My home share is not working i have tried everything it works on one computer but not the other help!
I have tried uninstalling and reinstalling itunes i have tried messing with my avast and I cant get anything to work please help me! it works on another computer in the house but everytime i try to click on his library it says it loading his library and then stops and goes to my music. plz help!
When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.
Similar Messages
-
one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
My iPad sound to videos and music doesnt work I have tried everything the sound bar is gone
My iPad sound to videos and music doesnt work I have tried everything the sound bar is gone
Not sure if this will work, but you could try the app My Contacts Backup. This will back up your contacts as an email attachement. Send the email to yourself. Then turn off contacts syncing (to erase the contacts from your phone), open the email and tap the attachment to re-import the contacts to your phone. You will still have to go through them and remove the duplicates but at least they should not be duplicated again. (There is an app called
Remove Duplicate Contacts and Events that claims to be able to find and remove duplicates but you'll have to read the reviews in the app store to decide if you want to try it.) -
HELP!! WRT54G2 works for one computer, but not for the other
I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!
As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online... -
Since I have upgraded to iOS 7 messages on my ipad will not send. I get a red message saying not delivered I have tried everything suggested so far, still nothing.
I'm having the same problem with my Wife's old iPhone 3G. It's battery went completely dead and now all it does when I hit the power button is shows the screen that shows the animated charger/battery saying to plug it into a charger and then it shuts off. The thing is, it's plugged into a charger, I've tried several, I've tried getting into DFU mode to restore 4.2.1 and see if that would help but I can't get into DFU mode because the iPhone shuts off before it gets a chance to load I suppose.
If I find a solution that works to get the iPhone out of this quirk/bug mode it's in right now from the battery dying, I will post it here so you can fix your iPhone as well.
Best of luck with finding your solution to fix this! We're both probably going to need it because so far I've searched for the answer for the past hour and still can't get it to even start charging.
-James -
I need to cancel my monthly subscription, i have tried to cancel a few days before but not succeed and then auto-renew my subscription. I almost want to delete my adobe account. I need to cancel my monthly subscription, who can help me?
Cancel the Cloud http://forums.adobe.com/thread/1439535?tstart=0 may help
or
Adobe contact information - http://helpx.adobe.com/contact.html -
my ipod touch is fully charged but will not turn on have tried soft reset and pluging into itunes but it does not even register it is plugged in help??
See Here > Device Not Recognised http://support.apple.com/kb/TS1538
-
Why is home sharing showing up on one computer but not the other?
My homesharing is showing up on one computer but not the other! They are both under the same account and both iTunes are up to date. Unfortunatally, of course its showing up on the computer that I dont need it on. Please help me! Thanks!
It could be a firewall issue. Try disabling the firewall and see if that helps.
-
Songs playing on one computer, but not on others.
I use my iPod on three different computers (Home/Work/brand new laptop). I recently upgraded my iPod from original 80gb to new Classic 160gb. Before I purchased my new iPod, I transferred my whole library (about 50gb)from my iPod onto my new laptop(using transfer software). Then when I purchased my new iPod I synced the whole library to the iPod. The problem is that when ever I connect my iPod to my work or home PC some songs have an exclamation mark next to them (and they don't play). So when I went to replace the "exclamation marked" songs from the laptop (where the whole library exist), I had NO exclamation marks. So my question is why do the songs play on one computer but not the others? Please help!
It looks alot like the problem we had when we couldn't resolve the CUPS server FQDN. But the desktop and laptop are on the same subnet and use the same DNS servers. I can ping the CUPS server by FQDN from the command prompt on both
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:46,319 [0x00001394] WARN LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::RegisterWithNextProxy[2852] - Order of routing attempt: :5060(TCP)>. Attempting to register to
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiSinks - (WABIMSG_REGSTATE6) ********* CUPS (@) (slot 0) REGISTER STATE: Registering... *********
2010-02-11 14:57:49,787 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:49,787 [0x000016f4] ERROR LCWabiSinks - (WABIMSG_REGSTATE11) ********* CUPS (@) (slot 0) REGISTER STATE: FAILED!! code=503, reason=Service Unavailable *********
2010-02-11 14:57:49,787 [0x00001394] ERROR LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::onFailure[3561] - Failed to register! error-code: 503, msg: 'Service Unavailable'. Retry in 20 second(s).
