My home button doesnt work at all and its not broken and it didnt fall. What should I do to solve this issue?
This is an iPad replacement because the ne that I had before rejected my sim card so Apple sent me a new ne for free. I received it last Wednesday and the home button didnt work correctly. And today, a week later, it just stopped working completely, whenever I press it, it doesnt work. What should I do? Are there any steps that I can take to try to solve this button issue?
hmm.
it literally does nothing?
If the engraving is important to you, then you may wish to get it repaired.
I would recommend calling iphone repair www.iphonerepair.com
or iresq www.iresq.com
but first try this:
https://discussions.apple.com/message/15143496#15143496
--Sam
Similar Messages
-
my ipod 5 froze and wont work or anything and my home button doesnt work so i cant soft reset or anything does anyone know what to do about this?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says plae the iPod in Recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I had an appointment this morning with Apple to try and solve the problem with my lock button ranomly not working anymore and a few hours before my appointment with the Apple store i was using my phone and my screen randomly went black and stopped working. And the p.roblem now i cant use it. I tried restarting the phone but I can't restart it due to my lock button not working so i need help with a solution on what i can do. I missed my appointment today because i could no longer use my phone and i'm now stuck using my laptop. I did also try connecting it to my MacBook but the screen was still unresponsive and black. I rescheduled my appointment to Monday to see what is wrong with my button and screen but in the meanwhile i would like to know if there is anything i can do or if i would just have to wait until monday and take it in to Apple. Any help would be really appreciated as i am phonelss for now until i take it in to Apple in a few days. Thanks.
You wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New... -
So itunes is giving me problems. Since around Christmas time, itunes decided to stop reading my ipod. I connect it to my computer with the usb cable and my computer will recognize that a device is connected but itunes will not. If I go to file->devices and try to sync, all of my sync options are grayed out, while before it would just automatically sync.
When I run diagnostics it tells me that under ports that it cannot find usb ports (it has a green circle?), a type of cable isn't found, and that no device is connected with the usb cable (which my ipod is). I have been trying to fix this issue but nothing is working. I've tried restarting my ipod, itunes, and my computer, i've also tried resetting my ipod and uninstalling itunes then reinstalling itunes but nothing seems to be working.
Does anyone know how to solve this issue?Do the USB ports work for other devices?
Does the iPod charge?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
My IPod Touch home button doesnt work at all, so i was wondering how i could fix the home button??
Does anyone know???
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
HT1414 my battery dies very fast and my home button doesnt work many times.
my battery dies very fast and my home button doesnt work many times.
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem
Try using this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode -
dropped my iphone and now home button doesnt work and will not charge.lower third of it seems not to work.i assume it's had it.what will i lose off it?
rbrook0113 wrote:
I know any device could malfucntion but if it costs $40,000 to buy you could at least warn someone of the possible malfuctions. It makes the company look bad when a large amount of your devices act up and you "cant help them" if they dont pay extra. Im just saying.
Sorry but that makes no sense at all. How can they possible know what things will possible malfunction on your device? Anything that they think is highly likely to malfunction they would have addressed in desiging and manufacturing the device in the first place, during development. They've made and sold many millions of iPhones, and many of them have lasted years without any problems (I know, I've owned such iPhones personally). So how could they possible know if yours was any more likely to develop any issues than any of those other trouble free ones?
It's hardware - stuff sometimes breaks randomly. No amout of money ever guarantees or even reduces the likelyhood of random product failures.
Take it in to Apple and see about getting it fixed. -
i have and ipod touch 4th gen that has the white screen of death but my home button doesnt work. how do i reset it?
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
my iphone 4 is not in service its deactivated the home button doesnt work meaning theres tape to keep it in its place, and the front screen is cracked can i get a new iphone 4 for free. what should i do.
Take it to Apple for an out of warranty replacement for $149US.
-
My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipod will not charge or turn on or show any sign and its not jailbroken and i tried holding the home and power button and all that stuff but nothing works please helppppppp
Go through the steps here and see if anything works for you.
iOS: Not responding or does not turn on - Apple Support
You might have to bite the bullet and restore the device if nothing else works. If that doesn't bring it back to life, make an appointment at an Apple Store and let take a look at it. -
My iPhone 4 wont turn on, It wont go passed the charging icon and then when I take the charger out it says it needs charge. Its not the charger as iv tried several and holding lock and home button doesnt work please help!!!!!
Hello there, Conorjl7.
The following Knowledge Base article provides some good, practical steps for troubleshooting issues with charging:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Particularly:
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My iPod wont turn on i was using it one moment and it was fine now its not turning on. my home button doesnt work so i cant use that solution what should i do now
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode,
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod has a white screen and the home button doesnt work
my ipod has a white screen and my home button doesnt work so how can i fix it?
Try as best you can:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode use this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help
If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808
Maybe you are looking for
-
What's the difference between thunderbolt and mini displayport?
I'm trying to connect my Macbook with a monitor and I'm thinking of what cable to get. I will have to connect using a (Thunderbolt to HDMI cable) or a (mini displayport to HDMI cable). I was wondering what's the difference between Thunderbolt and min
-
I am trying to update my MAC to get iCloud on it, prior to the ios7 update. I do have a pc as well, so i can sync it there if needed. any help or suggestions are much appreciated!
-
No sound; Video to iPod Convert
Hey, I am trying to convert a .mpg video file (Bit Rate: 1395 kb/s) and when I do there is no sound. The video aspect of it is just fine. Edit: I just tried to convert it to .mov with Quicktime rather than iTunes and failed No sound... Anyone know wh
-
Epson 1660 scanner not working in Lion
My 1660 scanner software says its not for intel macs but worked in 10.6. Any updates I have not found them. Where?
-
From a weekly view we release the fcst to r3 and SNP in daily buckets. Its getting release correctly to SNP but not to R3. The data in R3 is off setted by a day. We dont have any user exits in CIF. I dont see any problem in publication setting