My hotmail was open and I was using on my Mac Air, now it will not open

My hotmail was open and I was using on my Mac Air, now it will not open
What did I do and how do I open ?

The app may not be iOS6 compatible. Have you tried to reset it? HOld down the sleep and home keys, past when you see the red slider, and unitl you see the silver apple. Let it reboot and see if that helps. If it doesn't, then I'd contact Kindle and see when they're going to update their app or if they even know there's an issue. Unfortunately, the burden is on app developers to be compatible with the operating system, not on the OS to be compatible with millions of apps. So it's up to them.

Similar Messages

I switched to mountain lion and from Acrobat pro 9 to 10. now safari will not open pdf files. acrobat preferences says it is trying to use version9 to open and i removed version 9. any ideas?

I switched to mountain lion and from Acrobat pro 9 to 10. now safari will not open pdf files. acrobat preferences says it is trying to use version9 to open and i removed version 9. any ideas?

Make sure you have updated Acrobat X to the latest version 10.1.3. They updated the PDF plug-in in 10.1.1: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_ 10.1.1.pdf#page=4

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D

Using the New Mac Pro (can) - AE will not let me use Race Traced 3-D
Hi, I'm using the new Mac Pro
2.7 GHz 12-core Intel Xeon E5
64 GB 1867 MHz DDR3
AMD FirePro D700 6144 MB
OSX 10.9.2
I'm using After Effects 12.2.1.5
When I attempt to invoke the race trace 3D renderer in a comp, I get this error
"After Effects Error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. (5070::2)"
My preferences are set to use the CPU for Raytraced 3D since I do not have an Nvidia card.
So, obviously there is an issue here in that it thinks I have an Nvidia card.
I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
So my question is, what files can I delete/reset to cause After Effects to no longer look for CUDA files that do not exist on this machine?
I do not have the CUDA control panel in System Prefs, so THAT did not carry over.
Any ideas would be appreciated, thanks!

> I know (or assume I know) the cause for this is that when I set up this machine, I used Apple's migration assistant to move most of my data over from the previous gen Mac Pro which DID have a CUDA card.
Ugh. That causes so many problems.
The first thing to try is deleting the CUDA frameworks from your Mac: Look in /Library/Frameworks for the CUDA.Framework and get rid of it.

Desktop App was purchased by another apple id now it will not renew

I Photo was registered by another Appl ID, now I cannot renew or update the app. I have deleted the app I still can not repurchase or renew the app? Any suggestions?

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept it and the other iWork/iLife applications into your Apple ID, do so.
2. Move them out of the Applications folder(they may need to be put into the Trash temporarily), and then see if you can download them for free from their individual product pages. If you're asked to buy them, see #3.
3. Click here, contact Apple, and wait for a response.
4. Buy them.
(116722)

.pdf I opened on my Mac Air, Lion OS will not print

Sometimes a .pdf will not print on any of my reliable printers. The entire sheet remains white with no print at all. I can't figure our why. Any ideas?

Hi TeresaMM,
Sorry to hear you are experiencing issues with the printer. I would like to help, can you describe for me what the printer is or is not doing. It sounds to me like it is not turning on but I could have misunderstood.
You said you are using the printer with 3 Mac computers so I believe it is setup wireless, please confirm. When you say it doesn't work again, I wonder, do you get an error message on the computer you are printing from, or on the front screen of the printer, maybe blinking lights?
Please elaborate on your description so that I can help identify the root cause and provide you with a solution.
Looking forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I have Chrome, Explorer and Firefox installed on my computer. Rarely use anything but Firefox. Now Firefox will not open. I am having to use Explorer. HELP.

Am using Windows 7 on Gateway DX4200-09.Am working with internet provider. May need to replace modem (it's a router/modem combination). Tricky part is that the other two browsers function fairly well. Just Firefox is dead in the water, refusing to even show its opening page. :(
Am considering uninstalling and just downloading the most recent one. Found the program through Control Panel, but the one listed from my Start Menu - all programs doesn't respond at all. Think it's juist a short-cut??

