My head feels warm & bit dizzy when using 24" LED Display

What is the level of radiation out of this thing? I'm using it with a distance about 70-90cm from the display. Anyone else experiencing the same symptoms?

Today's flatscreen monitors have a far lower level of radiation than just about any of the CRT monitors and TVs that used to be everywhere. (Early CRTs were pretty bad in this respect, even the original Apple 13-inch.) If you're experiencing health issues, it's much more likely to be related to something like eyestrain, especially because the factory-set brightness level of a typical LCD is much higher than any CRT could ever reach. Many pros dial down the brightness quite a lot so that it matches prints better.
If you still have problems, avoid speculation and see a doctor about the real cause.

Similar Messages

Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

Firefox 5 request to restart in 32-bit mode when using hotmail ... again .... :(

Not all plugins support 64 bit and if not then you need to start Firefox in 32 bit mode to use that plugin.
# Close Firefox
# Start the Finder and open the Applications folder
# Right click or control-click the Firefox.app icon
# Select "Get Info"
# Select or Deselect "Open in 32-bit mode"
# Close the "Firefox Info" window
# Restart Firefox

Hi! My imac27 fusion drive late 2013 restarts randomly when using 30" Cinema Display. What could cause this?

Hi! My imac27 fusion drive late 2013 restarts randomly when using 30" Cinema Display.
32 GB Apple RAM, Mavericks 10.9.2
I'm using power outlets that eliminitates surge fluctuations.
What could cause this? What can i do? I', a bit desperate!

