My hard drive on my Macbook Pro died and I need to get CS6 back. How?
.
Hi Kerduka,
You have the Photoshop & Lightroom photography bundle?
Does the process described here work for you?
http://helpx.adobe.com/creative-cloud/help/install-cc-and-cs6-apps.html
-Dave
Similar Messages
-
my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please
If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard. -
I had to replace the corrupted hard drive in my macbook pro recently, and after I did so I did a full factory software & application restore. I had to rebuild my iTunes Library by dragging my music folders in my iTunes Media into the iTunes Application and rebuild my playlists manually. After plugging my iPhone 5 into the computer USB, it immediately recognized my iPhone 5, showing: last backups, space left on my iPhone & all options available. I then checked the box to manually manage music etc. The problem I am now having is that when I actually try to drag music from my iTunes to my phone a prompt comes up saying that my iPhone is not an authorized device. What should I do? Any and all advice would be greatly appreciated!!
jrmetzger,
iOS runs on iPads and iPhones; OS X runs on Macs.
Given your situation, I’d highly recommended that you purchase a SATA-to-USB adapter, so that you can test both your old disk and your new disk externally, since it might be that the problem is due to a faulty internal SATA cable rather than due to faulty disks. -
i just changed the hard drive on my macbook pro 13" and it won't turn on. I need to put the latest operating system on it. It had OS8 on it
dtrewitt wrote:
It had OS8 on it
Ummmm no it didn't. iOS only runs on iPhones, iPads and iPods. -
hello
I have to reinstall photoshop CS6 on my macbook pro after having the hard drive replaced.
download button is taking to a message ERROR 413
it was purchased on 2013 I installed only in this computer once.
any ideas what should I do?Try downloading from this link: Download CS6 products
-
i am having problem copying any files or folders from any external device or moving between folders within the macbook. its too slow and takes a load of time. as you can see above picture it makes all clear.
its not even old i just bought it on november 2012. it worked fine 2-3 weeks but now it not good. even apps take more time to open. it is getting too slow so soon. anyone with solutions ? please help me.What kind of external device is it? USB 2 is the slowest port on the Mac, Firewire 800 and eSATA and Gigabit Ethernet are much faster, USB 3 and Thunderbolt are extremely fast.
Also, if the hard drive is almost full things can slow down. -
HOw can I export photos from my iPad or iPod to my main computer? My old computer died with my photos on it but I want to move my photo library from my iPad or iPod to the computer I just bought. Thanks for any help you can give.
Sorry but your iPhoto library is not on an iPad or iPod - you may have photos there (most likely low resolution copies) but not an iPhoto library - dying computers (along with software and human errors) are why you always must have a backup - now is the time to load it
LN -
can this device be used as an external hard drive with a macbook pro laptop and use files on the airport time capsule?
If you mean an AirPort base station other than the Time Capsule, it doesn't have internal storage.
If you mean a Time Capsule, its internal drive can be used for regular file storage but shouldn't be; as with all drives, it'll eventually fail. You're better off using a standalone drive and setting Time Machine to back it up as well.
(112309) -
Move hard drive to another macbook pro
can you just move a hard drive to another macbook pro.
As Shootist states - No and Yes.
I just actually did that the other day. My newer MacBook died on me. So I took that drive out and installed in my older 2009 Macbook Pro and it works.
I however, can't tell you if moving your older Macbook Pro hard drive to your newer Macbook Pro might work. If the OS is the same version, it might. But if the OS in your older Macbook is not the same version, it might not.
Good luck -
What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.
No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2? -
Hello. I have installed a new hard drive on my Macbook Pro with OSX Tiger. I tried to reinstall Logic 8 Pro but it refuses the serial number when I try to install it. I took the serial number from the "About" box when Logic was still installed but no good. The software was originally an upgrade, and I don't think I have the disks for the previous version. What do I do? This is important because I only use the computer for music. Thank you.
There's actually an even simpler solution that doesn't include buying a new version of Logic. He can use his original version easily. Of course, that depends if the OP knows how to effectively use his computer though...
-
Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.
there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store
-
I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah -
I have just changed my internal Hard drive on my MacBook pro. I had recently downloaded some movies on iTunes which I want to put into my iTunes library on my new internal hard drive. I have put my old internal hard drive into an external capsule but when I open the icon of the hard drive from the desktop I can't find my movies.
At the moment I have the new movies downloading again from the cloud but it is literally taking hours for even one movie to load.
When I changed the internal hard drive I restored my info from my old external hard drive which hadn't been backed up in a month and hence does not have my latest movies...
I am concerned that I might go over my internet usage limit (flatmate is refusing to change to unlimited package!!!!) by downloading all the movies again from the cloud never mind how long it is taking...
Is there any way to restore all my info and media from the old internal Hard drive in the capsule as well as from the external hard drive?It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
How can I move my project from external hard drive to my macbook pro?
How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance
Try here...
Setting-up a new Mac from an old one, its backups, or a PC
Maybe you are looking for
-
I was attached by registry doctor and several conduit malware programs. I had the malware removed from my computer. But ever since them thunderbird has been very slow or not resonding at all. l have uninstalled and reinstalled thunderbird twice. The
-
If I accidently open an app and immediately close it down, it keeps reopening. Why?
If I accidentally open an application, and I go to shut it down immediately, it automatically re-opens itself. It repeats and repeats until I let it complete the opening process. Does anybody have this problem? And if yes, have you resolved it? Thank
-
How to configure G/L accounts for maintenance order completion confirmation IW48.
Hi Gurus When doing completion confirmation of a maintenance order material costs are being posted to Cost of goods sold account. How do I bypass the posting of material costs to this account because the same costs are being posted during settlement
-
Hi I am working on a Proxy to Web service scenario in PI 7.1 Version I have SAP Pre defined message on Source side, and External Parter Message on the target side, Some of the data elements on the Target side are required fields, I am passing the val
-
Programmatically add steps to a VI
I am writing a code to control a bank of valves via cDAQ/DAQmx. I need to figure out how to allow the user to build a macro or something similar that will allow them to programmatically change the order and number of the steps in a sequence. For exa