My hard drive has mysteriously renamed itself
The hard drive item that sits permanently on my desktop has been renamed to 'pe. I noticed this yesterday evening, after I'd downloaded some software updates and tried to back up my files using Time Machine.
An image file that was saved on my desktop has also changed its name, from "Peter and Laura caricature" to "-09§". However, the name of a movie file saved on my desktop has remained the same, so whatever has caused these file names to change hasn't affected everything on my desktop (I only had three items there - the hard drive, the image and the movie).
Is this something I need to be concerned about? Does it signal some sort of corruption or virus? No-one else uses my machine.
I'd be very grateful if anyone out there could help me with this.
Best regards
Daniel
Hello db:
I am not going to turn this into a discussion about AV software. However, it is, IMHO, a complete waste of money and system resources to install AV software on a Mac running OS X. If one uses "reasonable" intelligence about downloads, there is minimal/no risk.
I wonder why a business would permit downloading music..... must be a very different business from ones I managed IT for in my previous life.
Barry
Similar Messages
-
Hi
So I have a few dozen hard drives for archiving and two of them have gone insane, The drives are named B1A and B6A. B1A is mounting and can be accessed however the desktop icon shows up as a faded yellow instead of the regular color and doesnt show in the finder sidebar.
B6A is showing its partition as B1A (this is wrong) and not mounting at all. when repair is run it gives an invalid sibling error.
What can i do, i've never heard about something like this.
These two hard drives were used recently and worked fine could OSX somehow have mixed up HDD partition names on different drives
Also these are mounted via USB, OSX 10.7.5Thank you Jim and Apple2Freak,
I appreciate your comments. I am now suggesting to my friend to buy a legal OS and if that is the case I am suggesting to him to move to OSX instead of OS9. Luckily he let me know there wasn't much data on that drive that he needed to save. I am still trying to determine if I could still use this hard drive with the keylength errors if I erase it or if the hard drive has permanent damage. I am hoping that I could install OSX on it and erase the hard drive to start again.
This imac (slot loading version) can support up to OS 10.3.9 however I might consider Xpostfacto to try to run 10.4. But then I would need to buy 10.3.9 as well as 10.4 and that would double my OS cost. I think I might just look for OS 10.3.9 only. Its not worth it for me to buy two OSes for it.
Jim, your post was very interesting because it also pointed out that it could be an issue of bad RAM. A few months ago we installed some new second-hand RAM and I wonder if that is the cause of all these problems. I will have to check that first.
Thanks again! -
Hard drive is mysteriously filling up
My expansion hard drive is mysteriously filling up. It has 465GB of capacity. I am told I only have 85 GB left. When I open the Get Info for every top line file in the directory, I am told I have only used less than 100 GB.. I cannot find what is taking up the other space. If you have any thoughts on how to check or why this is happening, please let me know.
Thank you,
LarryHi Larry
Try OmniDiskSweeper. It will give you a more accurate and thorough picture of your hard drive.
Matt -
My iMac G5's Hard Drive Has Most Likely Failed
So my hard drive has been having problems since November 2005, but the computer has been barely holding out, until now. The computers just dead. I got this message from
It happened at the most random time. Yesterday morning, I turned on my computer and opened Safari. Everything went just fine, and about 3/4 way through loading the apple startpage, the entire computer froze up.
I tried disk utility but it froze while verifying and repairing disk permissions (about 1/8 started and it froze) and when I did verify disk, it came up with a popup window stating:
Error: The underlying task reported failure on exit
And then in the Disk Utility information window where it says the status that its at (Checking....) it said this:
Checking HFS Plus Volume
Checking Extents Overflow File
Checking Catalog File
Invalid Sibling Link
Volume Check Failed
The underlying task reported failure on exit.
1 HFS volume checked
1 volume could not be repaired because of an error
Then I ran fsck in single-user mode, and i got this:
#fsck -fy
disk0s3: I/O timeout
(4, 7808)
I'm not sure what the coordinates mean. I'm thinking they might be the coordinates to a bad sector that may be screwing EVERYTHING up because the computer failed to recognize the bad sector, and close it off of any further use.
