My harddrive is put in other computer which doesn't start from my org harddrive, but from its own harddrive. No addons, bookmarks or passwords are showing up

My original harddisk is now called "G" (with partitions H&I). System not able to start from "G". Starts from "C". All original settings and programs still on G. How I get my addons, bookmarks or passwords again in Firefox?
Message sent from different comp, so FFversion and pluginsnot right

See this: - http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Similar Messages

HT4910 I tried to update my address book on OS X6 with an abbu from my other computer which has Lion OS X 7. It wiped my address book clean and I cannot retreive by Address book on my OS X 6 computer and saves out there?

I tried to update my address book on OS X6 with an abbu from my other computer which has Lion OS X 7. It wiped my address book clean and I cannot retreive by Address book on my OS X 6 computer and saves out there?

blacksheepfibers wrote:
I updated my mac with os x Lion so that I could accomplish moving my address book from the mac to my new IPad 3G. I also set up an icloud account for this purpose, but I *still* cannot figure out how to move my address book from one computer to the other. When I'm on my mac and try to use bluetooth to export the address book, I'm able to find my ipad but I soon get a message that it does not support the necessary services. I have no idea what's going on and would appreciate any advice. tks in advance, Sarah
The address book syncs via iCloud, not Bluetooth or iTunes.
You upgraded to Lion so you could use iCoud.
On the computer. go to Apple menu > System prefs > iCloud.
Sign into your iCloud account.
Tick everything.
This enalbes the se items syncing to iCloud.
On the iPad, Settings > Mail, Contacts, Calendars.
Create a new iCloud account.
Sign in with the same AppleID as your computer.
Settings > iCloud and turn everything on.
BAM!
That is all you need to do.
Your contacts (and all other checked items checked) will sync between computer and iPad.
No need to use iTunes

I bought a used sprint 4s and tried to put my motorola sim which is also on sprint network into phone but it doesnt work is there something i need to do to make it work or am i SOL?

I bought a used sprint 4s and tried to put my motorola sim which is also on sprint network into phone but it doesnt work is there something i need to do to make it work or am i SOL? major problem is that my current motorola phone is issued to me from my employer but phone ***** so i want to upgrade to the ipone i purchased but it still needs to work like my company phone as they pay the bill. help me pls

A Sprint iPhone uses CDMA when in the US. The SIM is used only when not in the US.
To use it in the US, you have to have Sprint activate it, but it is unlikely they will activate in on your company's account.

I need to know which country imei starts from 01254300

I need to know which country imei starts from 01254300
plzz. help me

read this?
http://en.wikipedia.org/wiki/International_Mobile_Equipment_Identity

My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload and am afraid it 'crashed'

My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died. I tried to stop the upload midway and am afraid it 'crashed'

Try putting it into recovery mode.
Connect iPad to your computer via USB while it's turned on.
Open iTunes
Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
Power off the iPad completely (wait for the progress spinner to disappear).
Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
Click on the "Restore" button and the process will begin.

My OSX10.6.8 only connects to the internet for 5 second intervals?? Modem works fine (husband is not having problem on other computer), restarting doesn't work. Can browse web just fine for 5 seconds until it disconnects. Help??

I am running Mac OSX 10.6.8, but this problem has occurred also while I was running OSX 10.5. This problem happens about once every two or three months, but seems to occur randomly. When I try to connect to a wifi network on this computer, it will only connect for approx. 5 seconds before disconnecting, either telling me the password is wrong (which it is not) or a "connection timeout" message. During this 5 second window, I can access the internet just fine until it disconnects me. I don't understand why it is doing this. My router/modem is working fine, my husband is using our other computer without problem. In the past, restarting my computer a few times seems to do the trick. But at the time of my typing this, it has not made any difference. I am currently connected via an ethernet cable, but I would like to go back to being wireless. Any advice for me?

Welcome to Apple Discussions!
I probably can't help much, but I have occasionally had the same problem. You might try going to System Preferences>Network and look at your Airport connection. See if the diagnostics can help.
Good luck!

I can't update my iPad to iOS 5 because when I plug the iPad up to my laptop or any other computer it doesn't detect the iPad, what's wrong?

Every time I put the USB cord into my iPad and put in my laptop or any other computer it does nothing but says not charging on the iPad, I want to know why my laptop can't detect my iPad, and I updated iTunes don my laptop and I'm trying to update my iPad but can't, I can't even get certain apps because of this so please help

Apple has stopped signing iOS 5. You will need to update to iOS 6.

How to use identity column in table which value always start from one?

Hi all,
Hope doing well,
sir i created one table which has id with number datatype
for which i created sequence and stored procedure so suppose
i inserted two row there it's inserting and id is showing 1, 2
again i truncate that table and again i inserted value there now the id is starting from 3 , 4
so my question is that after truncating table can't it insert from 1 in id column?
thanks,

>
sir i created one table which has id with number datatype
for which i created sequence and stored procedure so suppose
i inserted two row there it's inserting and id is showing 1, 2
again i truncate that table and again i inserted value there now the id is starting from 3 , 4
so my question is that after truncating table can't it insert from 1 in id column?
>
Oracle does not have 'identity' columns.
Oracle sequences are NOT gap free.
Oracle sequences are independent objects and not associated with any other table or object.
If you are wanting a gap-free sequnece of numbers, which is not recommended, you will have to create your own functionality. And that functionality will not be scalable or perform well.

