My hardware is saturated and I can't go on my session
Hello,
I was downloading google crime when i got a message saying my hardware is saturated and that i had to delete some documents but when i wanted to do it,my Mac froze so I restarted it and went on my session and only the apple wallpaper appeared, nothing appears, I can't so anything and I'm really scared. Please help me if you can, thank you x
Try starting up in safe mode - Mac OS X: Starting up in Safe Mode
Press the Power Button and immediately press and hold down the Command and the S keys as the machine starts up. This boots you into Single-user mode and you should see white text appear on the screen.
When you see the # Command prompt, type /sbin/fsck-fy and hit the Return.
Now sit back & let your computer do its thing. This should take approximately 15 minutes or so. Depending on how messed up your computer is. Just be patient.
If and when you see the message File System was modified repeat the steps above again & again until you hopefully see the message "no problems were found." When that happens type reboot and hit Return again.
If these steps do not work then boot from your install disc to repair disk. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
And I tried with the dick
Typo?
Similar Messages
-
Firefox procedure is still running after I exit and I can not open a new session
To clear I have to alt-ctr-del and close the firefox.exe procedure. I am running win xt on a del portable.
See http://kb.mozillazine.org/Firefox_hangs and [[Firefox hangs]] (Hang at exit)
-
In Develop Module, the Basic Panel (white balance, color saturation and tonal scale) disappeared. How can I restore these tools?
When you say the Basic panel has disappeared, do you mean the whole right side panel or individual tools such as the White Balance tool is gone? If it is the whole right side panel that is missing, you may have hidden it. Using the Tab key, you can cycle between hiding and showing the side panels. You can also move your mouse over to the far right side of your screen to get the panel restored but it will disappear when you move your mouse off the panel. There is also a small triangle on the left edge of the right panel that you can right click on in order to determine the show/hide behavior (I personally use the manual mode).
Regarding the individual windows contained in the left/right panels, they can be opened and closed by clicking of the triangle that is displayed next to name of the tool in its header bar. While you can elect what modules will be shown on the LR Top panel, I am not aware of any mechanism to completely hide individual tools in the left/right panels. If all else failes, you can hit the Shift/Tab key combo a few times to restore all of your windows the the default behavior. -
Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hi, Im charan . I recently purchased iPhone 5 in Kuwait. And I live in India so I'm now in India. I'm facing some hardware problem in iPhone 5 Can I place it in INDIAN iStore for Warranty and they do it in warranty basis??
No, the warranty is not international and so will not be valid in India. You will have to take the iPhone back to Kuwait or send it to someone you know there who could take or send it for service and then ship it back to you. If you cannot do that, you will have to find an unauthorized repair shop in India and pay them to repair your iPhone, something which will void all future support from Apple.
Regards. -
The iphone 4s has a slot on the left side of the hardware? What type of slot is it and what can it be used for?
The slot is on the right side and it's for the SIM card.
-
I have an Ipad4 and now it shows a big sceem and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do? Is it a hardware problem?
Look the 2 images on link below:
https://www.dropbox.com/sh/0arufrxzjwwmweu/6Fxz1LjbmdTry Settings > General > Accessibility > Zoom: OFF
Note: You may need to use 3 fingers to tap and scroll. -
I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information. -
Mac's and PCs can no longer connect after 10.4.10 Upgrade SMB Crash - Help
This is my second post on this topic. I have read other similar threads, but none of the advice I have tried has worked so far. We have 4 PCs and 5 Macs at home that were networking nicely until we upgraded the G5 10.4.10. The G5 can browse and connect to any machine on the network. However, no other machine can connect to a shared folder on the G5.
I installed a clean 10.4.10 on a second hard drive and it works fine. So that eliminates hardware and infrastructure. I really did not want to have to reinstall everything from scratch.
I performed an Archive and Install and that did not work.
1) On my G5 I turn on Personal or Windows File Sharing
2) From another computer PC or Mac I attempt to connect to the shared files
3) The connection is made most of the time and I can see the folders. However within a few minutes or the second time I attempt to browse the folders, I get an error.
4) When I return to the G5, the Service is unchecked
The console log is reporting...
