My Hard Drive is not mounted on my desktop

Hey guys,
For anyone who knows. I recently had my hard drive formatted and it is not mounted on my desktop. Its in the finder but someone not showing up on my desktop. Anyone know how I can correct this?

Hi ScaradL,
Have a look in Finder/preferences/general, and make sure there is a tick next to "Hard Drives". If there is, deselecting (ie "unticking") and then ticking it again.
Cheers
Rod

Similar Messages

My external hard drive will not mount on the desktop?

My external hard drive no longer mounts on my desktop, the hard drive has been checked & is working-has anyone ideas?

Hello cuckoo55,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Mac OS X v10.6: How to show your hard drive icon on the desktop
http://support.apple.com/kb/HT3746
In the Finder, choose Preferences from the Finder menu.
Click the General icon on the toolbar.
Select "Hard disks" in the "Show these items on the desktop:" section.
Close the Finder Preferences window.
Best of luck,
Mario

External Hard drive will not mount on desktop

I have a 17" Powerbook G4 that has replaced a broken iBook G4. I've been using a Western Digital MyBook Pro Edition as a secondary drive for my multimedia as well as my iTunes Library. It worked fine on the old iBook.
When I plug it into the Powerbook, using either USB2 or Firewire 800, it will not mount to the desktop. It DOES however appear in the System Profiler as "External HD Button and Lights". The drive is formatted for FAT32 and works fine on my Windows XP desktop machine, so I know the drive functions mechanically. A different hard drive, a Maxtor mounts to the desktop fine using USB2, so it isn't a bus issue.
This is driving me nuts. I LOVE this computer, but I have WAY more invested in music than the cost of the computer.
Thanks in advance.
Message was edited by: hempomatic

It took a while to figure it out but apparently there was a conflict with bluetooth. I disabled it and all is well.

External Hard Drive does not mount

My 2TB external hard drive does not mount and I cannot get it to. Have tried turning the hard drive off and then back on. No response. Any thoughts as to how I can get it to be recognized?

You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

External Hard Drive will not mount after upgrading to Yosemite

After upgrading to Yosemite, my external 3TB hard drive will not mount... can't see in Finder, but does appear in Disk Utility. Follow steps to Repair disk, but get a message that D.U. cannot repair disk.

See mount section.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

I just purchased a new iMac and my Hard Drive is not showing on my desktop.

I just purchased a new iMac and my Hard Drive is not showing on my desktop. It doesn't show up on a finder window either.

No. It's what I've named my boot drive.
New Finder windows can be set to open any selected volume or folder of your choice.

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

External Hard Drive will not mount

My external hard drive that I been storing all my aperture files on is not mounting to the desktop. I can see the hard drive when I use my disk utility, but it doesn’t show up in the desktop.
When I purchased the hard drive originally I didn’t format to apple but it worked fine.
Please help…
Jethro Acosta
Infocus Studio
Imac with intel chip Mac OS X (10.4.4)

Make sure the drive is powered from from its separate power source, not solely through the FW or USB connection.
If it is a dual connectivity drive, try connecting from the second method (e.g. if you are using the much preferable FW, try switching to the much-less-good USB).
Repair Permissions, even though that is fairly unlikely to have any impact.

Hard drive will not mount after optical drive upgrade

I recently performed an optical drive install. Had to remove the hard drive bays (I use three hard drives - Luckily, 2 run OSX).
I carefully removed all three drive bays and the empty bay. When I inserted the drives into the computer I had changed the position, swapping one OSX drive with a different one and reversing the drive bays. On restart, the computer started on the drive I had not selected for startup and I received an error message stating the other drive could not mount and it gave three options (Initialize - Ignore and Eject).
I can see the drive in Disk Utility and repair the permissions (it's also located in the System Profile).
I tried a few things I read in the community using various Terminal commands but was unsuccessful.
(Let me point out that I recently switched from a PPC G5 to MacPro and swapped the drives from PPC into MacPro and all has been fine until I removed changed their positions in the bays)
Any suggestions/help would be greatly appreciated.

I would recommend you reformat your drives that you brought over, and if possible put in a Firewie case.
Swapping drives will normally not matter but you should use Startup Disk to reset the default after using Option key the first time.
Putting in an optical device shouldn't require removing the drives to get the cage loose and let you put in a 2nd superdirve.
G5 used APM partition map, Intel Macs use EFI and requie GPT/GUID.
A drive with just data should not matter but that is not fool-proof either.
A drive iwth the system from a G5 though can.
During startup the boot process scans all volumes and looks for systems and mountable volumes.
Pull all the drives except the one with OS X that you were using, and put that in bay #1.
I've moved arrays between bays and that never "broke" the array or had trouble mounting and using (even moving to ODD ports).

