My high resolution pictures got blurry and pixelet when imported into i-mov

Hi
I am trying to import bunch of high resolution pictures into I-Movie, when run the test, pictures all look very blurry and pixelet (lost pixel). I even disable the Ken Burn Effect inside the picture settings. Is there a way to keep the same quality of those picture when put into the movie timeline?
Thanks

SD video is just 1/3 megapixel. Importing a multi-megapixel image into iMovie turns it into a 1/3 megapixel image (or if you use Ken Burn: a 1/3 megapixel video).
Fear not. When you burn a DVD it will look just fine.
IMPORTANT: When sending to iDVD from iMovie, iMovie may tell you that some stills are not rendered. Do NOT let iMovie render them. iDVD will do a much better job rendering them.

Similar Messages

How to fix lost connections to original high-resolution pictures in iPhoto and how to import an iPhoto Book from one iPhoto library to another

Hi there,
I am using a MBP Pro with 8 GB cache and 1 TB HDD from beginning of 2011 with OS X Yosemite and iPhoto version 9.6 (910.29).
I created an iPhoto Book to print which contains my best pictures of 2013 and 2014. Then I got an error message when I wanted to print the book, saying (translated from German):
Book could not be created.
With photo p233432343.jpg there was an error. The original version of that photo with full resolution could not be found or is damaged. Please replace the photo or delete it from your book.
When I enquired further, I found out, that many, many pictures in my iPhoto library have that problem - only the thumbnail picture is found by iPhoto, but not the one with the high resolution. When looking at the photos in detail one sees that they are not sharp because obviously the photo book only refers to the thumbnail. When I went into the iPhoto Library using Finder, I saw that the original high res photos are still there. As there are an estimated 3000 photos with a lost connection (some still have, it but about 1/2 of my photos don´t), it does not make sense to import those photos manually. This photo book is just the tip of the iceberg, so to say.
Then I looked for solutions in some forums. I had two lPhoto libraries, one on my HDD (120GB) and one on an external HDD (175GB). Assuming there might be problems, I have deleted (moved) the one on my HDD, because the "right one" is the one on my external HDD and started iPHoto again using the alt key. But that did not work either.
I then tried to repair my iPhoto library using iPhoto Library Manager, and merged and rebuilt libraries. The library that came out was crap - all folders that had lost connections to the high resolution pictures now have zero photos in it. Also it is lacking the projects, including the photo book I created.
Then I went to find out if there is a way to import the iphoto book project from the old, corrupt library into the new, repaired library but could not find anything. It can only be exported as a file structure or website. As the file structure is missing the high res pictures, that does not even solve the "little" problem of the photobook.
I would REALLY appreciate your help on the two questions:
1- Can you advise what I need to to do to to get the connection to the high resolution photos established again ? As it is more than 3000 photos, I use an automated way of reestablishing that connection. Probably an answer to this question would make question 2 irrelevant.
2- Do you know if there is a way to export and import a book project created in iPhoto from one library to another ?

1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library.

My laptop got unplugged and died when importing video..

my battery is kind of dead and won't hold a charge, and when importing video from a canon hdv hv20, my macbook pro got unplugged and died. now i have some phantom space missing on my hard drive..where can i find it?how do i delete it?please any help.

In the Movies/iMovie Events folder, you may find a folder with the Event Name that you were importing into. You can move this folder to the trash and start over. You may need to empty the trash.
If you had other video in this same Event Name, be really careful or you may lose it, too.
You should be able to reimport the video from your Canon.

Text looks horrible and blocky when imported into DVD SP

Why is it that all my text looks terrible when I import it from Photoshop into DVD Studio Pro for a still menu? The font size is 20pt, and the text type is Franklin Gothic, a sans serif Helvetica variation that is extremely simple and basic. Why does it look so bad? Is it the layers? The field dominance? The pixel aspect ratio? I've asked around and many people simply say "dvd studio pro does that sometimes." What? That's not seriously the bottom line is it? What if I don't want to redesign my whole menu?
I posted an example of how the text looks...
http://www.vacationlandfilm.com/dvd_text.jpg
Thanks for any help you could give me!

http://discussions.apple.com/thread.jspa?threadID=778297&tstart=15
Try this one...there isn't a solution, it is a confirmed bug in the software. Check out the thread above, I included an e-mail address and issue i.d. so you can write a message letting them know that I'm not the only one having this problem...
The same issue affects the normal way of creating slideshows as well as still menus. The workaround is to create a menu that loops at around :30. However, at the loop point the text will go jagged for a second while it loops back to the beginning. So, it's not a perfect workaround.

FaceTime freezes when same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

FaceTime freezes when I call my son's iPad. Calling his iPhone in the same room has no problems. The picture is high resolution. There are no freezes when calling my daughter's iPad but the picture is lower resolution. Can I troubleshoot this?

