My hp 2000 2209 is not staring

My hp2000 2209 is not starting but the led glows for sometime

Hi,
Try the following
First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the PC.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the PC again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

  • HP 2000-2209 TU - drivers for Windows7 64bit

    Hi,
    I have recently installed Windows7 (64bit) on my Laptop HP 2000-2209 TU.  Since then my Wifi/ Wireless network  is not working. 
    I tried to download it from the Hp website, but they have drivers for Windows8 only.
    Could you please help me to resolve this issue?
    Thanks in advance
    Baiju

    You're very welcome.
    You need these drivers for the devices you listed...
    Ethernet Controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104622-1&cc=us&dlc=en&lc=en...
    Network Controller:  See my instructions below.  I need more info on that.
    PCI Device:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127099-1&cc=us&dlc=en&lc=en...
    PCI Simple Communications Controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104495-1&cc=us&dlc=en&lc=en...
    SM Bus Controller:  Install this driver first and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104727-1&cc=us&dlc=en&lc=en...
    Wireless card (Network Controller):
    I will need you to perform a simple set of clicks in order for me to identify the model wireless card that needs the driver.
    Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category.  The network controller device will have a little ! mark next to it.
    So, find the network controller device, click on that and then click on the Details tab.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that list and select the second item (Hardware ID's).
    Post the top string of characters you see in the window.

  • Hello, i have a problem with my macbook air. When i try to open my iPhoto i should wait about 3mins to get opened it and also in it just appeared around 57000 photos! in which i have 2000. they are not mine, the photos are pics of other people or things

    hello, i have a problem with my macbook air. When i try to open my iPhoto i should wait about 3mins to get opened it and also in it just appeared around 57000 photos! in which i have 2000. they are not mine, the photos are pics of other people or things

    If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Distiller 5.0.5 and Office 2000 - creating pdf not working

    I am using XP Home Edition SP2, Distiller 5.0.5, and Office 2000
    Can not make PDF with 2000 WORD or 2000 EXCEL.
    - WORD: file > print > Distiller results in the conversion hanging up.  The file can not be deleted from the print que until the computer is restarted.  I can not create a postscript file by unchecking the "don't send fonts" check box and check "print to file".  Doing so results in a "prn" file.
    I can create PDF with PUBLISHER if I create a postscript file by unchecking "Dont sent fonts", checking "print to file", adding "ps" at the end of file name, then clicking on the ps file, does result in a pdf file
    I can create pdf files with file > print > distiller in PhotoShop and PaintShop Pro

    After creating the PRN file, open the file in Distiller and see if you get a PDF. If so, then look for AcroTray running in the background. If not, then you need to start it (it is in the Acrobat 5/Distiller folder).

  • Microsoft Comfort Keyboard 2000 "n" key not working

    First off any n
    that I type is copy pasted.
    I bought the Comfort Keyboard 2000 less than
    5 days ago and already the n key
    has stopped working.
    I am using Windows
    7 64 bit and all other keys on the keyboard
    work perfectly fine. All I could find
    help for were the non-character keys.
    This is very disappointing to me because
    of the short amount of time it took for this product to stop functioning.
    Thank you if you can
    help.

    Hi,
    I suggest
    removing and reinstalling the device driver.
    http://www.microsoft.com/hardware/en-us/d/comfort-curve-keyboard-2000
    If the issue persists, it is recommending contacting Microsoft Hardware support and let them examine the hardware.
    http://www.microsoft.com/hardware/en-us/support
    Best Regards,
    Niki
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • RE 2000 Range Extender not connecting, This is my 3rd return.

    I've returned this RE 2000 twice and have received my 3rd. one. I'm done! It does the exact same thing every time. Works great at first then failure. The light constantly blinks and is not recognizable by the router. I even upgraded my Linksys router to their top router for home and the extender still does the same thing as the replacements. I still have a RE 1000 single band that has and continues to work fine. The RE 2000 has serious design flaws. I did all the steps the others did without writing them all out, i.e. Direct connect with cable, reboot, restarts, re-installs. No matter. Going with the Amped REA 20. So long Linksys.

    Tech support ran me through all of that before they would authorize a return.  I mentioned that I tried a direct connection.   I also mentioned that I have the RE 1000 that works just fine, it always has.  The RE 2000 has some sort of issue that I've noticed in all three replacements.  The Linksys tech support and I went through exhausting measures to rule out everything.  I'd end up getting a RMA# to return it and they'd send a new one.  WORKS GREAT FOR A COUPLE DAYS THEN IT ISN"T RECOGNIZED.   All my networking equipment is Linksys/Cisco.  How about a product recall for the RE 2000.  

