My headphone jack isn't working.

Whenever I plug in my headphones or the auxilary cable, it does not work. How can I fix this?
It works when I connect the usb cable to the car, I can still hear music when I plug it in through the usb cable. I've tried using two separate auxilary cables, two different cars and my headphones and that part of the iPod is still not working.

1. Reset PRAM.  http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
3. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Plug in the headphone.
     Unmute if it is muted. Adjust the volume if you can.

Similar Messages

  • My iPod's headphone jack isn't working anymore, when i put my headphones in , the left l, My iPod's headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

    My iPod nano 3rd generation headphone jack isn't working anymore, when i put my headphones in , the left earphone doesn't work. Does anyone know if this can be fixed ?

    Hi Mr.Acevedo329!
    I have an article here for you that can help you troubleshoot the issues you are experiencing. That article can be found right here:
    iPod troubleshooting basics and service FAQ
    http://support.apple.com/kb/ts1382
    Specifically, you will want to take note of this section:
    The headphones don't work
    If your iPod's headphones don't work or have static or garbled audio, try connecting them to any other 3.5 mm stereo headphone jack, like the one on your computer. If the issue with the headphones persists, replace them. For an iPod under warranty, you can order a replacement online. Otherwise, check out the cool headphones at the Apple Online Store. If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Do i have to send my iPod in if the headphone jack isn't working?

    do i have to send my iPod in if the headphone jack isn't working?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • The headphone jack isn't working

    the headphone jack isn't working...it's will work out of one side...lots of static

    The headphone jacks on the iPod sometimes go bad/wear out.  If within warranty, get Apple to replace the iPod. If not under warranty Apple will sell you a refurbished iPod for the following.  You turn in your damaged iPod.
    Apple - Support - iPod - Repair pricing
    There are third-party places that will replace it for less.  Yu can even try yourself:
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    DigiExpress.us - The iPad Repair Professionals
    3rd Gen iPod touch Repair
    iPod Touch Repair

  • No microphone jack and my headphone jack isn't working. N858

    I just got a Lenovo N585, and I've got to say it's one confusing laptop, at least for me. Well I tried plugging in my headphones into the head phone jack, and its works externally, but there is no sound coming out of my head phones. I am wondering if theres some program I have to run to make it work correctly. Also why is there not a microphone jack?

    Hi Awkwardness2,
    Thanks for posting and Welcome to Lenovo Community,
    the machine has combo audio jack ,which is 1 socket for the speakers and the microphone
    you need to buy a new headphone with combo audio jack or get an adapter to fix this issue
    let me know if that fix the issue or not
    Regards,
    Ayman

  • IPod Touch Headphone Jack Isn't Working?

    I own the original iPod Touch, I have had it for about 9 months, and out of nowhere the other day, I plugged my headphones in to listen, and I could only hear some of the instruments, and no vocals. At first I thought it was my headphones, but then I tried several other pairs, and none of them worked either. However, when I plugged it into an iPod Docking Station through the connector (not the headphone jack) it worked fine, so I know it's a problem with my iPod's headphone jack.
    Any suggestions on how I could fix this?
    Message was edited by: Flimboe

    If you bought it new only 9 months ago, which I think would be a little difficult, you can send it in to Apple or take it to an Apple Store (make a Genius Bar appointment first) and get it serviced under warranty. If it is out of warranty you can try a 3rd party repair site such as http://www.iresq.com or use Google to find other such sites. If you are the DIY type try http://www.ifixit.com and look at the pictures/videos on how to disassemble the iPod and replace the headphone jack.

  • Nomad Zen 20g - Headphone jack isn't work

    Does anyone know where and/or how I could get the headphone jack on my Zen fixed? I love the player but need to keep jiggling the headphone jack to hear the music. Thanks!

    Unfortunately this is a design flaw on many of the older model ZEN jukebox players. The contacts on the circuit board where the headphone jack connects come loose and cause the headphone jack to separate from the board. The only way to fix it is with a careful re-solder job, that is, if you don't want to send it back to Creative for an expensive repair job.
    Here's a really good step-by-step article complete with pictures showing how to reaffix the headphone port to the board:
    http://www.pcpages.com/thebishop/nomadfix/

  • Help! My Ipod Video Headphone Jack isn't working!