Thanks Mario, but I tried everything there before posting my question. I may not have been clear in my question since I accidently recorded the whole question as the title and tried to edit. In brief: I have no trouble connecting with my daughter's iPad or my son's iPhone. However, his iPad is sending much higher resolution pictures and we disconnect after about a minute. Oddly, he can hear and see me while my screen first freezes, then goes black and gives me a message of "reconnecting" until it quits trying and shows the buttons to end or redial. The picture quality difference is what is leading me to believe it is bandwidth related. However, I get anywhere from 5 to 10 MB download speeds; usually closer to 10. Last summer, I had 4 granddaughters on their iPads, a grandson on his gaming device and me on cell phone or pc, all using the bandwidth at once with no complaints. If there is a way to lower his outgoing resolution, I think that would help.

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!! iPhone 4S, iOS 5.0.1

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1

Try updating to iOS 6.1.3.

TS4006 I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL into on this server ! Please help!!

I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!

What is it you are trying to do? Restore an iCloud backup? Back up to iCloud?

When i did the last update my pictures got scrambled and the dates are gone

When I did the last update my pictures got scrambled and the dates are gone and there's strange numbers and letters underneath them.

It says that to download past purchases, they must done under the apple ID that was used to purchase the items. I have an original ID for my iTunes on my computer. At some point I changed my apple ID on the iTouch since that email account was deleted. So I was syncing through iTunes under a different ID then was on my iTouch. Can I do anythng about that so I can check past purchases?
Since the apps aren't in the backup, how do I transfer the apps on my iTouch to my iTunes?

As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

HT3275 My backup got interrupted and now when I try to backup I get the following message: The backup disk image "/Volumes/Data/Macintosh.sparsebundle" is already in use. What should I do so that I can start backing up again?

My backup got interrupted and now when I try to backup I get the following message: The backup disk image “/Volumes/Data/Macintosh.sparsebundle” is already in use. What should I do so that I can start backing up again?

1. Restart your MBP and try the back up again. If this fails try step #2 below
2. Unplug your Time Capsule from the AC giving it thirty seconds or so to discharge, plug it back in and retry the back up again once you're back online.
3. if step #1 and #2 fails, go here:
http://pondini.org/TM/C12.html

My Iphone got wet and now when I turn it on it will not go past the apple logo. Please help.

Hi,
My Iphone got wet and now when I turn it on it will not go past the apple logo. Please help.

Take it in for service or most likely out of warranty replacement. Water damage voids your warranty so you will need to pay towards the replacement.
Cheers
Pete

Imported ID pdfs appearance alters when imported into Quark as picture

Can anyone tell me why Indesign created pdf's change when imported into a quark picture box? I receive ads from various companies for a magazine in hi-rez pdf formats and when imported the appearance changes to include all the components/elements/boxes/etc. of the make-up of the ad....the things that are not supposed to be seen. Please help... advertisers are complaining and i can not stop it, or fix it.

Quark converts PDFs to EPS internally and thus has no support for the
more advanced features of PDFs exported from InDesign.
You should request EPS or PDF X/1-a if you want to continue to use
Quark. That said, this is an InDesign forum so I will heartily recommend
you switch to InDesign.
As you've discovered more and more folks are doing just that and you're
going to be left in the dust and those advertisers are going to be
looking elsewhere to spend their money.
Bob

I have MTS files imported from a Canon HD cam. They import into I movie and I see them in the Finder folders and they preview fine. I have a new project and some of the clips are freezing and some audio is now gone? Do i need a file converter and convert

I have MTS video files that import from a Canon Vixia HF S20 HD camera. I imported into I Movie. They converted into MOV files and I see them in the movies folder in finder. They view fine and run through the events folder in Finder. In I Movie, I created a new project and used a "Theme". The project worked fine at first but then some clips started to freeze and some lost audio. The effected clips are the same in the project library and in the event library, meaning they are froze in both places. As I said when i view through finder the MOV files preview and work fine. Is this inherent to MTS files using in I movie. SHould i consider using a file converter to convert to MOV files prior to importing into I movie.
I found on Apple support site info that states the MTS files can only be imported through the camera. I am developing my back up procedures and now I am faced with backing up in the original MTS files but not being able to reload if necessary into I movie. Any suggestions?

I'd like to add that after I import these clips without thumbnails, iMovie does give me an error and say that they could not be imported. No explanation as to why, though. Again, they play fine on my camera.

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Are you connected via wifi? If so, and it is an option, try connecting using a ethernet cable. It sometimes seems to help as it can give a more reliable connection for the 5.3gb download.
If you do manage to download it you may want to make a copy of the installer file - which gets downloaded to the Applications folder - before running it as it self-deletes on successful installation. It may save you another monster download in the future.

Hello, I'm using Photoshop elements 11 on a mac, I've just updated my mac to OS X Yosemite and now when I try to move an image it just springs back to where it started from!

Hello, I'm using Photoshop elements 11 on a mac, I've just updated my mac to OS X Yosemite and now when I try to move an image it just springs back to where it started from!
any ideas on how to fix this?

Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10

My high resolution pictures got blurry and pixelet when imported into i-mov

Similar Messages

Maybe you are looking for