Adapter: Apple Mini DisplayPort to Dual-Link DVI Adapter
I wonder what the "Fault CR2: 0xffffff80078ca4f0, Error code: 0x0000000000000000, Fault CPU: 0x0" is...
Panic log:
Anonymous UUID:       44957DF9-C5B4-5AE1-AD54-9C81A374FC95
Tue Mar 18 03:52:54 2014
panic(cpu 0 caller 0xffffff80052dbe2e): Kernel trap at 0xffffff800523404e, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff80078ca4f0, CR3: 0x000000004329d056, CR4: 0x00000000001606e0
RAX: 0xffffff838906d000, RBX: 0xffffff838905d000, RCX: 0xffffff80058ca4f8, RDX: 0x0000000000000000
RSP: 0xffffff8394cbbd60, RBP: 0xffffff8394cbbd90, RSI: 0x0000000034089b0e, RDI: 0xffffff80058874c8
R8: 0x0000000000000001, R9: 0xffffff8394cbbe90, R10: 0x0000000000000020, R11: 0x0000000000000206
R12: 0x0000000000000005, R13: 0x000006005279d2e6, R14: 0xffffff80491ceb20, R15: 0xffffff80078ca4e8
RFL: 0x0000000000010046, RIP: 0xffffff800523404e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff80078ca4f0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8394cbb9f0 : 0xffffff8005222fa9
0xffffff8394cbba70 : 0xffffff80052dbe2e
0xffffff8394cbbc40 : 0xffffff80052f3326
0xffffff8394cbbc60 : 0xffffff800523404e
0xffffff8394cbbd90 : 0xffffff8005233b17
0xffffff8394cbbdb0 : 0xffffff800524f18d
0xffffff8394cbbde0 : 0xffffff80052165da
0xffffff8394cbbe20 : 0xffffff80052163f4
0xffffff8394cbbe80 : 0xffffff8005213c1d
0xffffff8394cbbef0 : 0xffffff800521e043
0xffffff8394cbbf70 : 0xffffff80052c976d
0xffffff8394cbbfb0 : 0xffffff80052f3b46
BSD process name corresponding to current thread: Logic Pro X
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:     0x0000000005000000
Kernel text base: 0xffffff8005200000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 6598450610233
last loaded kext at 8144333788: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f874fb000, size 36864)
loaded kexts:
com.caiaq.driver.NIUSBHardwareDriver          2.6.0
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleRAID          4.0.6
com.apple.driver.AppleBluetoothMultitouch          80.14
com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleGraphicsDevicePolicy          3.4.35
com.apple.driver.AppleMikeyDriver          2.6.0f1
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.14.15
com.apple.driver.ApplePlatformEnabler          2.0.9d1
com.apple.driver.X86PlatformShim          1.0.0
com.apple.driver.AppleHDAHardwareConfigDriver          2.6.0f1
com.apple.driver.AppleHDA          2.6.0f1
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.GeForce          8.2.4
com.apple.iokit.IOBluetoothUSBDFU          4.2.3f10
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIntelHD5000Graphics          8.2.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleUSBDisplays          360.8.14
com.apple.driver.AppleMuxControl          3.4.35
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleBacklight          170.3.5
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.nvidia.NVDAStartup          8.2.4
com.apple.driver.AppleIntelFramebufferAzul          8.2.4
com.apple.driver.AppleIntelMCEReporter          104
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleThunderboltIP          1.1.2
com.apple.iokit.SCSITaskUserClient          3.6.6
com.apple.driver.AppleUSBODD          3.4.1
com.apple.driver.CoreStorageFsck          380
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.AppleUSBHub          666.4.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.5.1
com.apple.driver.AppleSDXC          1.5.2
com.apple.driver.AirPort.Brcm4360          831.21.63
com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
com.apple.driver.AppleUSBXHCI          670.4.0
com.apple.driver.AppleAHCIPort          3.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.1
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.kext.triggers          1.0
com.apple.driver.IOBluetoothHIDDriver          4.2.3f10
com.apple.driver.AppleMultitouchDriver          245.13
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.driver.DspFuncLib          2.6.0f1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAcceleratorFamily          98.14
com.apple.nvidia.driver.NVDAGK100Hal          8.2.4
com.apple.nvidia.driver.NVDAResman          8.2.4
com.apple.iokit.IOBluetoothFamily          4.2.3f10
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.iokit.IOSurface          91
com.apple.driver.AppleGraphicsControl          3.4.35
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.driver.AppleUSBAudio          2.9.5f4
com.apple.iokit.IOAudioFamily          1.9.5fc2
com.apple.kext.OSvKernDSPLib          1.14
com.apple.driver.AppleHDAController          2.6.0f1
com.apple.iokit.IOHDAFamily          2.6.0f1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.4.1
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.driver.AppleSMC          3.1.8
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.AppleGraphicsDeviceControl          3.4.35
com.apple.iokit.IOAcceleratorFamily2          98.14
com.apple.iokit.IOGraphicsFamily          2.4.1
com.apple.driver.IOPlatformPluginFamily          5.7.0d10
com.apple.driver.AppleThunderboltEDMSink          2.1.3
com.apple.driver.AppleUSBHIDKeyboard          170.15
com.apple.driver.AppleHIDKeyboard          170.15
com.apple.iokit.IOUSBHIDDriver          660.4.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
com.apple.driver.AppleUSBComposite          656.4.1
com.apple.driver.AppleThunderboltDPInAdapter          3.1.7
com.apple.driver.AppleThunderboltDPOutAdapter          3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily          3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter          1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.5
com.apple.driver.CoreStorage          380
com.apple.iokit.IOUSBUserClient          660.4.2
com.apple.driver.AppleThunderboltNHI          2.0.1
com.apple.iokit.IOThunderboltFamily          3.2.7
com.apple.iokit.IO80211Family          630.35
com.apple.iokit.IOEthernetAVBController          1.0.3b4
com.apple.driver.mDNSOffloadUserClient          1.0.1b5
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOUSBFamily          675.4.0
com.apple.iokit.IOAHCIFamily          2.6.5
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          23
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.9
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1

HT201177 no audio when using a mini display port to HDMI cable to TV on my Macbook pro

no audio when using a mini display port to HDMI cable to TV on my Macbook pro. can only see the video

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

HT1551 When using Airplay, the display on my tv isn't being fully used (its not taking up the full widescreen tv display). How do I fix that issue?