Internal hard drive does not mount in disk utility

My internal hard drive no longer mounts in Disk Utility. It is grayed out. I have extraordinarily frequent spinning beach ball/freezes, in Safari or Apple Mail. The most recent symptom: upon rebooting or just starting up, I see flashing black on the display. This has been occuring for more than six months. Of course, I have made total and frequent backup's. I bought new RAM, but have not yet installed it, and I susect this might help. I have done repeted troubleshooting many times each: Apple's Disk Doctor, Repaired Permissions, Reinstalled the Mac OS, safe boot, Alsoft's Disk Warrior, Apple's longer Harware Test, etc. I have worked as a new user, too. All tests done report that all is well. What od you thnk the problem is? Must I drive 1.5 hrs. each way to the Genius Bar at my nearest Apple Store? Might I try to erase the hard drive as a fix? I hate to do this, only as a last resort, as it is so time-consuming. Should I just update my Mac OS? Please advise, out there, if anyone can offer any advice, I would be greatly appreciative.

The list of issues you posted probably would not get shorter if you attempt to 'upgrade them' away, as usually that kind of effort is not effective yet may expose more of the same problems while not necessarily revealing the original weakness. Another OS X installed over a set of problems seldom helps.
How full is the hard disk drive? If it is too full, or has been very busy in use several years, it may be time to replace the HDD and perhaps put a larger capacity one in the computer. And if the main computer hardware checks out OK (tested under a variety of duration and stress tests) then also consider a RAM upgrade if the device is not already at the maximum capacity.
When was the last time the hard disk drive was devoid of content, maybe wiped -- erased and reformatted by a third party disk utility or have a utility overwrite the entire HDD with zeros? This used to be a common tech service in the course of a major effort to restore a Mac. Or Defragment?
If you can do the latter, this could help resolve bad sectors and remove old data or corruption on the hard drive. Or get a new HDD and before committing a new OS X install & apps to it (or a re-clone of a complete backup) test the drive and be sure it is ready for use. Not all new drives are perfectly ready; some need to get exercise first.
I'd bet on a new hard disk drive of larger capacity (also note spin RPM rate and data speeds) and a full RAM upgrade.
If you have a backup clone on an external hard disk drive (in a boot-capable enclosure) you could really go to town and before you erase the main/only hard drive, make a backup clone and test its ability to boot the Mac. Or put the old drive and content in a suitable boot capable enclosure of the kind with its own power supply, and deal with it later.
Then consider a later version OS X -- whatever most recent version that model can support... {edited}
Good luck & happy computing!

USB2 Hard Drives will not mount under 10.4.11

I have a 2.33 GHz Intel Core 2 Duo MBP, with 2 GB of RAM. Using the 10.4.9 OS and earlier, I had no problems at all mounting and using an external USB hard drive that I use at both work and home. When I updated to 10.4.10, the drive stopped mounting, so I took it and the computer in to the Genius Bar. The only solution he could think of was to roll my OS back to 10.4.9, which worked immediately. The drive started booting again without any problems.
I took my MBP in for an unrelated issue and the Genius at the Genius Bar (same guy who rolled it back, I think) suggested I upgrade and that the USB mounting issue wasn't a problem any more. I upgraded to 10.4.11 and once again, my USB hard drive won't mount.
I have no problems getting it to mount on my XP machine at work and our G4 Mac Mini at home has no trouble with the hard drive either, so I'm positive the drive is fine. The problem is with the OS update to 10.4.11.
My iPod mounts just fine (which is also USB2) and my thumb drives seem to work just fine, but I do have an older drive that has stopped working. Like my external HD, it mounts just fine on other computers.
Does anyone have a fix? The Genius I spoke with when this problem first started suggested I ditch the drive and get a Firewire one, which is a nice thought, but I shouldn't have to replace hardware that works just fine, because something in the OS updates isn't working. Do I have to roll back to 10.4.9 again?
I have to say, this is a bit frustrating, as I already dealt with the problem, was assured it was fixed, and then ran into it again.
Robb

I recently had a similar issue (different conditions, same issue) and here is what I posted, maybe it can help you:
http://discussions.apple.com/thread.jspa?threadID=1638087&tstart=0
I didn't mention another possible solution mentioned somewhere else: replace certain kernel extensions in your 10.4.10 or 11 installation with those present in 10.4.9: "IOHIDFamily.kext", "IOUSBFamily.kext" and "IOUSBMassStorageClass.kext" (using Pacifist).
An update to this post: now my external disk doesn't mount again. I'm pretty sure the disk is OK, as it mounts in different machines and it works fine thru the USB 1 interface (keyboard hub).
I tried the solution's point two (deleting kext caches) and it worked pretty fine... Until the next restart. Doesn't work anymore. USB Prober (point three) no go. I think I'll try replacing the kernel extensions. It was reported as successful, but I'm currently running 10.5.4 and I don't feel inclined to use 10.5.3. I would use better 10.4.9 ones, which were mostly reported as OK, but doesn't seem a pretty safe operation.
Anyway, my external HD was working fine under 10.5.4 in a different machine and doesn't work in this new one (also 10.5.4), so I'm not sure about the results, but I won't trash this external HD, as it works fine in every other machine except for this one
Already many posts regarding USB issues, I hope Apple fixes this ASAP, as most of peripherals today are purely USB-based. I think this issue regards usually to external HDs. Surely some simple lines of code mangled across the various OS updates