I athorized my iPod so that I can transfer my purchases onto my new computer which has also been athorized to my account but when I try to transfer the music i get a messegestating that my iPod is not authorized to transfer the music back can I get help?

I have athorizedmy iPod so that I could transfer my music purchases bytomycomputer but when I attempt to do thisiget a messege stating that my iPod is not authorized to do this. What step am i missing in the athurization process? Some of my purchesse onmy iPod have some how disappaeared from my iCloud account and I can't find them so the only copy of the music I have is on my iPod can any one help me?????????????????

Hello Fanzaria,
Congratulations on your new computer! It sounds like you are trying to transfer your iTunes purchases from your iPod to iTunes on your computer, but you are repeatedly getting an authorization prompt.
Is it possible that some of these songs were purchased with an Apple ID you may have been using at another time? You mentioned that you don’t see these purchases under your past purchases in the iTunes Store. I recommend checking to see if they are hidden under your current Apple ID using the steps in the section titled “To unhide your purchases” in the following article:
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/ht4919
If you are not seeing all the songs you expect to see after checking for hidden purchases, I recommend searching for an older Apple ID that you may have used. Use the steps in this article to find your Apple ID:
Apple ID: How to find your Apple ID
http://support.apple.com/kb/HT5625
If you find an alternate Apple ID that you used, authorize iTunes with that Apple ID:
Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
I also recommend reviewing the following article for the issue you are experiencing. I recommend reviewing the full article but specifically the section to Remove the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1329 The computer which had my library on it was stolen, but I still have my fully loaded Ipod. Is there any way to download the library from my ipod? It contains much music which was loaded from cds as well as directly from itunes.

Any input on how to move a library from your ipod classic when the original computer was stolen? Especially when there is large quantities of music that is not downloaded, but uploaded from cd.

See Recover your iTunes library from your iPod or iOS device.
tt2

How to compile other java files and run them from my own programs?

I'm developing a unit testing tool for AspectJ, which can originally generate the stubs for aspect unit to be tested. All these stubs are java files. After generation of stubs, how can I program the code to compile this unit together with these stubs, i.e. how can I put the functionality of compilation and run, e.g. command "javac *.java" and "java *", into my own code.
Hope you can understand what I mean.
Thank you in advance.

When I use Runtime.getRuntime().exec(command) for executing the AspectJ compile command "ajc", "IOException createProcess error=2" always occurs, while it is ok for Java comiple command "javac".
Why this happens when I use Runtime.getRuntime().exec("ajc Hello.java Test.aj")? Is it the reason that Runtime.exec(String) may not support any command in DOS?
(ajc is the compile command for the java file and aj file.)
Thank you in advance.

My keychain passwords are showing up in a friends computer.

Hi.
I recently helped a friend upgrade from OSX 10.6 to Mavericks. Everything went smoothly until we went to log her in to some of sites like her email or Facebook.
When she tried to log onto Facebook, my login information autofilled.
I've never entered any of my information onto her computer and I can't figure out why that would be happening. My only guess is that my computer was on the same network at the time were setting hers up.
Does that make sense?
I'm guessing resetting the keychain might work but she's a client so i don't want to get this wrong.
Any help in the right direction would be really helpful.
Thanks in advance for your time.

worldwidejamie wrote:
Could the fact that my computer was on the same network have anything to do with it?
No.

HT4623 Trying to update my iPad to latest iOS. It connects to iTunes and appears to have done everything, to include restore from backup on my computer. When I disconnect from computer the iPad then starts from "Hello", "Select language", "Choose Wi-Fi N

It then asks me to Set Up iPad and I choose "Restore from iTunes Backup" It completes the synch according to iTunes. but the iPad screen just shows connected to iTunes. When I eject from iTunes, the iPad still shows Connect to iTunes. No matter what I do it still shows "iPad Not Set Up" What is Up?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Firefox apparently doesn't start from the icon, but it says it is active when the computer is shut down.

Apparently Firefox is running, but I can't see any evidence of this on the screen. When I reboot the computer, usually I can call up and use Firefox as usual. This is quite a nuisance, as it happens several times an hour. No notification of a crash is provided, ever.

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Anyone know how to remove an old computer that doesn't exist from the iTunes wifi sync list?

I am trying to remove an old computer that I don't have anymore from that list. I tried the 'de-authorize all" but that didn't work.

About De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
Also, see iTunes Store- About authorization and deauthorization.

My harddrive is put in other computer which doesn't start from my org harddrive, but from its own harddrive. No addons, bookmarks or passwords are showing up

Similar Messages

Maybe you are looking for