My homepage will not update, it's stuck on old information, please help!
I have dellbiz.myway.com as my homepage. For several weeks it will not update the information on the homescreen. The same article appears at the top (there are usually several different ones that change every few seconds but this is not happening, it's stuck on an old article). You can also enter a zip code for your local weather and I can do that and it changes to my local weather at that time but when I close the browser and re-open it, it does not keep that setting even though I check the box to "save the location." Can't figure out how to get this straightened out. I have cleared the cookies, history, cache, etc., but to no avail.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
Similar Messages
-
OSX Tiger 10.4.3 Will Not Update!!!!!! Please Help....:)
Can anyone help me???
I have a Power Book G4 15" Ti 867Mhz1Gb RAM which I recently upgraded the HD to a Samsung 160GB, at the same time I also upgraded OSX from 10.3.9 to 10.4.3.
Since the upgrade my operating system seems to be stuck on 10.4.3.(ie will not update)
I have tried everything, from repairing disk to repairing disk permissions (using OSX Tiger install disc), reboot upgrade, reboot archive & install, but i am still not able to update the OSX...:(
I have manually downloaded Delta (10.4.4) & Combo (10.4.6, 10.4.8 & 10.4.9 PPC updates but they all say my volume does not meet the rquirements.
I have checked about this mac and i am definitely running 10.4.3....
Why am I unable to upgrade????
If anyone can help it would be greatly appreciated!!!
Many thanks in advance!!!
AdamHi guys I appreciate your assistance...but i am still stuck on 10.4.3!!
I just ran archive & install again (OSX 10.4 Tiger) and still I am unable to update from 10.4.3..Is it possible my install disk is faulty??? I have tried absolutely everything including applejack, disk permissions, disk repair ect...nothing seems to make any difference.
Same old statement when manually updating from apple website (using both delta & combo) "this volume does not meet the requirements"
My automatic software update works fine, it just installed the latest iTunes 7.2 no problem, it just wont detect the OSX upgrade...:(
I am about to upgrade my combo drive to a Pioneer DVR K06 and really wanted to upgrade my OSX to 10.4.9 before I install the new optical drive...
Anyone else have any suggestions???? -
My iphone 3 8gb will not update and is stuck on 4.2.1 anyone help??
can anyone help me with my iphone 3 8gb it will not update and is stuck on 4.2.1, everytime i stick it on itunes it just moves the update to a later date everytime, so anyone if you can help me i would be grateful thanks.
" my iphone 3 8gb it will not update and is stuck on 4.2.1, "
That is correct. ios 4.2.1 is the latest available for your iphone. -
i went to update my ipod touch and restore it. it was working fine and then when it it restarted itself it it stuck onone scren te same one when u first get it, it will not do anythig elts what do i do please help i whont my ipod touch back
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
Iphone 5 will not update apps. s
Stuck in "waiting" even after multiple resets to phone and through settings. HELP!Have you tried deleting the waiting apps and then re downloading? I used to get it all the time on my phone in iOS 7.
-
i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.
ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium -
i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!
Does the person who gave it to you still have the receipt ? You can try contacting iTunes Support and see what they say (you will probably need to give them images of the front and back of the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
10.8.4 will not update...stuck at 10.8.3
My app store has the 10.8.4 update in queue and ready to go. When I click update, it asks to restart...so I do. Upon restarting, the app store loads again with the update ready to go, but when I click it, the download bar appears for a very quick moment and then the restart window comes up like before. What's interesting is that when this second restart request is up, the button next to the update in the app store says "Installed" as if I already installed the update...but no matter how many times I restart and click update, I am stuck at 10.8.3
What's going on?A lot of people have reported that. Try the combo update: http://support.apple.com/kb/DL1659
or the Delta update: http://support.apple.com/kb/DL1658 (its smaller and all you need from 10.8.3). -
I have a iphone 4 and it will not come out of the connect to iphone mode. I have connected to itunes and it will go about 3/4 of the way and say the phone cannot be updated. It was installing and update when this happened. can anyone help?
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you should be able to restore to factory settings.
-
My Ipod touch ios version 6.1.3 will not allow me to connect to my wifi, Please help me!!
My ipod touch ios version 6.1.3 will not allow me to connect to my wifi. I tried rebooting my wifi router, refreshing my ipod, resseting the networks and manually logging into my wifi. Sometimes it will go through for a brief moment, but the wifi connection will ultimately disconnect. Each time i try to connect to my wifi afterwards a small pop up will say "Unable to join the network". Please help. it's really annoying and frustrating.