When using Airplay, the display on my tv isn't being fully used (its not taking up the full widescreen tv display). How do I fix that issue?

Intermittent issues will point to a local network/wifi issue.
Reboot ATV and router, make sure both are up to date
Try ethernet
The home sharing connection will cut out if the iMac goes to sleep.

Strange feeling in my hand when using the power-book

I have noticed I get an odd sensation in my right hand when using my 17" powerbook, say after about half an hours use. Is there some sort of electrical/magnetic field which could be causing this? I have also noticed it in my legs when I had the power-book resting on my legs. I now only use my powerbook with a seperate keyboard & mouse so I do not get the strange slightly warm ache in my right hand. Anyone else notice anything like this? Any ideas what it is? It is not something from repetitive typing etc because it does not occur when I am using the seperate keyboard.

I have noticed I get an odd sensation in my right
hand when using my 17" powerbook, say after about
half an hours use. Is there some sort of
electrical/magnetic field which could be causing
this? I have also noticed it in my legs when I had
the power-book resting on my legs. I now only use my
powerbook with a seperate keyboard & mouse so I do
not get the strange slightly warm ache in my right
hand. Anyone else notice anything like this? Any
ideas what it is? It is not something from repetitive
typing etc because it does not occur when I am using
the seperate keyboard.
I have frequently noticed that if I run my fingers over the case, even when the powerbook is closed, I get this funny sort vibration in my fingertips. Whenever it happens, I do it several times to try to figure out what it is. So far, I don't have a clue. I thought it might be the disk drive, but I don't think that any more for some reason.
Whatever it is, there is a there there.
G3 Tower Mac OS X (10.4.6) Turqoise

I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in uk

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

[iPhone] Problem when use UIAlertView to display 3 button

I use UIAlertView to display message and have 3 button : Yes/No/Cancel
But 3 button always display on 3 rows. It's very bad and overlap on message.
I want display 3 buttons on a row. Please help me.
(If I only use 2 button then its display on a row)

Dear All,
Thank you for your helpful ideas.
After so many tests, I solved the issue.
This issue is caused as the servername contain underscore "_", when my colleague installed the BOE system and he named the server into like "boe31_sql2008", after i changed the server name into "sophie" or "boe31sql2008", it works fine.
So i tried to rename the server into another name contain "_" like sophie_test, and the system prompt a winodw and waring me:
Do you want to use this non-standard computer name? The computer name "sophie_test" contains one or more non-standard characters. .. non-standard name will prevent other uses from finding your computer on the network, unless your network is using the Microsoft DNS server).
But the strange thing is why firefox can know it well. And even we maintained the servername and it's ip in host file, it still meet the problem, so i'm not sure whether this is a bug.
Thanks,
Sophie

Question when using the Mini Display Port.

Hello,
I just got my 27" Imac, and I was wondering what is the hotkey to switch between the mini display port and the normal desktop?
Am using a Mini Display to DVI adapter and I can't figure out how to switch between the video sources. Am trying to run my Ps3 off from my mac, any help on what the hotkey is would be wonderful.
I read some place that command+F2 is the hotkey used to switch between the port, but maybe you have to assign the hotkeys?
There have been people who have been able to use there systems this way, and Apple states the port is there for this purpose; Any light on this subject would be nice.

Welcome to the Apple Discussions!
You can only run your PS3 on the iMac's display if you have an adapter that turns the PS3's video signal into DisplayPort signaling. A mini-DisplayPort to DVI adapter is the wrong adapter to use. That adapter works in only one direction, from a device with m-DP output to a device with DVI input.
If your PS3 has DVI output then you need an adapter to convert the DVI to HDMI. Then you need a converter to convert the HDMI to m-DP. They run US$149.00. The best resolution that you can expect is 720p.
http://www.kanexlive.com/products/kanexXD.aspx
Then you can toggle using Command+F2.
Dah•veed

Using the LED display as a heater!

