My HP 2210 all-in-one printer is not faxing? could I get a new disk to reinstall it so fax will wor

I have had my HP 2210 al-in-one printer for good many years and worked just fine.  Now it is not faxing, it say's it is not connected.  I have no idea how it got disconnected?  I will need the window XP to reconnect it.  I had my brother in law install every thing and we cant find the disk?  Could I get a disk for the printer and a book so I could reinstall it all  and have it working again like it did?  Please get back to me and let me know if that is a available to me.  My e mail address is
[Personal Information Removed]  My Name is Rosa England

Hi MackFarland,
I see that you're having problems with your printer.  I would take a look at the document below.
Printer Offline
Let me know how it goes. 

Similar Messages

  • My 2210 all in one printer keeps giving the message "Remove and check cartridge"

    My 2210 all in one printer keeps giving the message "Remove and check cartridge." Although I go through procedures outlined in manual, message keeps reappearing. Suggestions?

    Hello again!
    Still having problems but here's more info: Checked "Resume" but  Message next to the job says ERROR but that 'Pinter is ready'.
    However, on the PRINT & FAX page in System Preferences it has 'Idle' next to the psc1317 (default) printer.The computer scans the document but wil not print it. With printer off I disconnected the power cable and the USB from the computer then re-connected after 1 minute.  When I turned the printer back on it printed the test sheet but not the document.  I have also unistalled then reinstalled the hp1317 Snow Leopard software and driver and computer says that all software is up to date. Apart from a dodgy connection I have no idea where to go from here!

  • Buy a new hp deskjet ink advantage 3545e all-in-one printer through online portal. how to get the

    Regarding a new hp deskjet ink advantage 3545e all-in-one printer through online portal.
    how to get the free cartridge . do we need to register somewhere to get it. Any specific condition to get it.

    Hi @kandas1,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Need help . Bought original HP 21b ink for F370 all in one printer , its not printing

    Hi , 
    Need help . Bought original HP 21b ink for F370 all in one printer , its not printing at all .Kindly mail at [Thank you for visiting the HP Support Forums. I am sorry to inform you that your post has needed some editing to remove personal information.]
    . Thanks .

    Hello @Bn23 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're running into print issues.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Also, when you print, does a blank page come out, or does no paper feed through the printer?  Is there any errors that come up?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP TouchSmart 600 and HP psc 2210 all-in-one printer

    Hi SiobhanF,
    I just registered and this is my first post.
    I recently bought a new PC...an HP TouchSmart 600.  My printer is a HP psc 2210 all-in-one.  I need advice on whether the two are compatible and if so how to get them working together.
    Thank you,
    waj

    This is likely caused by the failure of one of your cartridges.  Remove the black cartridge and print a test page.  Does the printer print at normal speed?  Is so the black cartridge was the issue and should be replaced.  If not then put the black cartridge back in and remove the color cartridge and print test page.  If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP PSC 2210 all in one printer - slow printing

    I have had this all in one printer for several years.  Just recently I attempted to print two pages from a PDF file and it took over 1 hour to print.  At first I thought it was the PDF but now I realize it is with anything I try to print.  I went through all the troubleshooting steps and none of them have fixed the problem.
    I have a Dell Dimension 8400 Intel Pentium Computer,  Windows XP 4 cpu 3.20 GHz, 3.19 GHz, 1.00 GB of Ram.
    It will begin to print but then it will take at least an hour to print 1 page.  I have already uninstalled, re-installed, etc...
    This question was solved.
    View Solution.

    This is likely caused by the failure of one of your cartridges.  Remove the black cartridge and print a test page.  Does the printer print at normal speed?  Is so the black cartridge was the issue and should be replaced.  If not then put the black cartridge back in and remove the color cartridge and print test page.  If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

    I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
    Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
    I have tried all the solutions provided on the HP website but none of them worked.
    I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
    If some genius can help me I will pray for him/her that all his/her wishes come true.
    Thanks you in advance.
    Imroz Baig

    I just got my HP Deskjet F2120 working in Windows 7.  Here's how:
    Insert the setup disk in your CD/DVD drive.  Choose to view the files in Explorer.  Scroll down to the file "Setup," which is identified as an application.
    Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
    Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
    ALSO check "Run this program as administrator" at the bottom of the window.
    Press "Apply," then "OK."
    Now you can double-click the "Setup" file and run the software installer.
    It will 100% work inshallah...

  • C5288 all-in-one printer is not scanning.

    My C5288 all-in-one printer was working nicely.  However, for the last one month, I am not able to scan on the machine. The driver has been uninstalled completely and re-installed several times.  When the installation is being completed, a fatal error message is getting appeared - no error number is shown.  When Hp Solution centre short cut is clicked, it is showing a message "no HP device have been found".  I can print, but no scanning is being done.  This clearly shows that there is something wrong with the OCR portion of the software.
    Can you kindly guide me to solve this problem. [text removed for privacy]
    Regards:

    Hi PhoeYiin,
    If you have not installed the full feature software and driver already, you will need to do so in order for the printer to see that computer. Please use the following link to download the necessary software; HP Deskjet Ink Advantage 2520hc All-in-One Printer Full Feature Software and Drivers.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • All in one printer does not scan.

    All in one printer model:  HP Officejet 4500 G510n-z
    Computer:  HP 2310 Series Wide LCD monitor
    The scanner does not scan.  I think it is not connected or set up and there are no instructions in the manual.  The printer and copier work fine.  I ran HP Print and Scan Doctor and it could not detect a scanner.  What can I do?