Hard Drive will not Mount

I have a Seagate Barracuda 1.5 Gig installed in a MacPro as an additional drive and as of today the drive will not mount. Yersterday I noticed it ejected itself; I immediately rebooted and started to download the data to another drive but it ejected itself again after about 25% complete copy. I attempted to "verify drive" with Disk Utility but it was not listed. This morning it will will not mount. The drive is still under warranty so replacement is not an issue. Where I am at a loss is recovering the data. I fired up time machine and there was no data from this drive backed up (Bay 2). I checked the preferrences and the drive was not "excluded". So, I'm at a loss as to how or if I can recovery any data. I removed the drive from the MacPro and fired it up in a docking station (SATA) without results; still will not mount. Is recovering my data beyond hope? Any ideas or tips would be appreciated.
Thanks,
Koyangie

Hatter,
Tried Recovery Mode without success. Although the drive appears in Disk Utility I get an error after selecting Restore! If I click on the Image icon it will not list the contents.
There is perhaps .6 TB on this driver (images). After I posted and received yourt reply I took another look at my Time Machine and found all my data under Shared. What a relief.
Thanks for your advice. I'll return the drive to Seagate for a replacement. Hopefull I will be able to format it before sending it back.
Koyangie

Hard drive will not mount - SMART STATUS "not supported"

I was in the process of "sanitizing" an iMac G5 last night by erasing the data with Disk Utility and the hard drive is not not recognized...and some alarming noises periodically come from the drive.
Is there something else I should try to determine if the drive can be saved? (never had trouble before.)
Failing that, how do I determine which drive I should order as a replacement (250 gig,) and from where?
Thanks!

If you are hearing noises from the HD, then I suggest that oyou start backing up.
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
If you have the iSight model, you will need to take your computer to your nearest AASP. The iSight models (except for RAM installation) are not user repairable & will void the warranty if attempted.

Hard drive (internal) not showing up on desktop

One of my internal hard drives is not showing up on the desktop. (Soft freeze after waking from sleep mode. I pushed the reset button on the front of the tower. Haven't seen anything on that hard drive since. I haven't been able to access it since.)
Hard drive shows up in disk utility but I can't mount it. Looks something like this:
74.5 GB WDC WD800JB-00CRA1
There is nothing below that. (Normally indented below is the name ie. Macintosh HD)
I cannot verify or repair disk or disk permissions. I cannot mount it. All these options are grayed out. I took it to the Apple store genius bar. They think the disk is fine but "the partition is lost." (I didn't partition the hard drive. Don't really understand what that means.) I've tried Data Rescue (369 hours remaining) nothing is being recovered.
I've tried Disk Warrior. In the "Hardware" option I can choose the disk and run a test. It says it is fine. ("This hard drive's built-in S.M.A.R.T. diagnostics indicate the drive is functioning normally. Test complete") In the "Directory" option the disk doesn't show up. So I can't rebuild the directory.
What else can I do?
G4 Mac OS X (10.3.9)

The Apple System Profiler shows all the correct info except the name is "unknown." The only 2 places that seem wrong are the desktop - no hard drive, and in Disk Utility. I don't know what it's called, but the line directly under the listed hard drive in Disk Utility (74.5 GB WDC WD800JB-00CRA1) should have the name of the hard drive (Macintosh HD) listed but it does not. It should look like this but with an icon of a hard drive in front of each line:
74.5 GB WDC WD800JB-00CRA1
Macintosh HD
The second line (Macintosh HD) is not there. The other hard drives have their names listed. Apple seems to think this is a problem but other than running Data Rescue and Disk Warrior (neither of which did anything) they have not given me any other suggestions.
The computer knows the hard drive is there but it won't let me access it. I have done, tried, and checked all the easy stuff. (Cables, any and every type of connection, restarting holding down option + apple + F + O and all the other restart variations with and without the OSX CD, and running "rescue" programs.) Nothing has worked. Short of an exorcism, I'm out of ideas.

Hard drive does not appear on the Desktop

Hard drive does not appear on desktop. Can only be found in the applications folder.

Go to Finder -> Preferences, click the General icon, make sure the appropriate box is checked.

My Hard Drive is not mounted on my desktop

Similar Messages

Maybe you are looking for