My HD installation, thanks for tips

I wanted to go with WD black scorpio but after hearing from and here and other reviews that it had problems I went with the Hitachi travelstar 7200..
Kudos for Newegg. $98 free shipping with a $30 rebate and I got it the next day, wow.
I did it myself after hearing that the apple store was backed up and wanted $85
I printed out the instructions of 6 pages and placed the screws on each page.
The only difficult part was getting the front part of the keypad cover off. it snaps in so it has to snap off. Also getting the ribbon cable off which is stuck on the old HD needs to be done carefully.
Other than that when I got everything back together it wouldn't boot up..
Oh bummer, what's wrong, what did I do, I did a great job.
Started taking it apart again and saw nothing wrong, checked all the connectors.
then I noticed after putting the Ram back in I didn't have it all the way in.. duhhh.
then it booted right up. Put in my os10.5 used disk utility to format, plugged in my Carbon Copy backup and booted up from that drive then copied all files back and made my boot camp partition and away we go.
Bu the way, you cannot hear the HD at all, no vibration and what I have noticed so far that it boots up much faster.
I haven't done any pictures editing in PS yet, I am sure things will run faster there where It was getting slow on my old hd with only 5 gigs of mem left.

Travelstar drives may have improved, but they have less than a stellar past reputation. Keep your data backed up*:
http://www.macmaps.com/backup.html
- * Links to my apges may give me compensation.

Similar Messages

  • I have a new MacBook and I'm having trouble with the help section. I would like to rearrange the order of my photos with in an Event, how do I do this? I follow the directions but it will not work. Thanks for some tips.

    I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing?  Thanks for any tips.

    Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!

  • Trouble installing Creative Cloud Desktop. After running the installer  the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. New member here, thanks for the time.

    After running the installer  the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. I attempted to quit the install and restart but it produced the same result.  New member here, thanks for the time.

    Avanmanandfriends please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html which discusses how to resolve your current error.

  • We have misplaced our installation CD for Creative Suite 5 here at Columbia College and want to know how we can install it on a computer on campus. The S/N is removed -kglad . Can you help us with that, please? Thanks, Chuck

    How can we attain another installation CD, or download online, Creative Suite 5?
    We've misplaced the installation CD and need to install it on one of our computers.
    Thanks,
    Chuck

    don't post your serial number anywhere, much less a public forum.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • App tries to send mail via Thunderbird, "PostMail error# 2" is shown. All my collegues with the same installation do not have this problem. Thanks for your time

    When a external application tries to send an email via Thunderbird i get an error message, roughly translated it says: "Something went wrong with PostMail, error number 2"
    My collegues have the same setup, they have no problem what so ever when sending mail via this way. Any tips would be most welcome. Thanks for your time.

    Continue at your other thread.
    https://support.mozilla.org/en-US/questions/1053959

  • I spilled a small amount of wine on my macbook pro, I know, killing myself over this! I dried it fully but 24 hours later the keys are very sticky and it won't find the Bluetooth module - everything else seems to be working fine. Thanks for any tips!

    I spilled a small amount of wine on my macbook pro keyboard, I know, killing myself over this! I dried it fully but 24 hours later the keys are very sticky and it won't find the Bluetooth module so I can't use my magic mouse - everything else seems to be working fine. Thanks for any tips!

    Your keyboard will never be right again; it needs to be replaced. There's no effective way to clean sticky stuff out of it. Your Bluetooth module may have been shorted out and destroyed, and it probably isn't dry yet after only 24 hours.
    Take your machine in for repair, and expect a hefty bill in the hundreds of dollars.

  • I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

    I can not do the update , what should I do to fix this error ?
    "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

    Hi,
    Please refer to the help document below:
    Error downloading, installing, or updating Creative Cloud applications
    Regards,
    Sheena

