My Home IT Camera cannot be accessed via Internet

I have a Tenvis IT Camera on Port 81 connected to my BT Infinity Modem which works fine on WiFi at home but not over the Internet world wide, someone said that Port 81 may be blocked on my router. I have tried the PortForwarding Software to no avail. Can anyone help
Bob

This link should help.
Port forwarding problems
There are also some forum threads concerning this camera.
http://community.bt.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AOthe...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
Thanks.
Solved!
Go to Solution.

This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants. Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected. When no connection is detected you could have the program run in an idle state. The attached screenshot shows a general way to do this. Have a good evening!
-Bob
-Bob
Attachments:
idle state.JPG ‏45 KB

Web Dynpro application accessed via internet?

Hallo
We should develop one Application, but it should be accessed via internet. Our Personal System and Material System ist from SAP. Thus we want to did the GUI in Web Dynpro for Java.
I'm not sure if the WD runs on internet? And ist it ture that SAP only good for the intranet application? Have you any example to solve the problem such as authentication and autorisation for the service (using adaptive Web Service)?
Thanks a lot and
Nice regards
ping

WD Java Apps can be accessed outside Intranet for example companies expose their ESS/MSS applications(WD Java apps) on the internet for their employees and managers. However you need to check for browser compatitbilty depending on the Portal SP level you are using. WD Java many not be supported by all browsers and versions.
Hope this helps
Siva

Access via internet

Hi,
Can I configure my time capsule as a file server and can I access over internet via PC?

You can setup the TC as a fire server.. although as I have posted many times this morning.. it is a bad idea.. the TC is unable to back itself up. It has a single disk so any failure is total failure.
And no, you cannot access it from a PC remotely in any way that is secure unless you are using a vpn router and have the TC installed behind it as bridged device. That is really the only way, as SMB file protocol is not available on the WAN of the TC, only AFP.

Just set up our Apple TV and it works fine for NetFlix. However want to stream photos and I Tune library from home computer but this computer accesses the internet thru a VPR at my wife's place of enployment. Other than a 2nd computer any suggestions?R

Just set up Apple TV on home network. Works fine for NetFlix but we can't stream I Tune libruary or digital photos thru it to our home TV as because of my wife's work we bypass COX and access the internet thru a VPN offered by her employer. Was told we either have to buy a second computer (two expensive for just these two functions) or keep turning on and off the VPN(not practical). Any other ideas? Thanks

Does she need to access the internet through her employer, or is she just trying to access her internal network at work?
If it's the latter, split-stream VPN clients (like Cisco AnyConnect) will split traffic so that only that directed at a particlar domain gets tunneled.
I have an AnyConnect client at home, but I normally only activate it when I'm using it, so I've never tested it with HomeSharing. I'm currently traveling, but when I get home tomorrow, I'll try it out and let you know if it works. If it does, your wife can check with her employer to see if she can configure AnyConnect to work with them.

BSP application access via internet

hi all,
has any one implemented Bsp application which is accessed via eportal on the internet ,
i have a application which works fine on the intranet , but it does not work when accessed via the internet .
What could be the reason?
REgards
sameer

to access your BSP from internet your app server from where BSP runs has to be exposed to internet (DMZ). you should talk to your system admin guys to set it up
Raja

Survey access via internet without sap login

Hi!
I just created a survey using crm_survey_suite. How can I let our external customers (without sap login) answer the survey via internet? I'm currently working on CRM 4.0.
Thanks!
Steph

Hi steph,
You will have work with Basis team and create an anonymous login id and password for your survey link which canbe sent on mail.
Regards
Raj

Home Calendar Server. Need Access via Wan & Lan

Hi,
I have just setup my new Mac Mini server 10.8.2. I have configured DNS, DDNS (via no-ip), Open Directory and the Calendar Server. I want to be able to access calender info on my iPhone and MBP at home and on the road. I can access the Calender server from home using myserver.domain.com but this does not work when i´m off my LAN. I can access the calender server on the WAN using domain.com. Is there a way to configure DNS, so that i can use one server address for both LAN & WAN access?
This has been driving me nuts for a fair few hours now, so thought i´d just ask someone that might know...
Thanks in advance.

I am struggling with the same issue. I think I found the answer, but I have not yet tested it.
My setup is a mini server connected to a Time Capsule to connect to the internet. Time Capsule is set up to let Contacts and Calendar information.
My domain name is updated through a DNS service.
If your domain name is registered for DNS as domain.com (A Record), you may need to add a new hostname to your DNS service, creating a new A record, server.domain.com.
From what I read, this is the most likely issue with the problem you have described. I have been struggling with this for the past few days. I just need to get outside my wifi coverage to see if adding the new A record has fixed it.
Hope this helps.

SAP Installation in MSCS - SAP cannot be accessed via virtual host name

Hi Experts,
We have installed SAP NW 7.1 CE in MSCS for High Availabilty. Our primary application server is installed in a separate server. I can only access SAP via the hostname of the primary application server (i.e. http://<hostname of primary appserver>:5<instance#>00/nwa) and not via the virtual hostname of the MSCS cluster. Is there any configuration I have missed? I have followed all the preparation needed for HA installation.
Thanks.