    Hey guys. My Ipod video has starting messing up in the jack so that it doesn't play right in the right ear regardless of what headphones I use. Is this a common problem and any idea how to fix it or how much it costs to fix it and where I go?

    The best place to go is an Apple store ,if it is under warranty will no fees.
    If do not have an Apple store close to you, go to an authorized dealer.
    I think its a minor issue may be the jack connector
    good luck

  • My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix?

    My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix? Ive tried reseting my computer and that didnt work

    Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
    https://www.youtube.com/watch?v=gLbasVD69xo

  • Headphone jack no longer working since 8.2 update

    so I did the update from 8.1 to 8.2 the other night, since the update the headphone jack no longer works, I have some choppy scratchy and unrecognizable sounds on occasions.. Has anyone else had this issue? Bad thing is I did the update, auto backed up and can no longer  backup to 8.1 or earlier versions... Any ideas?

    Hi Dj2loud,
    I understnad you are having sound quality issues when using the headphone jack on your iPhone.  Try the steps below to troubleshoot the issue.
    If your headset isn't working - Apple Support
    https://support.apple.com/en-us/HT203026
    Regards,
    Judy

  • My iPad 1 headphone jack don't work anymore.HELP!!!

    My IPad headphone jack don't work anymore. I have tested it with three headphones.Sorry I'm german and my englisch isn't the best.

    Moo97-
    If your iPad is still under warrantee, contact Apple for advice on how to get it repaired or replaced.
    If your iPad is no longer covered by the warrantee, search the web for iPad Repair.  There is probably an iPad repair center near you.
    Fred

  • T420 Headphone Jack won't work in Windows 7

    Hi all,
            I've recently got a T420 4180A32 (Conexant CX20672) and the headphone jack doesn't work under Windows 7. It works when I boot (natively) into Ubuntu, but obviously when I run a Virtual Machine into Ubuntu through Windows, it doesn't work either.
    I have:
    - Uninstalled and reinstalled the driver version that came installed.
    - Installed,  Uninstalled and reinstalled a newer driver version.
    - Uninstalled the old driver and installed the new one.
    - Reverted to using the generic High Definition Audio driver. The speakers work fine but again, headphone jack doesn't.
    - Established that it obviously isn't a hardware problem.
    - Uninstalled then reinstalled DirectX
    - Tried various headphones on the off chance that they were the problem. They weren't.
    I haven't:
    - Done a full reinstall of windows 7 (although I might)
    - Tried Windows 8, although again, I might as I have an unused licence for it and I really want my headphones to work.
    That's about all the info I can give. Besides this problem, the laptop runs great!
    Any help would be appreciated.
    Thanks

    I have now noticed that when using ubuntu the headphones work but that won't mute the speakers, so I am starting to think it could actually be the jack, as the headphones, as a device, arent dectected by ubuntu either, they just work because they are plugged in, I guess it's the way each OS works.
    Check if that happens in your computer as well. Also, where did you check the prices of compatible sound cards? Which should I buy? I may go to a Lenovo store to get it fixed.

  • Headphone Jack No Longer Works

    Does anyone know of headphones that may plug into the bottom outlet of the iPod, where it connects usually to stereo equipment. My iPod still works with this connection, to charge it, to listen on my computer, on my stereo but the headphone jack no longer works so I can't use it in my car or at other times.

    Ok I just talked to headroom and with this adapter you can go directly to a set of headphones or to one of their amps. Additionally the pin connector provides improved sound quality over the cheap headphone jack that comes stock on the ipod.
    http://tinyurl.com/272myv

  • Headphone Jack No Longer Working

    About 2 weeks ago, my iPhone's headphone jack completely stopped working. I started to notice it a month ago (after installing the latest iOS builds, but I dont necessarily have any reason to believe that it's a software issue) when it wouldn't play music in the headphones when I'd plug them in but after trying a few more times it would finally work again. Obviously now it doesn't work at all.
    I've read the few threads around the Internet on this issue and most people just had lint in the jack that had to be cleaned out. Mine did not but I tried cleaning it anyway with a q-tip and also light oiled it with electronic lube (with a q-tip, being mindful of the sensor at the base of the jack).
    Has anyone else been able to fix this type of problem?