Aug 19 18:36:02 G5 crashdump14892: smbd crashed
Aug 19 18:36:02 G5 crashdump14892: crash report written to: /Library/Logs/CrashReporter/smbd.crash.log
Aug 19 18:59:51 G5 crashdump27414: AppleFileServer crashed
Aug 19 18:59:52 G5 crashdump27414: crash report written to: /Library/Logs/CrashReporter/AppleFileServer.crash.log
smbd will crash when attempting a connection from XP
AppleFileServer will crash when attempting a connection from a Mac
The AppleFileServer.crash.log reports (first few lines...)
Binary Images Description:
0x1000 - 0x132fff AppleFileServer /usr/sbin/AppleFileServer
0x8fe00000 - 0x8fe52fff dyld 46.12 /usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x907bb000 - 0x90894fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x908dd000 - 0x908ddfff com.apple.CoreServices 10.4 (???)Usually whan an Archive & Install doesn't work, it's very few things...
Bad prefs/plists carried over.
Some APP or kext or support file not replaced due to permissions, HD Errors, bad aliases, etc.
Bad info in caches. -
Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.
1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2 -
I was just having this problem until today. It is now all sorted and I can explain what to do very simply and easily.
I remembered the answers to my questions, I just forgot "EXACTLY" how I entered the text - so I had to have them reset. The easiest way is to sign in through www.appleid.com. Then on the right click the "Manage your Account" link and sign in. Easy so far right. Then, as others have said, look on the left of the screen you will see a link called "Password and Security" - click on this. Now this is where the confusion begins. Some people have a link located directly under the existing questions that looks like this "Forgot your answers? Send reset security info email to blah blah blah email . If you see this click it and it will send an email to the "Rescue Email" address that you entered when you originally entered your answers. Follow the instructions contained in this email and you are done. If you cannot remember this email address or you have since closed it, you will need to go to the Itunes Express lane and send an email to Apple requesting them to reset your answers.
HOWEVER IF YOU DO NOT SEE A THIS LINK UNDER THE QUESTIONS - this means that you DID NOT enter a Rescue email address when you originally set your questions. The only way you can now reset your Security Questions and Answers is to go to the Itunes Express lane and email Apple asking to have these reset. I have 2 apple accounts, one for myself and one for my daughter - as I did not include a rescue email I had to email apple. On both occasions, these questions were reset and an email sent to me exactly 24 hours after I sent them the request. I entered the new details, WROTE THEM DOWN EXACTLY AS I ENTERED THEM THIS TIME, entered a Rescue Email this time and I am good to go again. Simple. Now when I log in and click on "Password and Security" I do have the reset link visable. Apple support are good, they just take a bit of time to get things done, but they always seem to get there in the end. I just wish someone had taken the time to explain this somewhere else in the forum as it would have saved me much time and angst.
To get to the Itunes Express Lane go to this website www.appleid.com make sure the correct country is displayed top right, if not change it. Once this is saved go to the tabs at the top of the screen and click Support. Then halfway down the next page you will see a photo of two random people with a title of Contact Apple Support - Click this. Scroll down until you see the itunes logo, to the right of this you will see the link Express Lane for iTunes Player and iTunes Store - click on this. One the right hand side of the next page click on the link "itunes Store". On the next page click the link "Account Management" check the radio button beside "itunes store account security", select your country from the drop down box and click "Continue". Under the heading MORE OPTIONS, you will see a clickable link called email - click this. Fill in your name, Apple ID and country. Then in the text box, write "I have forgotten the answers to my Security questions, would you kindly please reset them. Thank-You". Then Click Continue, you will be given a reference number and an email is sent to your address advising that generally someone will attend to your request within 24 hours. Like I said previously, I had to do this twice and both times it was reset however it was done within about 5 minutes of the 24 hour cut off, so you will have to be patient. I know 100% that this works for Australia - I am guessing other countries should be similar. Hope this helps someone somewhere!Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
Having a problem with Add-ons I did not install and now can't uninstall.
Lately I have experienced problems with re-directing and other issues with Mozilla. I looked in my add-ons list and there are several things there that i did not add manually. (I have been having much trouble with ITunes and noticed a plug in in mozilla and want to know if it is necessary.) Is there a way to keep this from happening? I have been using mozilla for years and liked it when I could do a basic install without any add-ons that I did not request. Here is a list of the things that are troubling me - I am sure a few may be necessary. I would appreciate any help anyone can give me with this?