I swapped out the username for and the domain with to protect the innocent. Or maybe the guilty; we will see. From the command prompt I can ping BC-IPT-UPS. and I get a response from the CUPS at the correct IP address. -
"printer is offline" appears on one computer but not the other (both windows 7)
printer is offline" appears on one computer but not the other (both windows 7)
This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver. -
Once bootcamp is installed on my Mac, how easy is it to go back and forth from windows to Mac? Just a press of button or do I have to completely log off of one to go to the other?
Using vitual machine programs (VirtualBox, Parallels, VMWare Fusion) you can run both at the same time.
Load Windows under BootCamp. Then load the VM software and select the existing BootCamp partition as the "virtualized space".
But ... BootCamp first, following Csound1's advice about backups. And you will wantto boost RAM most likely because you need to allocate certain amount of system RAM to each "virtual machine", as well as leaving some for OSX.
But ... BootCamp first. -
I have one Iphone, and two computers. They both have different purchases on them. One is older than the other. and one was my moms. How do i get the ringtones off of my computer and onto my moms computer to use all of them on my Iphone?
Copy them to a cd/dvd/flash drive/external drive/etc, then to the other computer.
E-mail them. -
Home sharing library loads on one computer but not the other
I have turned on Home Sharing (using the same account for both) on two computers. One of them loads the other's library, but the other either continually says it is attempting to load, or immediately reverts back to the normal Music library screen.
I have spent several hours searching the Internet to find suggestions but nothing seems to be working:
I have downloaded the newest version of iTunes
I have tried setting up a new account, de-authorising the computer on all accounts except the new one
I have turned off the sharing located under the Preferences tab
I have made sure that iTunes is not blocked by a firewall
I have checked that the Bonjour service is running
I have tried turning everything off and starting all over again
I would welcome a new solution! Thank you!It could be a firewall issue. Try disabling the firewall and see if that helps.
-
I have had an iTunes account for 3 years. I have tried for at least two years to delete these purchases that I did not purchase off my iTunes downloads. I have tried everything. I took iTunes off my computer, redownloaded . I have tried deleting and removing them. I do not know how they got there but everytime I go to download anything these 8 purchases start to download. I then have to pause them all and back to the agganizing termoil of trying to delete them off my account. Can you please please help meI am beyond aggrevated because nothing I do deletes these things off, and I have tried for two years with no results but more aggrivation.
I would contact Apple Support either on the phone or via e-mail and have them check if they could remove these questionable purchases off your account.
There is currently no way to do this on your own.
And re-installing iTunes does not help as all the purchase info is stored on Apple's servers. -
Implicit read with assembly module instance working on one computer, but not another
Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?
Maybe you are looking for
-
Make-to-Order customer Return Order triggers unwanted ATP check
When executing a return delivery on a Make-to-Order (Strategy 20, no APO) material, we notice that the ATP check (checking rule BE) gets triggered. On a return this makes no sense and of course fails, stopping us from creating the delivery. How can
-
Is there a way to add a password to a certain folder?
Is there a way to add a password to a certain folder on a mac?
-
Cant update to PPro 4.1 Adobe support ignore me
Did a clean install of PPro CS4 on Vista 64 OK. Ran the 4.1 update - says it installed OK. Go to run CS4 and get error message - "Audio Filter Host.dll not found. Reinstalling may fix the problem" I reinstalled the OS , (formatting C drive), reinstal
-
Hi During data extraction im getting the following error message "Error calling number range object ZMATNO for dimension D2" pls help me out.. how should i proceed from here... Thanks in advance, Sowdha.
-
In Soundtrack Pro 1.1, is there a way to export only part of a mix? I've tried setting in and out points and making selections, but it just exports the entire mix anyway. The only thing I've been able to do is 'Set end of song', but I still have to e