My home wifi has just stopped working

All of a sudden I can't connect to my home wifi network. I have tried resetting the network settings, and also resetting the ipod, none of which work. It comes up with the name of the network, with the strength of signal etc, but when I put in the password, it says 'unable to connect to network.' Please help me! (My ipod is a 32gb Ipod Touch 4th generation)

What make/model router do you have?
What ISP are you using? (Some ISPs periodically update router firmware)
What type of security are you running? (WEP, WPA, or WPA2)
Is MAC address filtering enabled in your router?
Do other devices connect to your network? (Note, this does not mean stay connected but, rather, can they reconnect if disconnected.)
Does your iPod connect to any other networks?
Have you made any router changes?

Similar Messages

  • Hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

    hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!

    Try the following:
    1. Reset
    Hold the Sleep and Home button down until you see the Apple logo
    2. Restore:
    http://support.apple.com/kb/HT1414
    3. Recovery:
    http://support.apple.com/kb/HT1808

  • Hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10

    hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10
    also, these were bought on line with no disc (god knows why)
    how can I access these from adobe.com

    Hi Dave ,
    Could you please elaborate a bit more about the issue ,what exactly has happened?
    Are you not able to launch and PDF' or getting some error message ?
    You can log in to Adobe.com with your credentials .If you do not have any prior credentials ,you need to create an account .Adobe.com will either let you purchase the product or opt for a trial version.
    Please go ahead if that matches your requirement.
    Regards
    Sukrit Dhingra

  • My iPhone has just stopped working and I only had since August 2013

    My iPhone 5 has just stopped working it had 70% charge in it and I've tried recharging and nothing it's just dead.

    It's under warranty for a year.
    Contact your nearest Apple Store and bring it in to be serviced.
    ~Lyssa

  • My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

    Yes... to no avail

  • CUCI LYNC application has just stopped working

    Hi guys, anyone come up with this issues with CUCI LYNC, the application has just stopped working, the error in the application log is "could not connect to device provider". It was all working fine and just stopped working, and unaware of any changes to the system which is 6.142190-3. Cisco UC Integration for Microsoft LYNC version 8.6(2.20916) & Microsoft OC 2007 r2
    Thanks in advance
    Jeff
    Sent from Cisco Technical Support iPad App

    Just in case anyone else has this problem, the Tomcat certificate on the cluster had expired. Until you can schedule a change to resolve it, you can put the following in the regkey "ccmcipservervalidation" =0 and restart, it should then log in if it were the same issue.
    Sent from Cisco Technical Support iPad App

  • I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    Thanks for that.  I did as suggested but when I tried again, it still did not work.  Another  com.apple.Grab.plist appeared in the Library.
    I now have the following files in Library
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
    file://localhost/Users/peterpatel/Library/Preferences/
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
    What do you suggest I do now?

  • My reset/sleep button on my iPhone 4 has just stopped working, how can I fix this??

    My reset/sleep button on my iPhone 4 has just stopped working , how can I fix this??

    Hi Hamish1P,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app you installed is not working. I would recommend that you read this article, it may be able to help the issue.
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Cheers,
    Mario

  • IHP G70-460us laptop and the webcam has just stopped working

    I have a HP G70-460US Laptop and the webcam has just stopped working.  How do I get it working again.
    This question was solved.
    View Solution.

    Hi
    Please find the link given below might help you to fix your issue.
    Webcam Troubleshooting (Windows 7)
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

    My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

    The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

  • My Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

    my Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

    Hi hema87,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps you can try if FaceTime is timing out:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Cheers,
    - Ari

  • Mail server has just stopped working. No errors in any log. Help!

    I am running OS X Server 3.0.2 on Mavericks 10.9.1. Today at around 14:30 my Mail server, which has been working fine for over a year and for nearly a month under Server 3.0.2 just stopped working! I have tried stopping and starting Mail in Server.app and via ServerAdmin but the servcies will not start... serveradmin claims that IMAP is running but that SMTP/SMTPD/Virus Scanner/SPAM filtering/Virus updating are not. I tried disabling the all the filtering services but to no avail. Even though it claims IMAP is running I cannot connect from any client...
    I have rebooted the machine but this did not help. I have looked at all the logs (system, mail, dovecot, postfix, amavis) and theer are no suspicious messages in any of them!
    I am out of ideas and my mail server is down which is very serious so if anyone has any ideas please pitch in.
    Thanks.

