My house has a wired ethernet to many rooms. Can I have my imac connected via ethernet (then to router via comcast cable modem) and also have my airport extreme connected to another outlet?
Not experianced in networking. Current working setup is wireless network with airport extreme. Having problems with signal so may need to expand network with another airport. My house has a wired ethernet to most rooms. What is the best approach to maintain wireless network and also use ethernet wired connections where convienient?
I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260
Similar Messages
-
Connecting AX and ethernet wire to cable modem (and ARD).
Hi all,
This has to be easy, but after 10 minutes of searching, I can't readily find the answer.
I have a cable modem (with one port) which works with my Macbook just fine. I plugged in an Airport Express (and used wireless only) and it works fine also, EXCEPT:
When using Apple Remote Desktop (the latest version) to control the Macs at my office, the status of all remote Macs is: Screen Sharing. When I connect to a remote system, I can see and control that Mac, but I can't copy anything either way (from remote to local or visa-versa).
When connected to the cable modem with an ethernet cable, everything works fine.
SO, I would like to connect maybe a 3 port hub to the cable modem and use both the ethernet cable and the AX (for other computers & iPhone) at the same time. Will this work? Can someone suggest a good hub/switch for this if it does?
Secondly, is there a way to use ARD on a wireless computer? It would be nice to go to a hot-spot and control my remote Macs.
Thanks.
mike p.SO, I would like to connect maybe a 3 port hub to the cable modem and use both the ethernet cable and the AX (for other computers & iPhone) at the same time. Will this work?
No. You need a router not an Ethernet hub (or switch). The AX can't do the job because it only has a single Ethernet port.
Secondly, is there a way to use ARD on a wireless computer?
Sure. It works just like any other computer behind a router. You must configure the computer to be at a fixed IP address and then forward/map the appropriate ports through the router to the computer. -
How do I set up airport on my macbook pro (wired with ethernet to a cable modem) and the wifi settings on my ipad2 to enable the use of wifi on my ipad?
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8156.html
-
I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone). Any suggestions?
It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
Also download the new utility.. with the old style.
http://support.apple.com/kb/DL1482
If you happen to be on Lion.
Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router. -
I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
FrankThanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup. -
Replace the hard disk has, and also have lost the OS disk.
Replace the hard disk has, and also have lost the OS disk.
Reset on my computer to install the program instantly,
Is there any way?
Thank you.If I follow you correctly, you either have or will be replacing the hard drive in your iMac. You don't have the original OS X disks nor an operating system disk. Do you have a bootable backup? Here are some steps/options:
1) If you have a bootable backup, install the hard drive, boot from the external hard drive, then use SuperDuper or CCC to copy the external hard drive to your new internal hard drive.
2) You have your old hard drive, and it's not dead. Put it into an external case and see above.
3) You don't have either a bootable backup or a working old hard drive. You can try calling Apple Support to see if they still have the original OS X disks for your system. If they do, they'll charge a nominal price for them.
4) You checked and Apple no longer has disks for your system. You can go to the used market to buy Leopard 10.5 disks. If you do, be sure and get retail black-faced disks, but don't get the black-faced disk which is an upgrade disk .... if you don't have 10.4 on your system, it won't work. Careful of gray-faced OS X disks as they are locked to the original system type they ship with. So a gray faced OS X 10.5 disk for a MacBook won't work on your iMac.
5) Another related option is to buy 10.6 Snow Leopard, if your system meets requirements. This is still sold by Apple, and in the US is available online for $29.99 from the Apple store. Snow Leopard requirements are:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
6) Or you could consider Lion, via the USB stick that is sold in Apple stores. Lion requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory (4GB recommended)
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Hopefully I haven't totally misunderstood your question, and answered something you weren't asking! -
I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.
Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.
-
Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.
This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
In other words, you need to have two Apple AirPort routers to extend a wireless network.
When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection. -
My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?
Wirelessly
Just select the option to make your AirPort Express join an existing network in the setup process -
Should Iplace my ethernet switch between cable modem and airport extreme?
I'm looking for the best placement of an ethernet switch in my home network.
Should I place it "between" my cable modem and my AEBS or connect it to the output from my AEBS?
The current placement is connected to one of the AEBS outputs.
I'm attempting to set up an old AE (802.11 a/g from 2004) with a different network name than my home network, that I'm trying to set up for a college dorm network and each time I plug the AE to the switch to confirm its functionality, my network gets a little confused.