Hello,
I'm living in a student dorm in UK and it's pretty cold in the night.
My central heater is not always turning on and I always have a trouble complaining to the accommodation office.
Now I have a 24" LED cinema display and my problem is gone. I can feel strong background heat in my room after having the display turned on about 1 hour.
So it's a buy-1-get-1-free: Display and a room heater in one prize. Cool, isn't it? (Well, I mean, hot...)
Back to serious thing. I would like to know if it is a normal for a LED display. Since I never had a display before, only had a laptop.
I touched everywhere of the screen, back and front, and feel the same heat dispersed all over its body. There is especially heat coming out from the bottom mesh, where I always put a cup of tea there and keep it warm.
Overall, no problem for me, but I don't know if it will cause any damage to the display in the long run. I have no AppleCare for this display because I did not purchase the same time as my laptop, and purchase a new protection plan is expensive though.

Mine gets very warm also. Remember the power source is now inside of the display. Its vented at the bottom, and helps to keep my hands warm while typing. But its perfectly normal. If you check the LED displays at the Apple stores, they too generate a lot of heat. Even my 40" Sony XBR LCD TV gets warm, so I think that is normal.

Dashboard and window sizes when connecting to LED display

Hello,
I just bought the LED display yesterday...gotta say thats its beautiful....i have one problem though....when i connected it to my macbook all the window sizes (e.g safari, itunes, dashboard) were too small....I tried modifying them...but now when i disconnect the display the window sizes on the macbook are too big and out of display....the resolution on the laptop is 1280X800 and on the screen its 1920X1200
any way to fix this?
Thanks

My experience is that if you are connected to the larger display and then disconnect without restarting, then you will see the behaviour you are describing.
If you restart the machine after disconnecting, the MB is smart enough to make everything fit within the native (and only available) resolution.
Good luck!

Run in 64-bit mode when using 32 bit plug-ins?

I have noticed that when I open a project that uses Komplete 7 Elements, a 32-bit bridge utility loads and an error message indicating that the file could not be opened pops up. However, the file project does open. My question is this: Does using 32-bit plug-ins affect performance when Logic runs in 64-bit mode?

Hi,
Based on the error message, we should confirm whether Oracle client tool has been installed on the Report Server at the beginning. If the Report Server installed is 64-bit, we should also install a 64-bit Oracle client tool on the Report Server. Besides, we
can also try to bypass tnsnames.ora file when connecting to Oracle by specifying all the information in the data source instead of using the TNS alias to connect
to the Oracle database. Please see the sample below:
Data Source=(DESCRIPTION=(CID=GTU_APP)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST= server01.mydomain.com)(PORT=1521)))(CONNECT_DATA=(SID=OracleDB)(SERVER=DEDICATED)));
Reference:http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/06/30/ora-12154-tns-could-not-resolve-the-connect-identifier-specified-error-while-creating-a-linked-server-to-oracle.aspx
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Add header line to excel sheet when using FM RH_START_EXCEL_WITH_DATA

Hi
I'm using FM RH_START_EXCEL_WITH_DATA to download an internal table to EXCEL. But when excel is started it's without a header line.
What I would like to do, is to take the field-names/field-text from the abap dictionary, and use them as the header line. How do I achieve this ?
Regards
Morten Nielsen