After that I ran diskutility in single-user mode thinking maybe the GUI version was corrupted... but I let the diskutil verifyPermissions /dev/disk0s3 run for an hour and nothing showed up on the screen so i just decided to stop, shut down, and go to bed.
So now i've figured, my iMac has given me enough trouble as it is. ive had so many problems with it... ever since november 2005 (5 months into owning it) it has had the following hard drive error code show up in extended test for the Apple Hardware Test ever since... and about 1 hour ago, i retested it, and sure enough this came up:
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus O-Master
**ERROR*CODE***ERROR*CODE**
I'm really not happy with mac right now. I think their 1 year warranty is useless and they pretty much leave you screwed if you dont buy their applecare protection plan.
I have a windows 98 (upgraded from 95) that i bought way back in 1997, and its still functional... with the same hard drive... same everything... and it works just fine... except for the memory is small because back then 128 GB was the biggest it got) :P
so a 5 GB hard drive going on its 10th working years, and this 150 GB hard drive failed after 14 months... all i've gotta say is: Apple, thats pretty pathetic... especially after you mock PC in their commercials for "breaking down". Ive actually had less problems with all of my 3 PCs combined then I've had with this **** iMac.
So now heres what i'm trying to figure out. i'm wondering, what kind of hard drive i shuold buy to replace it... i tried the DIY hardware replacement ordering page but it says that the apple website couldnt find it (http://www.apple.com/support/imac/g5/diy/).
I wasnt planning on buying from the apple DIY anyway, but I wanted to see if it would specify a type of hard drive. Where is the popular website to go to buy these things, and how expensive will it be for me to replace it with a hard drive about as big as my current one).
Or should I not throw my hard drive away yet, and invest hope in it somehow. I heard DiskWarrior could do the trick, but I dont want to have to spend $80 on a piece of software that might not even work out right. And all the free ones you have to download to your mac... but too bad for me, my mac wont even start up... (well it does but when it gets to the desktop, its pretty much unfunctional... just a moving mouse that wont do anything).
Is there some renouned website (as crucial.com is for memory) among these forums that you might suggest?
I'm open and desperate for any input i can get. The sooner the better
Thanks in advance
-MarkHey look, its my friend Charlie from my Disk Permissions Error -36 post.
Here's our thread from last time. Alot of the stuff there still pertains: http://discussions.apple.com/thread.jspa?threadID=620422&tstart=0
It turns out the reformat I did only worked for a little while. Then last friday, my kernel was corrupted, and so i did "Erase All" but skipped the "Zero All Data" figuring that it wouldnt be necessary since I wasnt discarding my drive, so there wasnt anything to secure from anyone recovering private data. It worked for 4 days after that, and now I'm here again. With problems.
Do you remember getting disk I/O errors on disk0s3?
If you remember way back then, I had gotten this error when I did diskutil list in Terminal:
Aug 30 21:42:08 mark-imac-g5 kernel[0]: disk0s3: I/O error.
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *149.1 GB disk0
1: Applepartitionmap 31.5 KB disk0s1
2: Apple_HFS Macintosh HD 148.9 GB disk0s3
I'm running DiskWarrior right now (borrowed it from a friend... didnt feel up to paying the $80 & have it potentially not work) and its stuck at this message:
Rebuilding Directory Data
[ |||||||||||Solid Progress Bar||||||||||| ]
Step 5: Locating Directory Data
[\\\\\\\Barbershop-like Progress Bar\\\\\\\]
Speed inhibited by disk malfunction (Skip) (Cancel)
Its been stuck there for about an hour, and I'm assuming its not going to work as you suggested it wouldn't
It's too late to do any good now, but if you ever run the
hardware test and get an error code, you should have Apple
look at it. If you were getting that error code 5 months
after the computer was new, a replacement drive would have
been covered under your warranty.