  • HP 2000 Notebook Screen not working.... Still

    I have an HP 2000 Notebook that is running windows 8 64 bit and the screen on the laptop will not work.  When I turn on my computer, the screen won't show but the fans and everything els will work as normal. The capslock button does blink in a 2 blink series, which according to HP means bios error, but I believe that is not the proublem. I have tried to fix this proublem by all of the following:
    - Holding the winsows key and b, then pressing the power button (for one second) which should direct me to my bios update but it doesn't becuase i still can't see anything 
    - Switching the ram into different slots, I have 2 sticks of 4 gigs, I have also tried just one stick
    - Taking out the battery and unplugging it and holding the power for 60 secconds and plugging it back in... multiple times (Getting rid of extra charge)
    - Checked if the black light was dead but it wasn't becuase normaly if you take a flashlight to the screen you can still see it slightly but I can't see it at all
    The weird thing is, is that I can plug it into an external monitor and it will work. Also every now and then the screen will work for about a day but then the next day it won't work again. I even tried calling HP, but for them to talk me through it and try to fix it, it cost $75. 

    Hello, @jiddy30 
    Welcome to the HP Forums.
    I understand that you're having issues with a black screen on your notebook. I will try to assist you with this.
    As you're troubleshooting led to trying an external monitor and that is working, the issue is more then likely with the actual notebook display itself. I would guess with it working at times, it could be a loose wire in the display. It could also be the display.
    If you're comfortable you can check this yourself, Maintenance and Service Guide - this has visuals and instructions on replacing components. It also works as a guide when it comes to opening a notebook to just check wires and components.
    I hope this can help some.
    Thank you for posting on the HP forums.
    I worked on behalf of HP.

  • Ever since the latest version of Mozilla updated, my computer has been moving ultra-slow, probably because my computer is so old and only has Windows 2000 on it - not even XP. I don't know how to uninstall this version and return to the previous one.ng

    The latest version of Mozilla is probably not compatible w/ my computer and operating system. The computer is 10yo, and the operating system is Windows 2000. How do I uninstall the new version and return to the old version?
    Thank you!

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • SCXI-2000 chassis does not work.

    Hi, I'm trying to configure my SCXI-2000 with a SCXI-1200 and SCXI-1121
    modules. I read in the notes of NIDAQ, that I would have to reprogram that
    chassis with the rscxi.dmg file. But the system just tell me that can't
    reprogram the chassis. I'm using a remote system, with an RS-232 null cable
    modem., windows 98 and version 6.0.1 of NI-daq.
    Please I would be very grateful for any tips.
    It's my final project in the university.
    Thanks.
    Jose Luiz - Rio de Janeiro.Brasil

    Jose,
    Without looking into your problem too deeply, I would suggest visiting our
    SCXI troubleshooting page, which can be found by following links through ni.com
    >> support >> daq help >> scxi help .
    The direct link is as follows; these pages are pretty robust with
    install/config information:
    http://www.ni.com/support/trouble/daq/scxi/
    Regards,
    Rich
    NI
    Jose Luiz Lires Domingues wrote:
    > Hi, I'm trying to configure my SCXI-2000 with a SCXI-1200 and SCXI-1121
    > modules. I read in the notes of NIDAQ, that I would have to reprogram that
    > chassis with the rscxi.dmg file. But the system just tell me that can't
    > reprogram the chassis. I'm using a remote system, with an RS-232 null cable
    > modem., windows 98 and version 6.0.1 of NI-daq.
    > Please I would b
    e very grateful for any tips.
    > It's my final project in the university.
    > Thanks.
    > Jose Luiz - Rio de Janeiro.Brasil

  • Cannot install Netweaver CE on Windows 2000 OS - SAP note says I can!!!!!!

    Hi ,
    I cannot install Netweaver CE on Windows 2000 OS, but SAP note says I can... Can anyone reply back if there is any workaround?
    Thanks
    Som

    Hi Som,
    Netweaver CE is supported by following Windows series:
    Windows XP Professional (Service Pack 2) or Windows 2003 Server (Service Pack 1)
    The version has also been tested successfully with Windows 2000 (SP3) and Windows XP (SP1), but is certified only for the two Windows versions above (Note: If you use a Windows XP account without a password , SAP Management Console can not start/stop your instance via Web Service - use system services instead)
    For more on Netweaver CE installation check this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1011818d-1abe-2910-5897-f72eb59c951a
    Regards,
    Subhasha

  • Have windows 2000 get message not found line underneath nginx

    I use windows 2000 trying to get on to google get a message saying file not found then a line underneath this with the letters nginx. Need help am not a computer person at all.