Hi ,
See this sample code.
Tables : zacg_cca,zacg_exsh.
data: P_file like RLGRAP-FILENAME.
Data: Begin of it_header occurs 0,
 Header(15) ,
 end of it_header.
Data : begin of it_final occurs 0,
 ccode type zacg_cca-ccode,
 mat_cd type zacg_cca-mat_cd,
 ingr_desc type zacg_cca-ingr_desc,
 conc type zacg_cca-conc,
 quantity type zacg_cca-quantity,
 percqty type zacg_cca-percqty,
 flag ,
 APP_DATE type zacg_cca-app_date,
 rsamnos type zacg_cca-rsamnos,
 end of it_final.
 SELECTION-SCREEN : BEGIN OF BLOCK blk WITH FRAME TITLE text-000.
 select-options : s_Date for zacg_cca-app_date.
 SELECTION-SCREEN : END OF BLOCK blk.
 it_header-Header = 'Samp_code'.
 Append it_header.
 it_header-Header = 'Mat_code'.
 Append it_header.
 it_header-Header = 'Ingr_Desc'.
 Append it_header.
 it_header-Header = 'Conc'.
 Append it_header.
 it_header-Header = 'Quan'.
 Append it_header.
 it_header-Header = 'Perc'.
 Append it_header.
 it_header-Header = 'Flag'.
 Append it_header.
 it_header-Header = 'Date'.
 Append it_header.
 it_header-Header = 'Rsamnos'.
 Append it_header.
 it_header-Header = 'Mat_code'.
 Append it_header.
 select ccode
 mat_cd
 ingr_desc
 conc
 quantity
 percqty
 app_date
 rsamnos
 from zacg_cca into corresponding
 fields of table
 it_final where zacg_cca~app_date in s_date.
 loop at it_final.
 it_final-flag = 'T'.
 modify it_final.
 it_final-quantity = it_final-quantity * 2 .
 Modify it_final.
 endloop.
 CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
 EXPORTING
 FILE_NAME = 'E:\IT\P_FILE'
 CREATE_PIVOT = 0
 DATA_SHEET_NAME = ' '
 PIVOT_SHEET_NAME = ' '
 PASSWORD = ' '
 PASSWORD_OPTION = 0
 TABLES
 PIVOT_FIELD_TAB =
 DATA_TAB = it_final[]
 FIELDNAMES = it_header[]
 EXCEPTIONS
 FILE_NOT_EXIST = 1
 FILENAME_EXPECTED = 2
 COMMUNICATION_ERROR = 3
 OLE_OBJECT_METHOD_ERROR = 4
 OLE_OBJECT_PROPERTY_ERROR = 5
 INVALID_PIVOT_FIELDS = 6
 DOWNLOAD_PROBLEM = 7
 OTHERS = 8
 IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
Regards
ABG

Configuring web.xml when using JSP as display technology

Hi,
I have a very simple HelloWorld style jsp.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<f:view>
<html>
 <head>
 <title>
 JSF in Action - Hello, world!
 </title>
 </head>
 <body>
 <h:form id="welcomeForm">
 <h:outputText id="welcomeOutput" value="Welcome to JavaServer Faces!"
 style="font-family: Arial, sans-serif; font-size: 24; color: green;"/>
 
 <h:message id="errors" for="helloInput" style="color: red"/>
 
 
 <h:outputLabel for="helloInput">
 <h:outputText id="helloInputLabel"
 value="Enter number of controls to display:"/>
 </h:outputLabel>
 <h:inputText id="helloInput" value="#{helloBean.numControls}"
 required="true">
 <f:validateLongRange minimum="1" maximum="500"/>
 </h:inputText>
 
 
 <h:panelGrid id="controlPanel" binding="#{helloBean.controlPanel}"
 columns="20" border="1" cellspacing="0"/>
 