I wish I had actually done so. I was a mac-noob back then so I had no idea what anything was, and I was still getting used to the actual working-with-a-mac thing (ive been a Windows user for most of my life except for working/helping teachers with their macs at school... i was always the computer-person in school... it was pretty awesome :P)
I have to disagree with the other posters. I don't think >DiskWarrior is going to help you. Data Rescue II might help >you to get some files off your hard drive if you have files >on there that aren't backed up. But my experience was that >when I got the error in the hardware test, DiskWarrior >didn't work.
Right now I have everything backed up that I need, so it's not like i'm using DiskWarrior to get my data back. I just want a program to be able to tell the hard drive that these certain sectors that are acting up and causing the hard drive to fail are ruined and to not use them anymore. If its not just 1 sector, but the entire hard drive that is failed, I'm not even gonna bother salvaging it (even though i'm sure if it was completely failed there would be no way of getting it back that deep into failure).
I read at this website about someone else who had a similar problem to mine (http://www.desktoppublishingforum.com/bb/archive/index.php/t-901.htmldiskwarrior+speed+inhibited+by+diskmalfunction&hl=en&gl=us&ct=clnk&cd=2):
ElyseC - 07-14-2005, 11:52 PM
And now the latest reply from Marc the support tech:
There have been a handful who have seen success after four
or five days with the "speed inhibited by disk
malfunction" message. There have also been a few
up to a week. From there, admittedly, the state
of the drive has to be pretty damaged for DiskWarrior to
run so long, although the speed DiskWarrior can work is
also related to the speed of the processor, so four days
for a G3 is different than four days for a G5.
She later posted this:
,..for a variety of reasons I ended up letting DW chug away on my drive for a few days shy of an entire month.
*UPDATE MID WRITING THE POST*
Disk warrior finally unfroze! It's now Comparing Directories (recording any file or folder differences).
I'll post more when it's all done
Or if i have trouble mid-way -
I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog? Will the new (Master catalog) have the correct link to the source file? If not, how or can this be done?
I have tried to explain my situation as clearly as I can. Do you understand my situation?
This maybe something you don’t have time to help me with. If not can you suggest somewhere I can get an answer? I really need help. PLEEEZZZ HELP ME.
Bruce Schuerman
Norman, OK
405_514-4875 (call collect)
[email protected]I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog? Will the new (Master catalog) have the correct link to the source file? If not, how or can this be done?
I have tried to explain my situation as clearly as I can. Do you understand my situation?
This maybe something you don’t have time to help me with. If not can you suggest somewhere I can get an answer? I really need help. PLEEEZZZ HELP ME.
Bruce Schuerman
Norman, OK
405_514-4875 (call collect)
[email protected] -
I imported different trips to different catalogs on different external hard drives. Later renamed external HDs. I want to combine catalogs and have my source (NEF) files all together on one drive. I’m not really sure how to get those source files back and get rid of the extra long path to where the source files are now located. If I re-link files to their current catalog (many different paths to files in same catalog) can I merge (import catalogs) into one master catalog? Will the new (Master catalog) have the correct link to the source file? If not, how or can this be done?
I have tried to explain my situation as clearly as I can. Do you understand my situation?
This maybe something you don’t have time to help me with. If not can you suggest somewhere I can get an answer? I really need help. PLEEEZZZ HELP ME.
Bruce Schuerman
Norman, OK
405_514-4875 (call collect)
[email protected]Is there any solution (other than buying
I really think 'buying' is the best solution on this one. Ideally, you would have at least five internal hard drives.
System
Projects
Cache/Scratch
Media
Exports
Use externals and network drive only for backup. -
My computers hard drive has stoped working, how can I retrieve my Itunes library from my computer?
My computers hard drive has stoped working. How can I retrieve my itunes library? My back ups were on this hard drive as well.
When I brought my computer to be fixed they said they would retrieve photos and music and documents but loose my programs. That being said I am not sure if I will recover my music from itunes because it may fall under the program category. I support itunes by purchasing from itunes, but now i am in a position where i may loose years of purchassing music and it has me feeling a little bit sick to be honest...the stress this is causing is really big. DÙoes anyone have any experience with this type of problem?
Help is appreciated, thank you.If the data is recoverable from the drive then they should have recovered the entire iTunes folder which includes the library database. Restore this into the <User's Music> folder of a replacement system, install iTunes, and it should be as before.