PLUG-INS-
Java Deployment Toolkit 6.0.200.2 NPRuntime Script Plug-in Library for Java(TM) Deploy
Java (TM) Platform SE 6 U20 6.0.200.2 Next Generation Java Plug-in 1.6..0_20 for Mozilla Browsers
Mozilla Default Plug In
(THESE LAST THREE ALL CAME UP AS UNIDENTIFIED PLUG-IN ON MOZILLA PLUG IN CHECK SITE)
Itunes Application Detector 1.0.1.1
Itunes Detector Plug-In
Wacom Dynamic Link Library 1.1.0.3
Wacom Dynamic Link Library
Windows Presentation Foundation 3.5.30729.1
Windows presentation foundation (WPF) plug-in for Mozilla Browsers
EXTENSIONS_ Java Console 6.0.23
Java Console 6.0.20
(Just curious with these two Java consoles - which by the way I am unable to uninstall - the uninstall button is grayed out. and I can only disable.)
Really frustrated with this, I have already uninstalled Firefox and re-installed it - losing all my bookmarks and these add-ons were there after the re-install. PLEASE HELP!For camera problem try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
I do not understand what you mean about your update problem -
I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong?
I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.
Hello,
You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
http://support.apple.com/kb/HT1619
If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
Best of luck -
Why is my Macbook pro so slow? And what can I do to fix this?
Greetings, I got my MacBook pro one and a half a year ago. For some reason, the last 4 months the computer has started to slow down. I get issues such as.
- Beach ball appearing to often, even for simple commands such as open folder. etc.
- Video files skipping frames. (any video file on any program. Even if its a buffer video such as youtube or Netflix).
- Programs such as Photshop, Final Cut Pro etc, takes forever to render and work properly.
- Web Browser taking forever to close a tab.
I am currently running a OS X V.10.8.5
2.3 GHz Intel Core i7
4GB 1600 MHz DDR3
353.2GB Freespace out of 499.25.
Could any one explain why would a mac slow down? (not a speculation, just why would it slow down like this. Especially the beach ball uninvited appearence).
I looked up the problem on the net, I get way to many differant answears that lead to getting scam programs, and or other 3rd party programs. (I did not download any of them)
I hope some of you understand the problem and have an answear to this. I tried to ask apple support, but they ask for money. I have a feeling that mac slow down forcing you to buy support intentionally (this is just a thought).
I avoid downloading uppdates from apple, because most people I know who uppdate macs always end up with a slow computer. + Last time I tried to uppdate the mac, I got a gray screen that blocked me from using the computer at all. To avoid this problem again, uppdating is not an option.
Pardon my English, it is not my native tounge.
Thank you for reading.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PPATH=/usr/bin:/bin:/usr/sbin:/sbin;clear;c01='\nRAM details\n%s\n';c02='pmset -g';c03='boot-args';c04=(/ "");c05=(System User);c06='user %s%%, system %s%%';c07='/usr/libexec/PlistBuddy -c Print';c08='%s\n\t(%s)\n';c09='defaults read';c10=networksetup;c11='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$';c12='com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive';c13=(Desktop L*/Keyc*);c14=(20 7);c15=(100 25);c16=(down up);c17=(recvfrom sendto);c18='\n%s\n\n%s\n';c19='\n%s: %s\n';c20='s/^ *//;5p;6p;8p;12p';c21='/ Id/s/.+: //p;/Mem/{s/[^0-9]//g;p;}';c22='1,5d;/[my].