My headphone are not functioning correct

Ok, recently i just found this forum and im glad to post my problem here. I am using SB Li've! 4., everything is working fine except my headphones. It's like only my Right side is working and my left side is not working when i plugged the plug into the GREEN output. I am using it for gaming and since only right side is working it really affect my game play and i have been changing from Surround speakers to Stereo Headphones but still only RIGHT side is working and left side is not working at all, i tried with my ear piece yet, only my right side is working and left side is not working. But if i pushed a little hard on my HEADPHONE's plug sometimes both side is working fine and if i let go of my finger it becomes right side working and left side not working. So what is the problem? My headphone and ear piece are new, yet both got same problems. Please help me.
Silver279

I did use on other devices, the only one i used on is my computer. Is it something wrong with my soundcard, settings or what? I had the latest drivers, and some upgrading softwares on it and also i changed every settings I could see on the Sound settings and tested with different outputs and they are not even working at all. The only solution is sometimes i pressed very hard on the plug it only work awhile but then no more if i let go of it. I bought a new headphone a few hours ago and its the same still, and I go to Sound settings and change from Surround speakers to Stereo Headphones and then to Surround speakers and to Stereo Headphones again and again like 20-30 times repeatly and it worked fine. But after i rebooted my PC it became the same, One side can be heard and the other side is not functioning at all, I might need to switch repeatly again in Settings to make it work again.. so.. its really annoying and after sometime my headphone maybe will get affected by mass-mass-switching.. please help me thanks !

Similar Messages

I just to a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

I just bought a new iphone5s, the headphones are not working correctly. I can hear the music but I can't pause or play with the button. Will apple replace them?

Hi there,
It sounds like your purchased content is not transfering via a flash drive. It may be easier to re-download this contnet directly from iTunes. Take a look at the article below for mor information.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W.

Hyperlinks Are Not Functioning Correctly

I have a problem with the some of the hyperlinks in my
WebHelp Pro project not functioning correctly once the project is
compiled. What happens is that when I click on a hyperlink the text
doesn't change from blue to purple. Not all the hyperlinks on a
page are affected; some may work while others do not.
When I look at the HTML code, I see two different things
happening, and both things may not occur in the same code:
1) In some documents the code reads "a visited=0000ff." The
value should be 800080.
2) In other documents "font color=blue" is being added to the
HTML code for a particular hyperlink. Other hyperlink code in the
same document may be unaffected.
I have checked the font color in the editor to make sure it
was set to "automatic" before I created the hyperlink. I removed
the hyperlinks altogether, recompiled, then opened the document
back up and recreated the hyperlinks. The problem still exists.
Every document in my project is using the default.css style sheet.
I use the same paragraph style throughout the project, both on the
links that work correctly and those that do not.
Has anyone ever experienced this problem? And if so, do you
know the fix? I could manually edit the HTML code before publishing
my project, but that is just a bandaid fix.

The hyperlink color is controlled by the style sheet. I edit
my style sheets in a text editor. Make sure you clear your browser
history before testing the color changes.
FWIW, I like my links to stay blue--I usually have the color
change to purple in hover just to indicate that what is moused is
indeed a viable link.

I believe my firefox is viewing some websites on my laptop in formats that are used for cellular devices. Sites like facebook, sports illustrated, yahoo are not functioning correctly but certain sites work fine.

sits such as facebook, yahoo, and sports illustrated do not function correctly on firefox but they do on my internet explorer. I believes its somehow set itself into the same format used for cellular devices... My JSU.edu page says somethin about it being in (portal mode). It is also a different format now that normal.

Hi @TheBigGiggle ,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY TouchSmart 17 Notebook PC and a keys not functioning correctly. Here is a document on cleaning the keyboard.
I would start with air on the keys as sometimes debris can cause this issue.
Here is a link to uninstall the keyboard. In the device manager have you uninstall all that is listed in keyboards, restart the computer after uninstalling, it should reinstall automatically and resolve any issues with the keyboard.
Here is a link to keyboard troubleshooting.
Here is a fix from Microsoft that might help.
Let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Widgets not functioning correctly on tablet layout

I've noticed that my new ipad is showing my tablet layout of muse website, but some of the widgets are not functioning correctly. I have tried a few widgets for the tablet layout and it has resulted in problems.
Please take a look at www.littlesouth.com for an example of the current error.

