, libjpeg and freetype2 with no problems. I've also enabled the module in the php.ini. However, I can't get gd to work (trying to get a photo gallery plugin working in Wordpress) ... according to the phpinfo, PHP was built with the gd option. Also I enabled error logging in the php.ini and I don't see anything in any logs about errors with the gd module.
Any suggestions?
thanks for any help!
Rob K

paddan wrote:
"ldd /usr/lib/php/20060613/gd.so
linux-gate.so.1 => (0xb8064000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb7f81000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0xb7f5b000)
libz.so.1 => /usr/lib/libz.so.1 (0xb7f47000)
libjpeg.so.7 => /usr/lib/libjpeg.so.7 (0xb7f13000)
libc.so.6 => /lib/libc.so.6 (0xb7dca000)
libm.so.6 => /lib/libm.so.6 (0xb7da4000)
/lib/ld-linux.so.2 (0xb8065000)
the libjpeg.so.7 doesnt exist. i only have /usr/lib/libjpeg.so.62 . could this be the problem?
how would it be possible to fix it?
seems to be related tho.
rklingsten: how did you re-install php. so i can try the same. im a debian kind of guy so i end up doing stuff wrong
Well, yours looks different than mine did ... you said the file libjpeg.so.7 doesn't exist, but it seems that ldd is finding it somehow. Mine originally said "libjpeg.so.7 => not found"
After messing with it for awhile, I simply did a pacman -S php and that fixed it which gave me a new PHP gd.so module linked to the updated libjpeg library.

Can't get postfix working with sasl

[root@pentagon postfix]# postconf -n
alias_database = $alias_maps
alias_maps = hash:/etc/postfix/aliases
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = pentagon.atlaikyk.net
myhostname = mail.pentagon.atlaikyk.net
mynetworks_style = host
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = no
relay_domains = *
relayhost = $mydomain
sample_directory = /etc/postfix/sample
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtp_use_tls = yes
smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination,permit
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $mydomain
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem
smtpd_tls_auth_only = no
smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
smtpd.conf
pwcheck_method: saslauthd
saslauthd_path: /var/run/saslauthd/mux
mech_list: plain login
log_level: 7
I'm not sure where to put smtpd.conf so I put everywhere?
/etc/postfix/sasl/smtpd.conf
/etc/postfix/sasl2/smtpd.conf
/usr/lib/sasl2/smtpd.conf
/usr/local/lib/sasl2/smtpd.conf
/etc/sasl2/smtpd.conf
You need to have backups right?
anyway, I still get plain logins:
[root@pentagon /]# telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 mail.pentagon.atlaikyk.net ESMTP Postfix
ehlo localhost
250-mail.pentagon.atlaikyk.net
250-PIPELINING
250-SIZE 10240000
250-VRFY
250-ETRN
250-AUTH PLAIN LOGIN
250-AUTH=PLAIN LOGIN
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 DSN
quit
221 2.0.0 Bye
Connection closed by foreign host.
(certs and keys for ssl was also generated and placed in /etc/postfix/ssl/cacert.pen cakey.pem smtpd.csr smtpd.key )
what am I missing?

Notice the two new lines?
250-AUTH PLAIN LOGIN DIGEST-MD5 CRAM-MD5 GSSAPI
250-AUTH=PLAIN LOGIN DIGEST-MD5 CRAM-MD5 GSSAPI
thats from your link. and thats what mine does not have
Indeed. And right below that in the Note :
If you don't see all the mechanisms as pointed out in this HOWTO it means that you didn't install or compile all the SASL mechanisms. Please make sure that you have at least the following as we are going to need them in the HOWTO: PLAIN LOGIN
And directly below that...
Since we use PLAIN as mechanism we will have to pass our credentials plaintext. But hold, the credentials must be Base64 encoded,...
The way i read all that, SASL only *requires* AUTH PLAIN, but if additional mechanisms are available it may also use them. So it looks to me like SASL is working, as far as it can, given the options it was installed/compiled/configured with.
I'm not trying to be difficult or obtuse, but you haven't said specifically which mechanism you want to use, only that you want SASL to work. And given what I've read it is, but only with PLAIN AUTH. If you need the additional SASL mechanisms, I'd check which the sasl package was built with.
Oh, wait....You're limiting which ones will be used with the "mech_list:" line in smtpd.conf. If you want to use something else, you at least need to add it there.