    What OS and how's the printer connected?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

    Last week I understood that my Printer does not print at all yellow color.
    All other colors and tests I made are ok.
    I cleared printheads, made all printing tests, and diagnostic pages.
    In every printing was missing the yellow color..
    I changed the yellow catridge with another full one, and the problem persists..
    PLS could any body help me?
    Many tks
    antpep

    Welcome to the community @antpep
    I understand your Officejet Pro L7680 is no longer printing in yellow for you, and I'd like to offer my suggestion that may help you!
    Please click on the link below and try the steps in the guide.
    Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Se...
    If the yellow is still not printing for you and you reach the step to "replace the printhead", please consider contacting HP's technical support to see what your options may be with them in regards to a replacement part or unit.
    HP's contact info:
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Have a wonderful weekend ahead and thank you for posting in the community
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Photosmart C3180 All-in-One printer -- SCANNER not working.

    I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
    If I can get any help from others I'd appreciate it!

    HP provided this link to software which resolved my scanning issue.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

  • HT4356 why HP Deskjet Ink Advantage 3525 e-All-in-One Printer is not compatible with AirPrint?

    I have issues with wireless impresion in my MacBook pro. I bought an HP Deskjet Ink Advantage 3525 e-All-in-One Printer (CZ275A).
    http://h10010.www1.hp.com/wwpc/jm/en/sm/WF06b/18972-18972-238444-410635-410635-5 165506-5162510.html?dnr=1
    Why HP Deskjet 3525 is not compatible with AirPrint? Is for Mountain Lion?
    Is there any solution?
    Thanks!

    Thanks!
    When I installed the software I had an issue with the compatiblity between my printer and mountain lion. I installed a mountain lion's update related to HP Printers but it wasn't succesful. At any rate I set up the printer and and wireless print works only once... after this I used the USB connection.
    I have no idea what happens and it's so weird because HP webpage says thar 3525 is compatible with AirPrint...
    Thanks for your help!
    Greetings from Chile

  • HP 7520 all in one printer does not print photos well-Does with my Windows machines

    I have several computers.  Everything works great with printer in Windows environment.  I have an iPad and a MACbook PRO with Maverick 10.9.4.   The photos are terrible when I print with either of these devices.   It almost looks like a negative image.   I have checked for updated drivers, etc for the MAC.   The ink is HP and the levels are good.  It works fine with my PC computers, but not my Apple devices.   I have checked system preverences in the APPLE.   It appears to be only the photographs.  Text prints fine.  Any suggestions?
    This question was solved.
    View Solution.

    Hello cpsimon, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you're running into photo print issues. I would like to help!
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps.
    After the updates, I would recommend reinstalling the HP Photosmart 7520 e-All-in-One Printer Drivers.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums! 
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Deskjet Ink Advantage 2515 All in One Printer is not working

    Please help me to fix my HP Deskjet Ink Advantage 2515 All in One Printer. Before it is ok to use it, but after a couple of months when I dont have an ink I didnt use it. As of today I have an important papers to scan but when I try to plugged in the outlet my printer power is off but the two lights in fit to page are on and also the attention light is on. I use to plugging it again on and off from the cable wires but still the same case. I try to push the power on but it doesnt work. Please help me. Thanks in advance. :-(

    Hello Folks,
    Welcome to the HP Support Forums! I understand you are not able to print to your HP Deskjet Ink Advantage 2515, the power button is non responsive.
    I would like you to start troubleshooting here: The HP Printer Does Not Turn On or Respond When the Power Button is Pressed
    Please let me know the outcome, I will watch for your reply.
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP Photosmart 6510 e-All-in-One Printer Does Not Print Black Ink

    I have run all the troubleshooting listed from HP and the "check" warrenty doesn't come up blank.  I would like to not have to purchase a new printer to fix this any help would be greatly appreciated:
    1) Rebooted Printer
    2) Installed new printer cartridge (2nd one) - really not happy about this as that represents almost $50 in HP ink
    3) Checked venting - Not the problem
    4) From Tools ran head cleaner - still only prints colors (or grey)
    I've liked HP printers for a long time, but after reading the forums I'm really seeing an issue with the model I puchased.  I don't mind purchasing HP ink and my printer isn't a high volume use printer so I expect it to last beyond 1 year 1 day.
    I have the SN and product number available if a tech needs.
    Chris

    Hi @crfldf 
    Have you completed all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages.
    Although I hope this resolves the issue, it might not. If the issue persists, please post back with your warranty status. Use the following link to check your warranty.
    If your printer is still in warranty, please call HP and explain the issue you are experiencing. The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    If your printer is out of warranty, let me know and I will do my best to help. Thanks. I look forward to hearing from you.
    If I hear back from you and you require further assistance, I will send you a private message to gather some information. If I send you a message, you can click the little envelope on the top right hand corner of the forums page to check the message;
      - In support of Movember
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • Can't edit part of someone else's pdf form

    I'm trying to modify a pdf form that was made by a govt agency (why isn't important, it's basically the current example of this occurrence - I've run into this elsewhere). I'm kind of a n00b at this so I've still got alot to learn... The doc has what

  • How to import class in JAVA ?????

    from the website http://java.sun.com/j2se/1.4/compatibility.html SAYS : To summarize, the syntax import SimpleName; is no longer legal. which would import a nested class from the unnamed namespace. To fix such problems in your code, move all of the c

  • Iphone 3GS fails to sync after update of new software

    I just updated my 3GS with the new software. It wont update my applications and says "could not be synced because the sync session failed to start". Someone please help me

  • Master/detail issue

    I have a tricky if convoluted implementation issue and hope you can assist with resolution. I have a form with a master/detail relationship. The master block has a primary key called master_id and the detail block has three foreign keys (caller_id, r

  • HT201441 how can i get into my iphone 5 without  a sim card

    how can i get into my iphone 5 without  a sim card?