Hi
I tried to check the site in tablet and it works fine.
Can you please elaborate as which specific widgets are not working ? and are they on home page or any particular page within the site.
Thanks,
Sanjit

Function keys are not working correctly

I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

Headphone jack not functioning

Anyone had issues with the headphone jack on a gen4 iPad that stops working? Any resolution?

Hey there,
It sounds like the headphone conenction is not functioning correctly. I would use the troubleshooting in the following article named:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Thank you for using Apple Support Communities.
Regards,
Sterling

My headphones are not clicking into my ipod touch 4g 64gb port, and are causing it to pop out at the smallest movement, how can i fix it?

basically it's been a problem for a while now my sennheiser headphones are not clicking in correctly and are popping out at every movement causing it to pause my music, (very annoying) but it works fine if i hold it in, but can't do this all the time.I dom't know what the problem is or how i can fix.
any help would be greatly recieved
regards
PD

If it happens with another set of headphones then the headphone jack in the iPod needs replacing. Apple will only exchange your iPod for a refurbished one for this price:
Apple - Support - iPod - Repair pricing
A third-party place like this one is less expensive. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Internal speakers and headphones are not working

I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

Hi,
It could be either Hardware or Software related, so try the following and let me know.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Spry Menu Issues - Not functioning correctly in Microsoft IE

Hi there,
I am fairly new to web design and dreamweaver.
I have constructed a simple page that I am happy with complete with Spry Menu which again I am happy with. However this spry menu works perfectly in firefox but for some reason on IE my spry menu does not function correctly and goes all over my page!
CORRECT VERTICAL MENU - FIREFOX -
INCORRECT MENU FUNCTION! - IE -
See my CSS Code below for the spry menu in questions - if this helps -
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: inherit;
    font-size: 100%;
    cursor: default;
    width: 1000px;
    height: 47px;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: medium;
    position: relative;
    text-align: center;
    cursor: pointer;
    width: 318px;
    float: left;
    height: auto;
    background-color: #000000;
    border: 2px solid #FFF;
    font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: auto;
    cursor: default;
    width: auto;
    position: absolute;
    left: -1000em;
    font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 318px;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin-top: -5%;
    margin-right: 0;
    margin-bottom: 0;
    margin-left: 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0px;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #FFFFFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    background-color: #bcbdb9;
    padding: 0.5em 0.75em;
    color: #FFF;
    text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    background-color: #000;
    color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #000;
    color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarDown.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inherit;
    f\loat: left;
    background: #FFF;
** I am also using Windows 8 and Dreamweaver CS6 If this helps.**
Any help with this would be fantastic as I need this to be resolved before the end of the week.
Any further information required please message me to find out.
Thanks,
Jamie

THE CONFLICT IS BETWEEN YOUR DOCUMENT CSS AND THE SPRY CSS.
It is because the <li> and <a> TAGS have been styled and therefore OVERRIDDEN THE SPRY CSS.
Use CLASS TAGS e.g. <li class="anyclass"> and <a class="anyclass">
and STOP USING THE <a> TAGS.
N.b. you may need to unstyle any <a> or other TAGS that conflict with the SPRY CSS. (However it's best to start over knowing that styling basic tags may affect the SPRY CSS).

ICal not functioning correctly

First of all, I have been using Entourage which I sync with iCal so that I can sync my calendar with my iPhone. I would like to discontinue using Entourage but for some reason, iCal is not functioning correctly. First, the calendars do not appear in the left hand window and I cannot seem to figure out how to get them to appear.
Second, when iCal opens off of the dock, there is nothing showing on the calendar at all. When I change the view (i.e., month, to week) then all of my scheduled events appear. When I go back to the original view, everything appears. When I attempt to sync with MobileMe, I get a message at the website that "a script is not responding." I don't know whether the two are related or not.
Any help?????

I have the same problems. Also, I can't enter a "multi day' event, the system tells me there is a fault and it cannot synch. I was automatically updated to MobileMe, but the system isn't performing as promised.