See also Recover your iTunes library from your iPod or iOS device. Even if you don't have one there should be some useful links...
tt2 -
My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.
2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that. -
One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?
Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
My external hard drive has disappeared
My external hard drive has disappeared from the 'open file' window in photoshop CS6. It's working fine and appears in other applications such as bridge and lightroom. How do I get it back? I'm running a Mac on OS X.
You may have accidentally dragged the drive out of the Devices list in the sidebar.
In a Finder window with visible sidebar, do Shift+Cmd+G to get the Go To Folder dialog. Enter
/volumes
then click OK.
You'll see all your mounted volumes in the Finder window. Drag the required one to the Devices list in the sidebar. -
External hard drive has crashed how do i recover my purchases previous library ?
external hard drive has crashed how do i recover my purchases previous library ?
http://www.youtube.com/watch?v=Nc4S2l9neKM
-
After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal to fix the problem, downloaded BatChmod but nothing works… Any other suggestions? I have an Imac running OS10.6.8.
There is suddenly a lock icon on my external backup drive!
Custom Permissions -
Hi,I have recently replaced by hard drive with a ssd. My old hard drive has all my iTunes stuff.i would like to install only iTunes programme on the ssd with all the content on the old hard drive. How do I do it?
Install iTunes.
Once install, hold SHIFT and launch iTunes.
When prompted, point iTunes to the correct location for the iTunesLibrary.itl file which should be in the iTunes folder under <user>/Music on the old drive. -
My old hard-drive has corrupted and i have lost my library. i lost my back up too. I have restored all my purchased stuff but had 5000 songs uploaded from my CD collection. Is there anyway of transferring the CD tracks from my ipod or ipod to my iMac? Or do I have to manually upload the CDs again?
Hi,
See if this doc helps https://discussions.apple.com/docs/DOC-3991
Jim -
27 inch imac's hard drive has failed.
Hi guys my 27 inch imac's hard drive has failed and I need to replace it. it was a seagate 1tb ST31000528AS. Any suggestions what to replace it with.
No worries,
Any SSD should work I recommend either OWC or Crucial SSDs, but you will still need an aftermarket optical drive temp sensor or the software to slow the fans down.
I recommend:
For software: http://exirion.net/ssdfanctrl/
Temperature sensor:http://www.ebay.com/itm/Apple-iMac-21-5-A1311-Mid-2010-Optical-Drive-Temp-Sensor -Cable-922-9624-/151521177860?
You will also need a bracket to mount it on-http://eshop.macsales.com/item/Newer+Technology/ADPTADRV/
iFixit guide: https://www.ifixit.com/Guide/iMac+Intel+27-Inch+EMC+2309+and+2374+Hard+Drive+Rep lacement/1634
You will just need to swap out the HDD bracket with the above one mentioned.
Good Luck
PS: If you are interested in installing it in the 3rd SATA slot or replace the optical drive with an SSD please say so
Maybe you are looking for
-
Has anybody solved this problem? I can only print a 4x5 instead of a full page. HP says it's an adobe problem not theirs. I tried adding fax in front of the printer's name as someone suggested but it only wanted to send a fax. So that didn't work. Pl
-
HELP!!!! Burning photos to a CD-RW
I'm trying to burn 2 photos from iPhoto to a CD to be used in the making of a Christmas gift. I followed the Export method as it will require viewing by a photo processing company. However, after following instruction and dragging my two photos from
-
Language Pack installation error
Getting an error while trying to install ServerLanguagePack_SP2_es-es.exe: " La configuracion de Language Pack for SharePoint, Proejct Server and Office Web Apps 2010 - Spanish/Espanol no ha finalizado correctament. Error 1706. Setup cannot find the
-
Post Author: matty1stop CA Forum: Administration Is there a way to view/delete the current connections that exist in the universe when logged in as the administrator?
-
Making single instance DB/ RAC Database with 2 instances
i created single instance DB , now i want to make it RAC DB with 2 instances. Need guidelines/Notes to do so.