  • Java instance installation fails for EP 6.0 SR1 on AIX 5.1/Oracle 9.2

    Hi Friends
    I am currently installing EP 6.0 SR1 on NW04 on AIX 5.2 & Oracle 9.2.0.1, last few steps of installation I applied Oracle patchset 9.2.0.5. I am using the option SAPNW SR1-> Java system -> Central system ->custom installation-> Java system, the installation stops at step 30(Load Java database content) of 36 giving the message "java.sql.SQLException:Ioexception: The Network adapter could not establish the connection.
    I am also attaching the contents of log jload.log & jload.java.log. Really appreciate if somebody who has faced similar problem or knows the solution can provide a tip, thanks in advance.
    CDBAXD08:oraepd 27> more jload.log
    11.03.05 20:05 com.sap.inst.jload.Jload main
    INFO: Jload -sec
    EPD,jdbc/pool/EPD,/sapmnt/EPD/global/security/data/SecStore.properties,/
    sapmnt/EPD/global/
    security/data/SecStore.key -dataDir /epinst/was_java/J2EE_OSINDEP/J2EE-
    ENG/JDMP -job /tmp/sapinst_instdir/N
    W04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/IMPORT.XML -
    log /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
    /jload.log
    11.03.05 20:05 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    java.sql.SQLException: Io exception: The Network Adapter could not
    establish the connection
    CDBAXD08:oraepd 28> more jload.java.log
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
    ClassicVM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM)
    build caix64142ifx-20041126 (JIT en
    abled: jitc))
    Mar 11, 2005 8:05:10 PM com.sap.inst.jload.Jload main
    INFO: Jload -sec
    EPD,jdbc/pool/EPD,/sapmnt/EPD/global/security/data/SecStore.properties,/
    sapmnt/EPD/global/
    security/data/SecStore.key -dataDir /epinst/was_java/J2EE_OSINDEP/J2EE-
    ENG/JDMP -job /tmp/sapinst_instdir/N
    W04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST/IMPORT.XML -
    log /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST
    /jload.log
    Mar 11, 2005 8:05:15 PM com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    java.sql.SQLException: Io exception: The Network Adapter could not
    establish the connection
    FYI the SID name given to the Java instance is EPD & the output of
    java -version of the 3 id's root, epdadm & oraepd is as attached.
    CDBAXD08:epdadm 1> java -version
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
    Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM)
    build caix64142ifx-20041126 (JIT enabled: jitc))
    Thanks & Rgds,
    Abhishek

    Hi Abhishek,
    I'm trying to install EP 6.0 SR1 on Aix and DB2.   I'm having problems with Secure Store installation step (Encryption: JCE and Crypto Toolkit).
    Did you have any problems with this ?   From which place did you get the JCE file ? 
    Thanks for your help, I really appreciate it !
    Regards from Mexico,
    Diego

  • I lost the installation disks for CS4 master collection. Where can I download the installation file?

    Hello,
    I lost the installation disks for CS4 master collection polish version. Where can I download the installation file?

    Hi filmowka,
    Welcome to the Community!
    Go to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and choose Master collection CS4 from the list.
    Follow the Very Important Section else the download will not start.
    Thanks!
    Ankit

  • Installation guide for 9ias on RedHat Advanced Server 3

    Hi
    Does anyone has the installation guide for 9ias on RedHat Advanced Server 3 please? Thank you!

    there is an installation guide for oracle applic server 9 and above on red hat advanced server 3 in pdf format on the linux technology center page on oracle. here is the file link.
    "Install Guide: Oracle Application Server on Red Hat Enterprise Linux AS (PDF) May 2003"
    you may wanna check the following link for that page.
    http://otn.oracle.com/tech/linux/index.html
    is this what you are looking for?
    asif
         

  • New Build - Looking for Tips

    So I have purchased the components listed in my Sig and getting ready to set everything up, just wanting to get some tips/advice on the best way to go about it.
    My biggest question is concerning RAID, as this is the first time I have set one up. Any tips, guides, etc. on how best to accomplish this on my MB is appreciated. I am wanting to end up with a 1TB RAID 1+0 (4 500GB drives paired up, both pairs RAID 1, then one pair RAID 0 of the other pair). Am I correct in assuming it is best to plug only 2 in (SATA 1&2) setup the RAID 1 on those, then plug the other 2 in (SATA 3&4) and set those up as RAID 1, then tie everything together as with RAID 0? Or can I plug them all in and do it all at once? The instructions look fairly straight forward, just looking for some clarity and actual user input.
    Do I need to update my BIOS? I haven't tried booting at all, so not sure what I am starting with, but I notice in the CPU compatibility the same CPU I have lists Version 10.4. Should I stick with what I have and only upgrade if I am having issues, or should I upgrade from the start.
    I have a SATA Blu-Ray burner, and have seen a few things mentioning a SATA ODD coming up under RAID configurations. Is this an issue, is there a certain SATA port I should use to avoid this, certain settings I need to pay attention to, or does it matter?
    Regarding memory, I read (in a sticky) that fewer memory sticks result in faster performance due to Dual Channels. I was under the impression that if all 4 slots were filled you would have 2 groups, each using Dual Channel. Am I incorrect in that? If faster performance (MHz-wise) is achieved by only using 2 sticks, will I get better overall results by removing 2 sticks (leaving only 4GB) or will the additional memory compensate for the speed loss? (The RAM is rated as being Dual Channel, if that makes a difference).
    Does anyone have any general computer building tips? I have built a number of them before, but would like some input on the best/most efficient/fewest problems way is. All previous builds have been done with default configurations, if anyone has suggestions for some settings that they recommend those are welcome. I will be over-clocking at some point, depending on how things go and if there is any advantage to doing so from the start or waiting until the system is setup. I did notice this MB has a OC center as well as the Easy OC Switch. Any input or thoughts on those?
    To sum it up, I am looking for as much input on getting everything set up as easily as possible, with the best settings without requiring a lot of adjustments. Any and all input is appreciated!