Help appreciated.
Regards,
jim P.Should I place it "between" my cable modem and my AEBS or connect it to the output from my AEBS?
This all depends on whether you have a simple modem.....or.....a modem/router or gateway combination device.
If you have a simple modem, you cannot place the switch between the modem and the AEBS. The reason for this is that the modem can only deliver one valid IP address and it will be a matter of chance as to which of the devices connected to the switch receives it. The other device connected to the switch will not be able to access the Internet.
If you have a modem/router or gateway type of device, you can place the switch after the modem/router and before the AEBS if you wish, although there is really no advantage to doing so unless this makes things easier for you in terms of hook up.
If none of this makes much sense at all to you, leave the switch in its current location connected to one of the LAN <-> ports on the AEBS since that setup will work correctly no matter what type of "modem" that you might have. -
I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!
The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points. -
one of my ipod apps has frozen on waiting, I've tried everything. (Restarting it, plugging it into the computer, in setting etc...) and also I tried deleting it, but no "X" comes up. but nothing is working. Really annoyed. :( please help. ,
See:
Downloading apps stuck on waiting...: Apple Support Communities
\Waiting applications: Apple Support Communities -
ever since i updated to ios 8.3, my imessage has been on "Waiting for Activation" Please who can assist? i have reset the network settings and also have restarted the phone.
same problem here
-
I was working yesterday afternoon when the wifi suddenly went cold. Initially on the MacBookPro and on the ethernet connected PC. I reinitialized modem and TC through the mac and then the ethernet on the PC worked again and has since.
I've reinitialized both the modem and TC many times, as well as checked the cables. Moreover, I've tried to renew the DHCP lease, provide the DNS servers manually, erased all networks in Network preferences and in KeyChain etc. but nothing seems to work.
One strange thing also happened. I had two networks created, one for me and one I created for guests. The latter one just vanished, dissapeared without a trace.
I've tried from the café down the street and the Wifi worked perfectly well though a little slow, but that could be their connection not the Airport. Therefore, my I deduct that there is either something wrong in the TC or something went wrong in the network settings in the Mac. But that doesn't help to move forward and fix the darn thing.
The only thing I haven't done is completely reset the TC, but after reading a couple of help threads on different forums I'm confused as to how to proceed to get it back to worrk? Has anyone had the same or similar issue and found a solution?
ThanksEh la Pastenague! Je savais que tu était léthale pour l'homme mais ce sont pluôt les machines à pommes qui devraient te craindre. Merci! Solved.
For future reference.
My TC is a 3rd gen.
I actually had to reset to standard defaults not only once but twice. The first time I simply returned to my old profile but that only led to the same message error on the network settings (i.e. IP by default, cannot connect to the internet). Therefore the second time around I kept my profile as backup and re-created a new one plus a guest one.
The airport utility then signaled to issues remaining:
1) Internet access was cut - this I solved by simply reseting the cable modem
2) There were no DNS Servers - I simply copied the ones I had from the previous setup and it worked
I did have AppleCare....
I'm online again and I hope for good.
Thanks a lot
PS. a small tip - I made captures of all my settings in Network settings, Airport Utility and Network utility using Grab in case of ... if anything it is just handy to get back settings that your are missing when setting up a new configuration
Maybe you are looking for
-
Hi all, I'm need to specify a mask to a Sender File Adpater that prevent processing files that contains ? on the file name, example : FileABC??.txt Is possible to use regular expression or a advanced filter to this? Because if I put ? on Exclusion Ma
-
White default background color in indesign pdf file
When I export in indesign cs6 pdf file (I made a digital flipbook and I want to upload it on my website) there is a white default color in the background. Is there a way to get rid of this white default color or make it transparent in indesign?
-
I can't delete shared photostream folder
I have several shared photostream folders and have used this feature a lot. However, one of my folders appears to have a glitch. I cannot delete from either my computer or iPhone. I am not sure what caused it. I am listed as the photostream folde
-
Is there an application that will copy the content of a usb secretly?
for example if i plug in a usb to my computer. and i want to copy all of it's content. without telling it to anything. and another that will speed up copying the content of a usb?
-
Error 2755 - Will not download iTunes - Please help
My two daughters got iPod Shuffles for Christmas and all I get is two hours on the computer trying to download iTunes. Every time I try to download the software I get the following message: The installer has encountered an unexpected error installing