Thank you Carolyn Samit, but nothing is working.
I've restored my ipod both to a backup and back to factory. I know the password is correct,
the router is the newest version (and it's plugged in and on), my ipod is updated, i've turned my wifi settings on and off, i've turned the ipod off and on. No luck yet. I've been working on it for hours now. About ready to sleep on it...maybe some luck will find me tomorrow...
Still in need of dire help. -
I am trying to change me paymenet method by changing my card, after typing in the card number and expiry dates it will not let me type in the box for the security number I am trying to do this on the computer
Jillfinally ...
1. Logout from all apple devices
2. open "App Store" application on your macbook. Login and change all the details for card.
3. Login in itunes, iphone ... I will see that all the details are already updated automatically.
I've just bought some app from itunes -
Firefox will not open! It worked last night. Please help!
Yesterday firefox was working fine. I restarted my computer to update it and now firefox will not launch. It says in the trouble shooter that its not compatable. How can this be and is there any way to fix this?
Try a reset ie hold the sleep/wake and home buttons simultaneously until the Apple logo appears.
-
Iphone will not sync with iTunes!!!! PLEASE HELP!!!
My iphone has always synced up with my macbook no problem but recently when I plug it in and walk away I come back and the sync bar is half full
and will not go any further. I have tried turing off airport and restarting the phone and comp but nothing seems to work. I have all the most current
versions of software and I don't know why it isn't working. Everything I have read on other forums does not help either. Who can solve this
problem???
I am tired of dealing with this.
Please help..Thank you.nicholasfromfrederick wrote:
I feel that since it worked before with no problem I shouldn't need to disable anything on my mac.
No one suggested "disabling everything" on your Mac, just security apps. The fact that it worked before means nothing - these apps update themselves frequently and what's on your Mac today isn't the same, Also, updates to the iOS and iTunes make a difference.
The problem could be in the phone. Has your phone EVER been jailbroken or hacked to downgrade the iOS or unlock? Did you try resetting (press both home and sleep/wake buttons until the Apple logo appears)? -
My Iphone 4 will not switch off silent .... Please help.
I Updated My IPhone 4 on the 2nd of Jan 2013 and since then it will not switch off silent mode with the switch on the side of the phone , does any one know what i can do or if there is any other way to switch it off silent ?
First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can clear some glitches.
If this does not help, set it up as new device, shown here:
How to back up your data and set up as a new device
If still not luck, you'll have to get it looked at by visiting an Apple Store or contact Apple to get it serviced:
Apple - Support - Service Answer Center -
My itunes will not open on my laptop I have windows 7
Remove SC Info.sidb file
(This applies to Win7 or Vista)
From the Start menu, click Computer.
In the Organize menu, click Folder and Search Options.
Click the View tab.
In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
Click OK.
Navigate to the following location by either typing it into the address bar, copying and pasting it into the address bar, or clicking through the folder hierarchy listed: C:\Program Data\Apple Computer\iTunes\SC Info
Right-click the SC Info.sidb file shown and on the shortcut menu, click Delete.
Right-click the SC Info.sidd file shown and on the shortcut menu, click Delete.
Restart the computer and open iTunes.
Maybe you are looking for
-
hi The system automatically created a free goods sub- item for the order with purchase order number ##LO605-ZA##14. The system runs pricing for this sub-item even though it is free of charge. Later i will give discount r100.but i need to know the set
-
Why won't LP digital booklets open?
hello, i can't seem to be able to open digital booklets when downloaded with the album. I've installed Adobe reader and Ibooks, tried to open the file from folder location, and even deleted the booklet and redownloaded. any advice please? cheers soni
-
Wmi filter in powwershell script
Good Morning, I'm trying to get computers records in my dns server using get-wmiobject : Get-WMIObject -Computer '[DNSserver]' -Namespace "root\MicrosoftDNS" -Class "MicrosoftDNS_AType" -filter "OwnerName LIKE 'computer%'" But nothing is returned. s
-
Hi, Does any one know why in solaris 8 (only) ifconfig device0 plumb issue DL_PHYS_ADDR_REQ ?? and do yo know how to avoid that ? Thank you [email protected]
-
Is it possible to have multipoint topologies with FRoMPLS? In other words, if I'm receiving some Frame Relay PVCs on one physical interface on a PE, can I transport some of them to one remote PE and others to another remote PE? Or do I need to have s