*:/d;p';c23='5,6p';c24='/Cy|Cond.*: [^N]/s/^.*://p';c25='/:$/{s/ *:$//;x;s/\n//;/Apple|Genesy|Intel|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}';c26='/id: N|te: Y/p';F01(){ ((s00==0));};F02(){ o=;a=;((s01==0));};F03(){ system_profiler SP${1}DataType|sed -En "$2";};F04(){ o=`echo $o`;[[ ! "$o" =~ ^0?$ ]]&&printf "$c19" "$1" "$o";};F05(){ o=$((o<$2?o:0));F04 "$1";};F06(){ [[ "$o" ]]&&o=`sed -E '/^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g'<<<"$o"`&&printf "$c18" "$1" "$o";};F07(){ o=$((o>=$2?o:0));F04 "$1";};F08(){ $c07\ :CFBundleIdentifier "$1";};F09(){ $2 launchctl list|awk 'NR>1&&!/0x|\.[0-9]+$|com\.apple\.(AirPortBaseStationAgent|launchctl\.(Aqua|Background|System))$/{print $3}'|grep -Fv "$1";};F10(){ find -L "$1" -type f|while read f;do file -b "$f"|egrep -lq XML\|exec&&echo $f;done;};F11(){ o=`grep -v '^ *#' "$2"`;l=`wc -l<<<"$o"`;((l>25))&&o=`head -n25<<<"$o"`$'\n'"and $((l-25)) more line(s)";F06 "$1";F12 "$1";};F12(){ o=`file -b "$1"|egrep -v '^(A.{16}t$|cann)'`;F04 "${1##*/} format";};F13(){ o=`$c07 "$2"|awk -F'= ' \/$3'/{print $2}'`;F06 "$1";};F14(){ [[ "$a" ]]||return;n=$((${#a[*]}-1));c="${a[*]}";a[$n]=${a[$n]%[.+-]*};o=$((a[n]/$1));F07 "Current $3 activity by process \"${c% ${a[$((n-1))]}*}\" with UID ${a[$((n-1))]} ($4)" $2;};F15(){ echo "No $1 access"$'\n';};id -G|grep -qw 80;s00=$?;F01&&sudo true;s01=$?;s02=`date +%s`;clear;s03=$((s02-`sysctl -n kern.boottime|cut -c9-18`));{ F01||F15 admin;F01&&! F02&&F15 root;F03 Software "$c20";a=(`F03 Hardware "$c21"`);o=$a;F04 Model;o=${a[1]};F05 "Total RAM (GB)" 4;o=`F03 Memory "$c22"`;[[ "$o" =~ s:\ [^EO]|x([^08]|02[^F]|8[^0]) ]]&&printf "$c01" "$o";o=`F03 Diagnostics "$c23"`;[[ "$o" =~ Pass ]]||F06 POST;a=(`F03 Power "$c24"`);o=$a;F07 "Battery cycles" 300;o="${a[1]}";F04 "Battery condition";for i in FireWire Thunderbolt USB;do o=`F03 $i "$c25"`;F06 $i;done;o=`$c02 therm|sed 's/^.*C/C/'`;[[ "$o" =~ No\ th|pms ]]&&o=;F06 Heat;o=`$c02 sysload|grep -v :`;[[ "$o" =~ =\ [^GO] ]]||o=;F06 "System load";o=`nvram $c03|awk '{$1=""};1'`;F04 $c03;o=`fdesetup status|sed -En '/Of/!{s/^.+is |\.//g;p;}'`;F04 FileVault;for i in 0 1;do o=`cd ${c04[$i]}L*/Lo*/Diag*||continue;for j in *.{cr,h,pa,s}*;do [[ -f "$j" ]]||continue;d=$(stat -f%Sc -t%F "$j");[[ "$j" =~ h$ ]]&&grep -lq "^Thread c" "$j"&&j="$j *";echo "$d ${j%%_2*} ${j##*.}";done|sort|tail`;F06 "${c05[$i]} diagnostics";done;grep -lq '*$'<<<"$o"&&printf $'\n\t* Code injection\n';o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|dead[^l]|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' -o -k Sender fseventsd -k Message CReq 'SL'|tail -n25|awk '/:/{$4=""};1'`;F06 Log;o=`df -m /|awk 'NR==2{print $4}'`;F05 "Free space (MiB)" 5120;o=$(($(vm_stat|awk '/eo/{sub("\\.","");print $2}')/256));F07 "Pageouts (MiB)" 1024;a=( `sar -u 1 10|sed '$!d'` );((a[4]<85))&&o=`printf "$c06" ${a[1]} ${a[3]}`||o=;F04 "Total CPU activity"&&{ a=(`ps acrx -o comm,ruid,%cpu|sed '2!d'`);F14 1 0 CPU %;};o=`iostat -n1|awk 'NR==3{printf "%d",$3}'`;F07 "Average I/O (MB/s)" 5;F02&&a=(`sudo iotop -C 10 1 -m/|awk '$8~/[RW]/{print $4,$1,$9}'|tail -1`);F14 10000000 5 I/O MB/s;a=(`top -R -l1 -n1 -o prt -stats command,uid,prt|tail -1`);F14 1 25000 port \#; s05=`pkgutil --regexp --only-files --files com.apple.pkg.*|sort|uniq|sed 's:^:/:'`;s06=`egrep '\.(kext|xpc)/(Contents/)?Info.plist$'<<<"$s05"|while read i;do [[ -f "$i" ]]&&F08 "$i";done`;o=`kextstat -kl|grep -Fv "$s06"|cut -c53-|cut -d\< -f1`;F06 kexts;s07=`egrep 'Launch[AD].