Hi Sameysha,
As already posted, you only has SCS in HA, the "normal" way will be that you has one CI and as many DI as you need and use a Web Dispatcher. If CI fails then WD will send the requests to remaining DI´s so you won´t loose service.
In MSCS if you install as per the guide, Instances are not HA because they are installed locally in each node, if you have two nodes then you install CI in Node A and DI in Node B, if Node A fails then SCS resources migrates to Node B, CI is out and you work with the DI installed in Node B.
To be able to use any of the Intances installed you need a Web Dispatcher that does the load balancing between the CI and DI´s, if CI fails then you get service from the DI´s.
Hope this clarifies this.
Regards,

Network Camera Access Via Internet

I have a d-link network camara. I connect it to my FE04 router (1811). How do I setup to have my people access to this camera by having them to enter ip address in internet with userid and password?

dynamic dns:
http://www.cisco.com/en/US/docs/ios/12_4/ip_addr/configuration/guide/ht_ddns.html
As for the firewall, nobody can access your network because of nat. IOS also has firewall, but in most cases it is not necessary.
Hope this helps, please rate post if it does!

Setup WSUS - Now My External Website Cannot be Accessed via Domain Machines

Hi all,
I recently set up a WSUS server for my company so I can manage updates to domain computers. I got it working and each domain computer now looks to the server (192.168.0.101) for updates. In addition, I have a DC on this machine as well which has DHCP and
DNS setup on it too.
After I installed WSUS, Windows set up a IIS server so it could send out updates to computers. Unfortunatly, local domain (prorepmktg.com) computers stopped being able to access our external website (found at http://www.prorepmktg.com) this is hosted by
a 3rd party and is not a part of our network. I assume this is a DNS issue, but since it is also probably connected with WSUS, I need some help being able to allow access to our external website without disrupting any WSUS functions.
I apologize if this issue is simple to fix, but I am stretching my knowledge of DNS and WSUS here. I am running Windows Server 2012 R2.

I have a DC on this machine as well which has DHCP and DNS setup on it too.
I am running Windows Server 2012 R2.
This is your very first challenge. Have you researched the implications and requirements for installing WSUS on a Windows Server 2012/2012R2 Domain Controller?
Unfortunatly, local domain (prorepmktg.com) computers stopped being able to access our external website (found at http://www.prorepmktg.com)
I'm fairly certain that the mere act of installing WSUS and/or IIS would not have impacted your ability to access external domains.
Does this issue ONLY affect THIS external domain or ALL external domains?
If only THIS external domain, then it also begs the question of what you configured in DNS to allow your internal clients to get to that external domain.
Also relevant is this question: What is the Active Directory Domain Name of your internal domain? I'm much more inclined to think this issue began when you installed/configured DNS, not when you installed WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Multiple Virtual Machines access via internet

Hi, I dont know exactly what I am looking for but basically I have deployed two testing servers and I want to create different VMs on that and provide it to developers working from their home. I dont know how to be specific on that but once the conversation starts I ll have a framework to work with. Can somebody point me where to look for such a deployment technologies or suggest a manual homework ?
Thanks.

Sorry, the internet was down .. Anyway to answer those questions -
1. They are going to be commandline.
2. They are going to tests python apps so I am going primarily with ubuntu-servers
3. There isn't going to be a lot of VMs, for now. 4-5 is okay.
4. I should be able to access them remotely vis ssh or/and web app access
And ability to create vms via web or some gui remotely would be nice if there is any ?!?

Remote access via internet

Have an Vitek DVR with several cameras and after correctly configuring port forwarding on the router and input the IP to the DVR, I am able to view the camera pictures without any problems on the MacBook Pro. However, being able to view the camera results from the IPHONE via remote access, through Safari, requires an APP. Having tried the VITEK DVRViewer app, and half a dozen other apps, I am unable to connect via the iphone. I contacted VITEK and was informed that they are aware of the problem, which they say is due from the IOS6 update, an updated app was submitted to Apple for approval, which would solve the issue.
I have found many hits on the YouTube with the same issues. Does anyone know of a solution, or if they were told by VITEK of the same solution?
Thank you

This would not seem to be an issue with Apple Remote Desktop, Apple's software for managing networked Macs and the topic of this forum. I'd suggest you take this up in the iPhone forum, where you'll be more likely to encounter someone attempting to run the same app and hence provide suggestions.
Regards.

Remote access via internet to another macbook

I would like to access my moms computer when she needs help sometimes via the internet. We both have Macbooks and high speed internet. Before I move away I can install whatever is necessary on her computer. Then if she has computer problems (as she often does) I can go onto her computer to sort it out. (Obviously, I will have to phone her to tell her to open up the computer). Is this a really involved thing that I am asking? I don't really know where to start. I have heard of remote desktop but after reviewing it, it sounds like it is much more than what I am looking for. Any info to point me in the right direction would be much appreciated.

So why is system prefs saying, "To log in to this computer remotely, type "ssh [email protected]" at a shell command prompt."
Is it just because it doesn't know its behind the router?
I have tried telling finder to connect to server; vnc://65.95.40.34 and it just times out.
I have also tried setting Chicken of the VNC to;
HOST: 65.95.40.34
Display: 0
Password: (password that I set for login on her computer)
This just times out eventually.
I have also tried terminal both ways:
"ssh [email protected]" and
"ssh [email protected]"
and it tells me "ssh: connect to host 65.95.40.34 port 22: Operation timed out"
It take a minute or two using any of these methods before it tells me that its timed out.
I have made sure that she has her computer opened up and turned on of course and the settings so it will wake if admin accesses remotely.
Any ideas as to why this wouldn't work?
Thanks for all the info.

Cannot open pdf via internet

I tried the Repair Adobe Installation via the Help menu. I get the following error message "Uninstallation of the patch package is not supported". How can I fix this?

Hello,
I forgot to test this solution but i've tried it this morning without success.

My Home IT Camera cannot be accessed via Internet

Similar Messages

Maybe you are looking for