    SOLUTION: Headphones no longer work on iPad
    I had the same problem: suddenly my headphones didn't workon my iPad. All the headphones (3 pairs) worked on my iPhone, so I knew the problem wasn’t with the headphones. The sound worked fine from the iPad speakers, so when I unplugged the headphones, the sound returned. I called AppleCare Support and tried everything they suggested, including restoring it to the factory settings. Nothing worked, and they authorized a replacement iPad.
    The new iPad arrived, but it had the same problem, so I knew something had changed in the iPad's programming. I went online and found that many others were having the same problem, but no one offered a solution. However, someone mentioned that the problem first occurred after installing the latestOS (4.3.3), which is when my iPad’s problem occurred. Next, someone else wanted to know if there was a mute switch that needed to be turned off. This started me thinking...
    To make a long story as short as possible, I played around with the controls on my old iPad and discovered the following: Apparently, the latest OS has added a safety feature to protect our eardrums (that’s nice, but it would be even nicer to have been notified of this change .. even the support technicians were unaware of it). Previously, when you listened to the audio through the iPad’s speakers, the sound was so low that you had to turn the volume up as high as possible to hear it. Then when you plugged in the headphones, the sound blasted your eardrums as you frantically lowered thevolume.
    (PROBLEM:)
    Now, however, WHEN YOU PLUG IN THE HEADPHONES, THE IPAD AUTOMATICALLY MUTES THE SOUND. When you unplug the headphones, the sound is automatically restored through the speakers, giving you the false impression that there is something wrong with the headphones or the headphone jack.
    (SOLUTION:)
    So after plugging in the headphones, you have to use the volume button to bring the sound back up to the desired level. When you press the volume button, it will say “headphones” on the display to let you know that you are adjusting the sound for the headphones only. The speaker volume retains its previous setting (maximum volume).
    So, the solution is quite simple… just turn up the volume after you attach the headphones.
    Cheers!
    Becky Bear

  • Buttons (silent, volume, on/off) and headphone jack no longer working!

    All of a sudden my iPhone stopped working - that is, none of the buttons work except the round one below the screen. None around the sides work any more and the headphones jack doesn't work either. I have the latest os/firmware (3.1). This happened totally out of the blue. I know of nothing special that could have caused it. Just happened one day when I tried to use headphones and noticed the volume kept sounding through my speakers rather than the phones. And then I noticed the silent didn't work, the volume up/down button on the side didn't work, etc.
    I can not turn my phone off so I tried to let the battery die out and then recharge it which resets it. But that didn't help either. Buttons still aren't working.
    This means I can't turn on silent, adjust volume, listen using my headphones or use hands-free.
    Any ideas why?
    I purchased my phone back in Aug '08 so it's just out of warrenty, of course!

    Problem is since I bought mine online, I have to send it in to the online store to have it checked. And they couldn't even promise they could, or would do anything.
    I live in Norway and there is no Apple store. They have "certified dealers" but they won't look at my phone since I didn't buy from them.
    Bottom line is I will be without my phone for at LEAST a week for them to look at it, and then there is a good change they won't fix it for free or even at all.
    That's why I was hoping for some advice from somebody that may know about this...

Maybe you are looking for

  • Saving a PDF file, where it saves into a paint application

    Recently when I save a PDF it saves into a paint application. Does anybody know how to resolve this problem?

  • How to pass internal table with data in ABAP OO

    Hi experts , Here is the problem... I create a screen 100 and use the internal table to get data from database, and then press the button on screen 100 , it will call screen 200. I use ABAP OO code in screen 200, and i want to keep the internal table

  • How do you change Apple ID from previous provider

    V

  • Page Template selection

    Hello, I am using ADF Faces 11g. I am trying to let users to design their own pages using predefined page templates. I wonder if it is possible to reach registered page templates (which are listed in pagetemplate-metadata.xml) and all facetrefs defin

  • Weblogic redeploys EJB despite warning

    I have my EJB Home and Remote classes in Weblogic's classpath while the EJB Jar (which contains Home , Remote and Bean) in the "applications" directory. When I start up the server , Weblogic deploys the EJB but gives the warning : <Warning> <EJB> <EJ