I can't get Safari work with Java 7 version 20 any suggestions?

I can't get the newest version of Java to work with Safari 6.02. It doesn't recognize it . Works fine with Firefox.

If you have Java 7u13 installed in your system, but it isn't working with Safari, you will want to ensure the plugin is properly enabled.
1. Under "System Preferences...", you will want to open the Java preferences pane (which will open a new window). Under the Security tab of the Java prefences pane, ensure "Enable Java content in the browser" is checked. This will allow Java web content to be used globally (if Java works under Firefox, this is probably already checked).
2. Open Safari's Preferences. Under Security there are four checkboxes grouped under the label "Web content:". One of them is Java. Ensure it is checked.
Be aware that enabling Java in the browser does open you up to any Java vulnerabilities. Best practices are to only enable Java when you need it, and disable it otherwise.

Can't get SMTP working with SSL on Panther Server

mail client is mail.app
mail server on panther server (ie the default one)
all works fine without SSL
if i turn on the SSL option for IMAP in mail.app, it works
but if I turn on the SSL option for SMTP, it doesn't.
Mail.app tells me that "Starting TLS failed on SMTP server"
the server SMTP log tells me "Lost connection after STARTTLS"
Means nothing to me.
What do I do / hit / press / delete / click / copy / edit?
I'm guessing that TLS here is not the Times Literary Supplement, right?
Thanks for help and stuff
G5 1.6GHz

In Server Admin, make sure you set SMTP to 'use' not to 'require'
Otherwise other servers won't be able to send mail to you.
You still need to authenticate with whatever your server requires.
In Outgoing Mail Server 'Server Settings':
Port should be default of 25 unless you decide to setup an alternate port (a very good idea, but save that for later)
Set Authentication to whatever your server requires (same as when not using ssl)
Jeff

Can't get DNSCrypt working with PDNSD

Has anyone got DNSCrypt working with PDNSD? I have been looking for instructions with no luck so far. Would love to hear if anyone has got these working toegether.

Deleted
Last edited by impassive (2011-08-27 15:15:27)

How can you get in touch with some one at apple sick of trying to find out if the wifi on my i pod touch 1st g is brocken or problem with latest software

i have had e mails back over the last question i asked over my wifi problem.
the e mails i recieved had nothing to do with resolving this matter i am banging my head against a brick wall .
still no wiser about why wifi stopped working trying to find some idea why my i pod suddenly stopped working is a joke .
as i stated before will never buy another i pod ever .
this was my pride and joy always looked after it never dropped it or got it wet it just lookes like apple have left it behind
i plugged my grand sons i pod in to my i tunes on my computer and it asked if i wanted to update it to4.1 or something like that, it will not do that with mine
any body got any ideas because my i pod with out wifi isn,t much use to me except as a music player
yours slobber

- What is your wifi problem? Is it this?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Some users have received this after an update. It seems to be hardware relaed.
- Have yu tried making an appointment at the Genius Bar of an Apple store?
- You say yu have a 1G ipod but than discuss iOS 4.1 update. a 1G iPod can nly go to 3.1.3. To identify your iPod:
Identifying iPod models

Fellow users, I bought, through app store, the application "Amplitube Slash" but I can't get it working so here's the problem: I do all the connections but when i lunch the app i can't ear nothing and the input says none. Pls help. Best regards

Dear users,
I bought recently the app "Amplitube Slash" for my iPod touch, through the app store and I paid 8€ for it.
When I tried to play guitar using the application with "Amplitube iRig", I could not listen anything as the input says "none". I would like to know how or if anyone knows how to solve this problem.. You can ask anything if you need more details.
Best regards
Duarte

Here is their support site.
http://www.ikmultimedia.com/c
Here is Apple's support article:
iOS: Troubleshooting applications purchased from the App Storetact-support/

My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Similar Messages

Maybe you are looking for