Hello, You can try our latest version of Firefox, its available [http://www.mozilla.org/en-US/firefox/features/ here]

HT5361 I have Snow Leopard on my late model IMac. I downloaded Mountail Lion and paid for it from the Mac Store. It will not install. It takes me through several pages and then button to install is greyed out. A message that this disc is used for Time Mac

I have a late mode IMac 27" running Snow Leopard. I downloaded Mountain Lion from the Apple Store and paid for it. When I trie to install it took me through the first few pages of installation such as agrreeing to terms and the Lion Page showed up asking where I wanted to intall Mountain Lion. The install button was greyed out. I also had a message this disc is used for Time Machine. I had no other disc to choose from. Time Mahine was in the OFF position. I tried hooking up an external drive and tried using it as th Time Machine Backup. That did not work and it also said this disc is used by Time Machine. I have read of several other cases like this but have found no solution other than doinh a complee wipe of the hard drive and doing a reinstall which I really want to avoid if I can.

Look at the root of your hard drive for a folder called Backups.backupdb.
Or, a sparse bundle disk image for one of mobile computers that might have tried to back up to your Mac.
If you have those, remove them and try again.

Mavericks was fine for a while but now it will not start up, any ideas please?

I get a white screen with apple logo, revolving disc and bar. once the bar reaches the end the MacPro switches off. ican do a safe start, the HD appears to be OK so I have tried to re install Mavericks but I get as far as selecting disk , the alternatives are HD and startup but both are locked. There is anEPI disk but that needs journaling via Utilities which does not seem to work. Where am I going wrong? Has anyone else had this problem?
I upgraded from Snow Leopard.
Thanks for that
TA

Thank you I have just tried this and after the attempted repair, I got an error and alert message that Live file system repair is not supported. Tried to repair the HD, volume was repaired, it stopped at Boot with the message: disk Utility can't repair this disk back up files, reformat disk and restore files. I guess this my answer.
Thank you for your help
TheresaAlexandra

I am an online student and the school uses the cloud system, however, the ipad will not allow me to post a reply, anyone got an answer as to what I need to do to change this? Yes, the icloud is set up on my iPad. It is frustrating, that I cant do this.

I cannot respond to my online school who uses the cloud system and my cloud on my ipad is turned on and I have the proper IOS. What is the problem?

Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS

I cannot launch mozilla. I installed v6 on my new laptop and it worked fine for several weeks. Now it will not launch

I cannot launch mozilla, regardless if I click on the icon or type it in.

if the wifi router is set not to broadcast it's ssid one needs to manually type it in
other options and troubleshooting could be
* update the routers firmware
* try connected it by ethernet

I have used Photoshop CS2 for over 5 years with Dimage A2 using the RAW forment, Now it will not work. Any answers out there? Thanks

The Photoshop has always worked well with the Minolta DimAge A2 using the RAW format. Now, it will not. Strange that Corel Paint Shop Pro X2 Ultimate works fine and cost less tha $100... Any responses out there about that?

They may know more in the Camera Raw forum.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud. For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to

Recently when opening up Photoshop, my Adobe CS6 Master Collection pops up saying there's some kind of offer going on the Creative Cloud. For awhile I was just able to close out of it and go about my business on Photoshop, but now it's not allowing me to open Photoshop unless I sign up/pay. I'm quite confused? I really NEED to have access to Photoshop ASAP.

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !!

i recently buyed totally unlocked sprint iphone which was legally contract free and i am using that phone in india but i am not able to send sms .everything is working fine except sending sms. i have tried everything plz help me !! i have tried everything i.e. reset iphone /hard reset/network setting reset /sms service no i have also changed but i am still not able to send sms.. please help me as i am really worried .. thank you !!

I had the same problem. Kept getting message of waiting for activation or check network connections. I also tried every solution out there and nothing worked. This did though: I download the newest version of itunes (through Internet Explorer - Google Chrome wouldn't work). It pulled in my entire library thank goodness and then I plugged my iphone 4s into the computer. I let itunes find it, did a complete backup in icloud, then did a restore. Entire process took a couple of hours, but I now have imessage and facetime back. I was about ready to give up on Apple and go get a different phone ~

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no change

Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

My hotmail was open and I was using on my Mac Air, now it will not open

Similar Messages

Maybe you are looking for