Touchpad not functioning correctly

I have an Envy 17,(Windows 7) and the touch pad is not functioning correctly. I have had it do similar things in the past but they seemed to fix themselves after a few minutes, but this time it just keeps messing up. I CAN click on programs to open them but once in a program, I cannot click on anything. I CAN click on links when online, but they always open in a new tab and when I attempt to click on a new tab, the tab completely closes out. Once a program is opened, I cannot close/minimize/maximize it using the touchpad, nor can I access File/Edit/other menu options. I also cannot click in a typing field. (I'm using a different computer to do this post)I can barely move the curser around. It jumps or freezes up. I move it up about an inch and as soon as I take my finger off the touchpad the curser goes back to where it originally was. I've tried restarting the computer but that hasn't worked. I've attempted tried some other things as well, but since I cannot click on anything with the touchpad and can barely move the curser, I am at a loss for what to even try. Everything was working fine this morning. I literally got up from the computer, made breakfast and sat back down and it was all glitched up. No one had touched it... I had not recently downloaded anything nor have I made any updates to the computer. Thank you, Neyephe

Hello there, It sounds like there is a hardware issue with your touchpad, which you need to replace. As stated in the warranty, the touchpad may only be replaced by an Authorized Service Provider. If you cannot find any places that are authorized, you may contact the HP Support Center via phone and arrange a date for your touchpad to be replaced. In the meantime, you can buy a USB mouse to navigate your laptop. Best wishes getting your issue fixed! Best Regards,Shawn

N96 Telephone Service Not Functioning Correctly

Good evening folks,
Now, I've had this problem for as long as I've had an N96. TWO N96's in fact, as my first was replaced by Nokia due to the screen-slide connection malfunctioning. Both have been fully firmware updated and restored on multiple occasions in an attempt to fix the problem.
The telephone service on the handset has the habit of not functioning correctly, like the service has hanged or just doesn't respond.
For example, I find a contacts name in contacts, press the green key to show their contact numbers, and green again on the number I wish to call- nothing happens, other than the available numbers disappear and you return to the regular contacts view. This is what would normally happen anyway, only you'd have an outgoing call happening over it and showing the "telephone" screen.
Or, example two, in a text message I chose Options > Call > Voice Call and press the select or middle button to initiate the call- No call, instead the options dialogue disappears and I return to the standard message view. Again, I should be in an outgoing call, not viewing my text message.
Example three, to really show the telephone service isn't working;
I'm in full signal, text messages are functioning correctly and the mobile web is working flawlessly. A friend sat next to me rings me and is immediately directed to my voicemail, not a single indication from the handset that I may have been receiving a call.
Seconds later I receive a text message from my operator to let me know about a new voicemail my friend just left me.
So, the telephone service isn't functioning as it should be.
A quick restart fixes the problem in 4 out of 5 cases, however usually within 24 hours the problem is persisting again.
Not being able to make outgoing calls isn't a problem, because at least then I know the telephone service has failed on me and I can restart.
A potentially important incoming call about anything being directed immediately to my voicemail? Problematic, especially if they don't leave a message and instead just keep trying me, as I receive no notification from my operator about missed calls and there is no way other than to try and make an outgoing call as to determine whether the service is still functioning.
It isn't shown as a regular application whilst not in a call and I don't believe I should even have to check if it's still running as this function is the main function implied in the device category 'smartphone'.
Rant over, so if there's anyone out there who could shed some light onto this situation, please do.
Also, kind of off topic- but in the case that this is a universal problem (which I'm assuming it is, having had two completely different handsets with the same symptoms), do I go after Nokia to provide me with a different model of handset, or the supplier (The Carphone Warehouse) since my handset isn't properly providing a function that is advertised?
Somehow I presume I'm rightfully entitled to a reimbursement or different model. Hopefully.
Thanks in advance people

You're so right.... I managed to get over the problems, never upgraded the firmware... Once I got all the apps I use and needed, never touched it.... Still the phone is a mess, worst ever... I came from an Iphone, fleeing from lock OS and stuff, and found myself in a Symbian hell..... Definitely Windows Mobile... I'm so down on this phone, I spent 650 dollars, one year ago.... The worst investment ever... Never again a Nokia or a Symbian smartphone, for cheap ones apparently are the best. I'll wait another year, to feel less pain when buying a new one for 600-1000 dollars.
Solution: Buy another phone... Better if it is a Windows Mobile.... As HTC for example.
Regards,

Parental Controls are not working correctly. Websites I've listed under Allow Access are still blocked. How can I fix this?

Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?

Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly

My headphone are not functioning correct

Similar Messages

Maybe you are looking for