+\.plist$'<<<"$s05"`;s08=`while read i;do [[ -f $i ]]&&$c07\ :Label $f;done<<<"$s07"`$'\n'"$s06";F02&&o=`F09 "$s08" sudo`;F06 Daemons;o=`F09 "$s08"`;F06 Agents;o=`for i in {/,}L*/Lau*;do F10 $i;done|grep -Fv "$s07"|while read i;do j=$($c07\ :Label "$i")||j="No job label";printf "$c08" "$i" "$j";done`;F06 launchd;o=`for i in /{S*/,}L*/StartupItems;do F10 $i;done`;F06 "Startup items";s09=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d'<<<"$s05"`;s10=`egrep '^/usr/lib/.+dylib$'<<<"$s05"`;s11=`lsbom -pfc /var/db/*/*.BSD.bom|sed -En '/peri.+\/.+\./s/^\.\/[^/]+//p'`;[[ "$s09"&&"$s10"&&"$s11" ]]&&{ o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune|grep -Fv "$s09"|while read i;do j="$i"/Info.plist;[[ -f "$j" ]]||continue;k=$(F08 "$j")||k="No bundle ID";printf "$c08" "${i%/Contents}" "$k";done`;F06 Bundles;o=`find /usr/lib -type f -name *.dylib|grep -Fv "$s10"`;F06 dylibs;o=`find -L {,/u*/lo*}/e*/periodic -type f -exec cksum {} \;|awk '{print $3"\t"$1}'|grep -Fv "$s11"|awk '{print $1}'`;F06 periodic;:;}||echo $'\nReceipts missing';o=`for i in Ic10ERT_LIBRARIES LIBRARY_PATH;do launchctl getenv DYLD_$i;done`;F06 "Inserted dylibs";o=;$c09 /Library/Preferences/com.apple.alf globalstate|grep -q 0||o=On;F04 Firewall;o=`scutil --proxy|egrep 'Prox.+: [^0]'`;F06 Proxies;o=`scutil --dns|awk '/r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./{print $NF;exit}'`;s12=`route -n get default|awk '/e:/{print $2}'`;s13=`$c10 -listnetworkserviceorder|sed -En '/ '$s12'\)$/{x;s/^\(.+\) //p;q;};x'`;s14=`$c10 -getdnsservers "$s13"|awk '!/^T/{printf "not ";exit}'`;F04 "DNS (${s14}from DHCP)";o=`$c10 -getinfo "$s13"|awk '/k:/&&$3!~/(255\.){3}0/;/bi:/&&$2!~/A/'`;F06 TCP/IP;[[ "$s13" =~ [AW]i ]]&&{ o=`/S*/*/P*/*/*/*/*/airport -I|awk '/lR/{print $2}'`;F05 RSSI -86;};s15=(`netstat -b -I $s12|tail -1|awk '{print $7,$10}'`);for i in 0 1;do o=$((s15[i]/s03/1024));F07 "Average ${c16[$i]}load activity (KiB/s)" ${c15[$i]};F02&&a=(`sudo dtrace -n 'syscall::'${c17[$i]}':return {@[execname,uid]=sum(arg0)} tick-10sec {exit(0)}'|tail -1`);F14 10240 0 ${c16[$i]}load KiB/s;done;F02&&o=`sudo profiles -P|grep :|wc -l`;F04 Profiles;i=auto_master;[[ `md5 -q /etc/$i` =~ ^b166 ]]||F11 $i /etc/$i;for i in fstab sysctl.conf crontab launchd.conf;do F11 $i /etc/$i;done;i=/etc/hosts;F11 hosts <(egrep -v "$c11" $i );F12 $i;F11 "User launchd" ~/.launchd*;F02&&F11 "Root crontab" <(sudo crontab -l);F11 "User crontab" <(crontab -l);F02&&o=`sudo $c09 com.apple.loginwindow LoginHook`;F06 "Login hook";s16="$(`find /S*/*/F* -type f -name lsregister|head -n1` -dump)";o=`for i in $c12;do [[ "$s16" =~ $i ]]&&echo $i;done`;F06 Apps;F13 "Global login items" /L*/P*/loginw* Path;F13 "User login items" L*/P*/*loginit* Name;F13 "Safari extensions" L*/Saf*/*/E*.plist Bundle|sed -E 's/(\..*$|-[1-9])//g';o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)|wc -l`;F07 "Restricted files" 50;cd;o=`find .??* -path .Trash -prune -o -type d -name *.app -print -prune`;F06 "Hidden apps";o=`F03 Fonts "$c26"|wc -l`;F04 "Font issues";o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist|while read i;do plutil -s "$i" >&-||echo $i;done`;F06 "Bad plists";for i in 0 1;do o=`find "${c13[$i]}" -type f -maxdepth 1|wc -l`;F07 "${c13[$i]##*/} files" ${c14[$i]};done;o=;((UID==0))&&o=root;F04 UID;o=$((`date +%s`-s02));F04 "Elapsed time (s)";} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At or near the top of the results, there will be a line that begins with "System Version." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
C4580 All-In-One suddenly lost wireless connection and I can't get it back.
