My HD is not been identified. What can I do?

My external is not been identified by Macbook. How can I fix it?

I really don't know what else to try except for restoring the iPad - or letting the battery totally drain, recharge the iPad and then see if it will work.
The problem with letting the battery drain is I would be afraid that you would not be able to turn the iPad on. However, usually when you recharge the iPad, it turns on again by itself.
Anyway, in the meantime, until you can get this resolved -  you don't have to turn the iPad off for my reason other than to restart for troubleshooting purposes. If the iPad will recharge and if it goes to sleep OK, there is no reason to have to turn it off.
When exactly happens when you try to reboot? Does the red slider at appear at all?

Similar Messages

  • I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

    I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

    Why do you need InDesign CS (that is version 3) or InDesign CS3 (that is Version 5) to install InDesign CS5.5 (it is version 7.5)?
    If it is an upgrade and asks you to input your serial of an older version, you have to get an find it. No one will help you here. If you can't find it and if you have not registered it, you are out of luck. You will have to spend money for a new version.

  • Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???

    Aperture is asking to upgrade library every time I open the application, even after it has already been upgraded.  I just ran the update and it is still not fixed.  What can I do???  My plug are asking me to re-register them too.  This is annoying.  Please help!!!!!

    How do you try to start the repair dialogue? By starting Aperture or by opening the Library?
    If you not already have tried it with directly opening the library: 
    reveal your Aperture Library in the Finder
    Whilst holding down Command(⌘)- option (⌥) double click on the Aperture Library.
    Select "repair library" from the dialogue.
    What about Frank Caggiano's questions above?
    It would be really helpful to know, how many libraries you have, and if this problem is restricted to one of them.

  • TS1292 i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!

    i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!

    Does the person who gave it to you still have the receipt ? You can try contacting iTunes Support and see what they say (you will probably need to give them images of the front and back of the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

  • I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled.  I reset my password but it still does not work.  What can I do?

    I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled.  I reset my password but it still does not work.  What can I do?

    Crich,
    The usual reasons for an Apple ID getting disabled are either unauthorized activity or violations of the Terms & Conditions. 
    Submit your request to iTunes Customer Service and if appropriate, they will re-enable it.

  • I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now.  I know this is not normal.  What can I do?  It synced just fine, but has been stuck on" updating ipod software for 3 hours now!

    I am updating the software on my daughters IPOD touch 4th generation and it is going on 4 hours now.  I know this is not normal.  What can I do?  It synced just fine, but has been stuck on "updating ipod software" for 3 hours now!
    She has had it for about 6 months and this is the first time we have plugged it into the computer since then.  I can not exit out of itunes either.

    If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required.  You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

  • My laptop and kobo ereader have both been authorized with ADE yet I can't open ebooks in my ereader. A message pops up saying that my ereader is not authorized. What can I do?

    My laptop and kobo ereader have both been authorized with ADE yet I can't open ebooks in my ereader. A message pops up saying that my ereader is not authorized. What can I do?

    My laptop and kobo ereader have both been authorized with ADE yet I can't open ebooks in my ereader. A message pops up saying that my ereader is not authorized. What can I do?

  • Hi, I currently have iTunes version 10.4 loaded on my windows desktop. I'm trying to download version 10.6 but have been unsuccessful. My system saying that current iTunes.msi file is not valid. What can I do?

    Hi, I currently have iTunes version 10.4 loaded on my windows desktop. I'm trying to download version 10.6 but have been unsuccessful. My system saying that current iTunes.msi file is not valid. What can I do?

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I own a new IPhone 5s. I have been able to back it up only once since January 10,2014. It simply will not backup. What can I do? In addition Diagnostic

    I own a new IPhone 5s. I have been able to back it up to ICloud only once since January 10,2014. I am traveling in Italy and need to backup my photos.It simply will not backup. What can I do? In addition Diagnostic & usage data is showing many many crashes?
    What can I do to correct this?

    If you use Lion, boot into your recovery pressing Command and R buttons, press "Utilities" menu, open Terminal and write:
    resetpassword
    If you have Snow Leopard, boot into your install DVD pressing C button, click "Utilities" and press Password Reset

  • My macbook has been stolen what can I do....?

    my macbook has been stolen what can I do....?

    Report it to the police. Read the relevant links below:
    What To Do If Your iDevice or Computer Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Mac Computer
           Find My Mac can be used from Find My Phone at iCloud.com and via Find
           My Phone on your iDevice.
          The following is third-party anti-theft software:
               1.  STEM 2.1
               2.  MacPhoneHome 3.5
               3.  MacTrack 7.5.0
               4.  VUWER 1.7
               5.  Sneaky Bastar* 0.2.0
               6.  Undercover 5.1.1
               7.  LoJack for Laptops
               8. Hidden 2.0
               9. Prey 0.6.2

  • HT5444 I would like to use a copy of Mountain Lion for development, but the store tells me I cannot download it because my MacBook 4,1 is not compatible! What can I do to download it?

    I would like to use a copy of Mountain Lion for development, but the store tells me I cannot download it because my MacBook 4,1 is not compatible! What can I do to download it?
    I have paid for it and all...

    You can't do anything. See:
    OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    Your computer does not meet the requirements to run Mountain Lion.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?

    The problem has been fixed with the most recent OS X software update.

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • The proximity sensor  in my iphone 4 is not workin. What can i do?

    The proximity sensor  in my iphone 4 is not workin. What can i do?

    Hey there JLOGON,
    It sounds like your proximity sensor is not sensing your face when you go to answer a call. I would try these steps to help troubleshoot the issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Screen won't lock or go black when answering calls
    Verify mute or speaker have not been activated, just prior to placing your ear over the receiver.
    While on a call hold your hand over the top third of the display, and verify that the screen is locked or goes to sleep.
    Try turning iPhone off and then on again.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    i clicked erase content and setting before 12 hours but it is not processing till ie not completed till what can i do

    On a 4S the erase should take under 10 seconds. As it has taken longer there must have been data corruption on the phone. Reboot it by holding HOME and SLEEP until an Apple logo appears. If it has not be cleared of all data connect it to iTunes and Restore it. Then erase again.

Maybe you are looking for

  • Sharing itunes with three user accounts?

    On my mac there are three user accounts, and i want to move my itunes library from one user account to another.

  • Time Machine very slow, Safari and iTunes have to Force Quit

    Anyone else having these issues after Mavericks "upgrade"? Time Machine is so slow as to be ineffective of useless, symtoms:      - takes hours to prepare and run a backup of a couple of GB to the Time Capsule, anything up to 20 hrs!      - constantl

  • On Firefox I get The requested URL could not be retrieved On Internet explorer it works What is wrong?

    ERROR The requested URL could not be retrieved While trying to retrieve the URL: http://www.google.com.au/ The following error was encountered: * Unable to forward this request at this time. This request could not be forwarded to the origin server or

  • Potcode table report in SAP ECC 6.0

    Hi, we just upgrade our R3 systeem to SAP ECC 6.0 and with this new SAP ECC we can not find the old report for our postcode table check. In previous system, we use the following report to update our postcode table : - RSADRLSM01 - RSADRLSM02 - RSADRN

  • MTA filter support?

    Does Sun ONE offer? 1) Autoforward rules on all messages in and out? 2) Message journalling capabilites like MS Exchange? 3) Milter support like Sendmail? What I'm trying to accomplish is capturing all mail sent through the MTA. This task would need