    Quote from: Bas on 22-September-10, 15:45:56
    Windows rating is rather silly, it's not the sum of the system but rather the slowest part that gives you this rating.
    Yeah, I agree with the silliness of Windows final rating, however I do like to use the individual ratings as a sort of benchmark. The issue isn't the final rating, it the rating I am receiving for my processor, which is 4.1, and is the lowest rating on there.
    From memory -
    Processor - 4.1
    RAM - 4.9
    Graphics - 7.4
    Gaming - 7.1
    HD - 5.9
    As a comparison, another computer with a 2.2GHz quad core processor, 4GB RAM, and single drive rates as follows:
    Processor - 6.9
    RAM - 7.2
    Graphics - 4.8
    Gaming - 6.1
    HD - 5.9
    With the components I have vs the comparison computer, I would expect CPU, RAM, and HD to all be higher, but they are lower or the same! So something somewhere is not right in my opinion.
    Thanks for any feedback!

  • I have two iPads and giving one to my grandson. Using my Apple id for both, can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

    I have two iPads and giving 1st gen. to my grandson. Using my Apple idI for both... can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

    Look at this link.
    Giving your former iPad to a spouse or family member: the quick guide
    http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • What are installations material for Solution Manager 7.0 EHP 1

    hi friends,
    we plan to do installing Solution Manager 7.0 ehp1,
    can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
    thanks..

    https://service.sap.com/swdc
    ->  SAP Installations and Upgrades
    -> Installations and Upgrades - Entry by Application Group
    -> SAP Technology Components
    -> SAP SOLUTION MANAGER
    -> SAP SOLUTION MANAGER 7.0 EHP 1
    -> Installation and Upgrade
    Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
    Installation.
    Nelis

  • How do I order a replacement installation disc for an hp laptop?

    I have lost my installation disc for my HP Laptop.  It is a Windows Vista Home Premium DEMac: HP, the serial number is: {Personal Information Removed}.  I have a problem with the computer and the screen tells me to: 1. "Insert windows installation disc and restart the computer."  2. "Choose language settings, and then click next." 3. Click "Repair your computer."  How do I order a replacement disc?

    Hi,
    You have not read the above topic. Please call HP to order using a number near you:
    World wide support:
        http://welcome.hp.com/country/w1/en/contact_us.html
    In the US:
        http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Installation document for SAP NetWeaver 7.01 ABAP Trial Version on XP

    Hi Experts
    Please give me link of installation document  for SAP NetWeaver 7.01 ABAP Trial Version on XP or Tell me Steps for installation.
    thanks
    Best Regards
    Jitender

    If instructions contained in download doesn't help you you just have to search on SDN and web for miniSAP installation blogs:
    /people/sap.user72/blog/2004/12/08/mini-me-of-was-620-the-saga-continues
    http://sapport.blogspot.com/search/label/miniSAP
    /people/sugree.phatanapherom/blog/2005/08/17/a-visual-installation-guide-on-sneak-preview-sap-netweaver-04-abap-edition
    /people/manfred.lutz/blog/2008/02/21/web-dynpro-abap-exercises-from-teched-2007

Maybe you are looking for

  • Drag and drop to T/L, dragging vid with aud, no thumbnails, other errati

    Here's my first post, from my first Mac, on this forum in this great Apple world... I'm working through Diana Weynand's FCP6 training book and have the following oddities: 1-drag and drop from the Browser to the timeline does not work. I can drag fro

  • IMessages sending to iPhone without data/wifi

    Hi all, When I text my friend with my iPhone it goes through and says "delivered" however it is sending through as iMessage. My friend however has no data plan. I thought it was when she had wifi but the times I texted, she didn't and it still went t

  • Mac Mail 3 html formatting issues

    I have some people I've been working with who recently upgraded to Mac Mail 3 and since a quarantine report they receive about email that was filtered no longer displays correctly. It displays correctly for anyone using anything other than Mac Mail 3

  • Formatting a HD to NTFS?

    I am trying to format an external HD to NTFS format. I dont want it to be formatted to FAT for size limitations and dont want it to be limited to a Mac format as PCs wont be able to read the drive. Can someone please help me? Thanks

  • My iPod touch (4th gen) keeps crashing when I try to run my apps.

    And that happens with EVERY app I try to launch, and they don't open past the loading interface. For example, if I select iBooks, it starts up and the initial loading empty bookshelf shows up but then after a couple of seconds the app crashes and I'm