I have a replacement C4580 after HP replaced the old one because of their dmaned regionalisation of printers.
It has been working fine through my wireless router, and I have been able to use it wirelessly on 2 different laptops, one running XP and the other running Win 7. both have the printer showing as USB and wirless, normally being used wirelessly. THhe USB is there 'just in case' like now apparently.
It seems that my wireless printer has disappeared from my Printers and Faxes in the XP machine, so I try to add it again. Can't detect any printers, so when it asks to be connected via USB it appears to be going through the setup, then I get Error #201 VSA.
Googled for an answer but haven't found anything useful. Seen a couple which suggest that the router is hiding the SSID (it's not) or that MAC filtering is being used. Again, it's not.
I went to the Win7 machine, and it shows the wireless and USB printers (2 versions of the same thing) but when I attempt to print a test page tot the wireless version, it says that it has been sent, and I can see it in the printer queue, but after a while I get Error-Printing which in typical HP software is as usual bloody useless as it doesn't tell you why it failed, or where to even start looking to correct whatever error there was.
I have altered nothing on any of the computers (knowingly, anyway) and both laptops communicate quite happily with the outside world through the wirless router.
I really am getting rather pi**ed off with HP and their latest software. I had a PSC 1210 prior to this and no problems with it at all. The hardware seems fine but the latest software leaves a lot to be desired.
Any ideas anyone, on what has happened here, and how it can be fixed - or do I just cut my losses and buy another printer, this time anything but HP - unless they're all doing the same sort of stuff.
I have tried turning the wireless function off and then on on the printer, but also no difference.
Additional info. As suggested in another post somewhere, I have done both a Network Configuration and a Wireless Network Test printout. The test report shows PASS against both Wireless On and Wireless Working, and FAIL against Network Name (SSID) Found, but then shows the Network Name (SSID) correctly under Configuration Summary!
The configuration page shows Netwok Status as offline, and under 802.11 Wireless it gives a MAc address then Status as Disabled.
I don't really know what it is trying to tell me?
Oh, accidentally I printed 2 Configuration pages. On one it says that the 802.11 Status is Disabled and on the other it says that it is Disconnected. Unfortunately, I don't know which one was done first. The Disconnected one may have been done when I turned the wireless off. Nope, I just did again with Wireless turned on (at least the light is showing) and it still showing as Disconnected.Hi there KR,
Sorry to hear the reset is not working for you on your PS C4580. The steps for the reset are all correct and should have worked if the printer is in good functioning order.
I would suggest calling in to HP directly to see what your options are with them.
If you decide to call them, this is their contact info:
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!
Maybe you are looking for
-
Lookout OPC Client – Asynchronous I/O and Update Rate serious problems (Sequence of data)
I am using the Lookout OPCClient driver to connect to AB PLCs (EtherNet/IP protocol) and power measurement equipment (Modbus TCP protocol). The OPC server is the NI OPC Servers. The data that are read out from PLCs and PMs are energy meter readings,
-
User Exit for Company Code verification
Helo All. I have to add a validation that Company code of the sales organisation should be same as company code of the plant from where the product is sourced. Is there any User Exit for this? Thanks in advance.
-
Array of clusters TAB next element
I have an array of clusters and I want with the TAB key, when I am at the last element of the cluster i, move to the first element of the cluster i+1. Jean-Marc Jean-Marc LV2009 and LV2013 Free PDF Report with iTextSharp Attachments: Array of cluster
-
Photo booth is saying no camera connected
When trying to open photo booth it is saying no camera is connected
-
I can not restore my ipod