    You are using a 2 1/2 year old version of Firefox, which isn't supported any longer, you need to upgrade to a newer version - either 3.6.23 or 7.0.1.
    http://www.mozilla.com/en-US/firefox/all-older.html <br />
    http://www.mozilla.com/en-US/firefox/all.html
    You are also using insecure, outdated plugins, see this: <br />
    https://www-dev.allizom.org/en-US/plugincheck/

  • Nvidia Quadro 2000: DisplayPor​t not working

    Hello,
    I have a brand new S30 with a Nvidia Quadro 2000 card (latest drivers from Nvidia installed). Output to one display (LT2452p) through the DVI port is ok, but the display stays blank when connected via any of the the DisplayPort outputs. Since I want to attach 2 displays, I need to use the DisplayPort connectors...
    Any hint on how I could check whether the graphic card itself is faulty?
    Thanks in advance!
    --Pierre
    Solved!
    Go to Solution.

    Hello pierrech,
    Can you use another Display Port cable and another Monitor with a Display Port input to make sure it's not the monitor or the cable? If that doesn't work, the graphics card (possibly the system board if the graphics card is welded onto it), will need to be replaced. I hope that helps.
    A+ Certified

  • CUCM 8.6.1.2000 - Call History not logging, and no ring tone access.

    Hello,
    A little background:
    Recently, I setup a UCS C-210 M2 with CUCM 8.6.1 and restored our Pub and Sub to it. Also migrated to from physical Unity to Virtual CUC, same with Presence.
    I've also setup a 2nd CUCM Sub, as well as new CUC and CUP subs on a second UCS C210. I also upgraded CUP to 8.6.4. before adding the Sub CUP node.
    I'm thinking my problems began when I added the 2nd Subscriber CUCM node on our 2nd C210. Here is a description of what's going on.
    -  I cannot change ring tones on an IP phone. I get "Ring List Unavailable" when I try to change a ring tone. I noticed that my phone had changed over to the CTU ring tone around the time I brought up the VM environment. The CTU ring tone was a custom one I had loaded at one time.
    - I cannot access any call history on my IP phone. My Jabber client logs call history just fine.
    Seems to be a TFTP issue, but I restarted the Cisco TFTP service yesterday, and it did not help. I also reset the Device Pool, which didn't seem to do anything.
    Also, I'm still a bit unclear on which services I should be running on my new Subscriber node.
    Any help is very much appreciated. Thanks again, guys!!
    -Jonathan

    I had this issue and resolved it. The problem was that we had changed DHCP servers over to a different platform and the new DHCP server didn't have Option 66 defined to point the phones to a TFTP server. Once we re-specified the TFTP server IP's for option 66 in DHCP and reboot the phones the issue was resolved.

  • HP dv3-2000 audio service not start after i run uniblue powersuite. event log says can't find path.

    after i run uniblue powersuite to clean up my registry, speedup my pc and update my drivers, I cannot start my dv3-2000 laptop. After I updated the BIOS, following the suggestion on the forum, I can get the vista start but no sound. I then checked the event log which says the audio service cannot start because it can't find the path specified. How can I solve this problem?

    If the printer is connected USB to the Windows 7 machine, what you can do is share it to the network (assuming the XP computer is also connected to the same network). This way the XP machine can see the printer on the Windows 7 computer and install it. The only drawback is that the Windows 7 computer will need to be powered on for the XP computer to be able to see and print to it. I have linked a third party site below for instructions on how to do this.
    http://www.howtogeek.com/howto/windows-7/share-fil​es-and-printers-between-windows-7-and-xp/
    Binary_Zen (worked at HP )
    Click the white Kudos star to say thanks
    Please mark Accept As Solution if it solves your problem

  • Tx2 1340 ea not staring NO BLINKING LIGHTS. HEEEELLLP please! Do you know why????

    Have two of these both about 4 years old. One began not starting about 18 months ago but removed one ramstick, updated chipset and all was OKish with infrequent shutdowns for unknown reason.  Occasionally i would need to reseat the ram in the bottom holder.  Now it will not start at all.  Light by ac adaptor input illuminates.  Have reseated ram, tested hard drive, removed and replaced the cd drive, held the reset button, removed and put back the cmos battery and tried starting without battery and hard drive.  When sliding the on slider, lights come on for half second, hard drive clicks the everything goes off.  All was working well when I last shut down.  The laptop then went for a ride in my car, all warm and dry, no great bumps and would not start next time.  This has happened before but was sorted by ram reseat.  Before last shutdown I also ran ram and hard drive test and left on overnight to check all OK.  Have also swapped a ramstick from my other 1340 as well as trying its power cord.  no joy; complete mystery.  Have also tried starting at various angles in case something is loose.
    Any suggestion would be welcome please.  thanks for looking and your help.
    Mike.

    Forgot to mention. I have always run it without a battery. Tried all the above with no battery. Have just attached one in case it makes a difference; I know it will not!!

Maybe you are looking for