    My problems were:
    1.    Server.app shows the Mail service stuck in 'starting' status
    2.    serveradmin shows that IMAP is running but SMTPD, Spam filtering, Virus filtering and Virus updating were STOPPED.
    3.    No clients could connect to either IMAPS or SMTP.
    Diagnostics performed:
    All the various messafge logs (system.log, Mail.log, mail-info.log mail-err.log, amavis.log) show no abnormal messages.
    DNS is working just fine.
    In the end I did the following:
    1.    Stop all mail related services.
    2.    Make a safe copy of /Library/Server/Mail/Config
    3.    Restore the previous days version of /Library/Server/Mail/Config from backup.
    4.    Start the Mail service
    And all was working again just fine.
    I then did a file by file compare of all the configuration files between the workign and not working configurations and I found just the following two differences in postfix/main.cf:
    Not working:
    inet_interfaces = loopback-only
    smtpd_helo_required = no
    Working:
    inet_interfaces = all
    smtpd_helo_required = yes
    I don't think the second difference is so critical but the first seems to break everything (not too surprising I guess). All the other files were identical.
    So, the good news is that all is working again but the huge concern is why this change happenned, seemingly at random. My strong suspicion is that Server.app, at some point when I exited it havign made some minor change unrelated to mail decided to apply these incorrect changes to the Mail configuration. Why it would do this is beyond me. I think there are some subtle bugs in Server 3.0 (and maybe Server 2.2 as well)...

  • My daughters imessage on her ipod touch has just stopped working - to get it going again I reset it with my email address but this doesn't allow her to send messages to any of her contacts.  When I try and put her email back in it says it can't verify it

    My daughters imessage & face time on her ipod touch has suddenly stopped working.  The only way i could get it going again was to reset it up with my email address.  This will not allow her to send messages to any of her contacts in her addess book.  I have tried to set up her email (which she previously used successfully) but it will not allow this it states 'unable to verify email because it is already in use' - anyone any ideas its is driving me mad !!

    Try here:
    iOS: FaceTime is 'Unable to verify email because it is in use'

  • My microphone has just stopped working

    microphone just stopped working any ideas

    you can try a restore
    restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
    Make sure iTunes is updated to the latest version 
    How to back up and restore (iCloud and iTunes)
    http://support.apple.com/kb/HT1766

  • HT4061 My lock button and home screen button has just stopped working, how do i fix this?

    My lock and home screen button has just suddenly stopped working, i have looked on YouTube, unscrewed the back and tried the methods that work for other people but it hasn't worked.
    Im not on contract, if it needs to go in for repair im sure it will be very expensive!
    What shall i do?

    It's a hardware issue. If it's out of warranty, you can get it replaced but there's an out of warranty fee associated.
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

Maybe you are looking for

  • Change the colour of the outside of your iphone 3GS?

    I have an iphone 3GS in white but the white shell,cover whatever you may call it is slightly chipped broken and generally looking not so great. So i was wondering if it is possible to have the shell/cover replaced in white or to black, can you do thi

  • Data from an odata service not displaying data in all columns.

    Hi This is my Odataservice the code in view. I have placed only the first 2 columns code. The rest are similar the last few lines oTable.setModel(omodel);    oTable.bindRows("/MixmatpoXS");    return oTable;  The result I am getting Only Two columns

  • At the time of Batch input session system asking business place and profit

    Hi, After doing the transaction f.26 interest calculation on customers (security depost) then we are running the batch input session there system asking business place and profit center there we are giving manually, my client having thousands of cust

  • Adding a interval to a date

    I have the number of day and months that I want to add to a date in a number variable, how do I add it or how do I transform a number into an interval of that many months? I have tried a few things without success: Works with literals SQL> select sys

  • Please help... Song count not updating on Nano

    Hello. No matter how many songs I add to my Nano the song count on the front or main menu of my Nano never updates. My first time syncing I added 329 songs, now I have over 1000 on my Nano but it continues to say 329 at the main menu. Any ideas? Am I