 <h:commandButton id="redisplayCommand" type="submit" value="Redisplay"
 actionListener="#{helloBean.addControls}"/>
 <h:commandButton id="goodbyeCommand" type="submit" value="Goodbye"
 action="#{helloBean.goodbye}" immediate="true"/>
 </h:form>
 </body>
</html>
</f:view>To get this working I had to use the following web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
<display-name>JSFHelloWorld3</display-name>
<welcome-file-list>
 <welcome-file>index.html</welcome-file>
 <welcome-file>index.htm</welcome-file>
 <welcome-file>index.jsp</welcome-file>
 <welcome-file>default.html</welcome-file>
 <welcome-file>default.htm</welcome-file>
 <welcome-file>default.jsp</welcome-file>
</welcome-file-list>
<servlet>
 <servlet-name>Faces Servlet</servlet-name>
 <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
 <load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
 <servlet-name>Faces Servlet</servlet-name>
 <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<context-param>
 <description>State saving method: 'client' or 'server' (=default). See JSF Specification 2.5.2</description>
 <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
 <param-value>client</param-value>
</context-param>
<context-param>
 <param-name>javax.servlet.jsp.jstl.fmt.localizationContext</param-name>
 <param-value>resources.application</param-value>
</context-param>
<listener>
 <listener-class>com.sun.faces.config.ConfigureListener</listener-class>
</listener>
<servlet-mapping>
 <servlet-name>Faces Servlet</servlet-name>
 <url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<servlet-mapping>
 <servlet-name>Faces Servlet</servlet-name>
 <url-pattern>*.faces</url-pattern>
</servlet-mapping>
</web-app>When I go to:
http://localhost:8080/MyApp/hello.jsp
I get:
org.apache.jasper.JasperException: An exception occurred processing JSP page /hello.jsp at line 23
20: <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
21: <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
22:
23: <f:view>
24: <html>
25: <head>
26: <title>
Stacktrace:
 org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
 org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:419)
 org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313)
 org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260)
 javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
root cause
java.lang.RuntimeException: Cannot find FacesContext
 javax.faces.webapp.UIComponentClassicTagBase.getFacesContext(UIComponentClassicTagBase.java:1855)
 javax.faces.webapp.UIComponentClassicTagBase.setJspId(UIComponentClassicTagBase.java:1672)
 org.apache.jsp.hello_jsp._jspx_meth_f_005fview_005f0(hello_jsp.java:119)But when I go to:
http://localhost:8080/MyApp/hello.faces
Everything is ok?
I am confused why?
Any help appreciated.

I believe this is a url pattern issue. You have one for *.jsf as opposed to *.jsp.
<url-pattern>*.jsf</url-pattern>
This likely any pattern containing "faces".
<url-pattern>/faces/*</url-pattern>
Add one for *.jsp and you should be OK.

Function module when used should not display ALV

Hi ,
All ABAP Gurus
I want to use a function module WS_DELIVERY_MONITOR which should give the VBELN on the basis of CHARG in internal table so that on the basis of VBELN I can fulfil further requirement and display the final output in ALV.
But this function module when executed display an ALV.
My requirement is that it should retrieve all the VBELN on the basis of CHARG (which is in the internal table and is passed to the function module) in an internal table and do not display the ALV so that when all the VBELN come in internal table then I can perform further calculation.
Please guide me in this matter.
Thanks & Regards
Bharti Jain

Hi Bharti,
Please try calling FM 'WS_LM_DATA_SELECTION' instead. This FM is callled inside main FM 'WS_DELIVERY_MONITOR' and is used to fetch data. You will only need to fill extra import parameter for using this FM ( if_flag_inbound) and two changing tables (lt_postab) and ( lt_postab_kodat), which will have results. 'if_flag_inbound' field will be having value X for all inbound cases.
I have used the same FM to get open deliveries:
CALL FUNCTION 'WS_LM_DATA_SELECTION'
 EXPORTING
 if_proctype = c_proc_type_f
 TABLES
 it_matnr = i_deliv_matnr
 it_lgort = i_deliv_lgort
 it_lfart = i_deliv_type
 it_kostk = i_deliv_kostk
 it_wbstk = i_deliv_wbstk
 ct_postab = i_deliv_nos
 CT_POSTAB_KODAT =
 EXCEPTIONS
 no_data_found = 1
 wrong_proc_type = 2
 OTHERS = 3 .
IF sy-subrc = 0.
**-Calculate open delivery quantity
 LOOP AT i_deliv_nos INTO wa_deliv_nos
 WHERE NOT posnr IS INITIAL.
 pc_open_deliv_qty = pc_open_deliv_qty + wa_deliv_nos-lfimg.
 ENDLOOP.
ENDIF.
<removed by moderator>
Edited by: Thomas Zloch on Sep 7, 2010 9:06 AM - please do not ask for ...

My head feels warm & bit dizzy when using 24" LED Display

Similar Messages

Maybe you are looking for