My HP 309a all in one printer will not print bar codes like airline boarding passes or tickets.

I use Windows 7 with XP Pro I have received no error messages and have plenty of free disc space. I have not a clue as to what has happened. I see the ticket with a bar code on my computer screen but when I  try to print it the bad code will not print. Any suggestions?

my hp6980 printer won't print bar codes using windows 7 on computer

Similar Messages

  • HP Deskjet all-in-one F4440 will not print

    My HP Deskjet all-in-one- F4440 will not print.  I have put in a new color and a new black cartridge.  It clanks loudly when it moves back and forth.  Finally it stops and then pulls plain paper through as though printing on it - does this two or three times.  then it pulls plain paper halfway through and stops.  I have to tug and carefully pull halfway paper back out towards front to remove.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Hp all in one F2400 will not print!!

    my printer will not print, all it will do is feed multiple pieces of paper through and print nothing and eventually getting jammed also the printer cartlidge goes back and forth making loud noise. i have no idea what could be wrong, it worked fine a few days ago.  any suggestions would be appreciated.

    I would try running the HP Print Diagnostic Utility. Go to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&​...= and see what part fails.
    The PDU checks the connectivity, spooler condition, online status, device manager, print queue, ports, driver, conflicts, and default printer. 
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • HP Deskjet All in ONe L7650 will not print black only --

     Started doing this with previously working black cartridge, updated software--prints, but blank page comes out when set to black ink only; prints other colors. 
    Changed black print cartridge and still will not print black.  Diagnostic page prints other colors.
    Printhead health shows good for all colors.

    What brand of printer cartridges (not printhead) did you use the last time you changed them?  I don't know if it was because one or both of my printer cartrdiges went dry, but I put new cartridges in (not printhead) and it improved somewhat--I kept trying to clean the printheads but it seemed to never get resolved.
    I refuse to have to buy new printheads.  I tried several cycles of "align printheads" "clean printheads" and never got a decent print out, but I did get to the point of all the colors printing although magenta printhead makes printing errors and so I never know what I am going to get with color anymore.  
    It seems to be at its worst when printing in "draft" but in normal or best (with more ink coming through) it seems better--the higher ink volume seems to cover some of the problems with the printheads.
    So, I am justing using it "as is" and not replacing the printheads--because it is a waste and yes, could almost get a new printer for this cost.
    I wish I had never gotten this All in One and just stuck with the old 970 csi and the old UMAX scanner, which was a better scanner, but thought I would "save some space" by getting this since it scans legal, which I needed.
    Just keep trying to reseat the printheads (also trying to reclean them, which seems to make it worse) and keep printing out those "tools" alignment and cleaning procedures.  
    But no help from HP.

  • 6110 All-in-one sometimes will not print multiple copies

    I have had this problem for sometime now. I searched the forum and found the Mopier solution for laserjets, but the 6110 does not have this setting.  The same question regarding the 6110 went unanswered in the only post I found for it.
    I am using the 6110 on WinXP Pro and connected by USB
    Often times when I try to print multiple copies of a document (MS Word or MS Works as examples) I check 2 copies in the selection box but the printer only prints one copy. I then have to click Print again.  What is strange is, sometimes it performs fine and others it will not print more than one copy at a time.  Sometimes it SEEMS that if I change the "collate" checkmark it works, but proper functioning does not seem to be able to be recreated every time.
    I do not get any error messages, the darn thing just acts like I have 1 copy selected rahter than two. I notice that when this happens and I go to print a second copy, the dialogue box has reverted back to 1 copy, but in those few times when it DOES print 2 copies, if I go back and select Print, it still shows 2 for the number of copies.
    Any ideas? Thanks in advance

    Hi there,
    To make sure the software side of the house is in order lets try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My deskjet All-in-one F300 will NOT print copy docs, or from My Docs or attachments

    This printer will only print e-mails or direct from HP essentials screen but nothing else. Ink cartridges are ok.
    Need help ...David Mullin

    Are you printing it directly from a website? what is your computer's OS?
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Cant Print Bar Code on Airline Boarding Pass

    New HP Photosmart--Bar Code is blank, all else prints ok

    I did some poking around online today as I had the same problem as the OP.
    I tried to save the file as a PDF, but it saved just as it printed - no barcode!
    I ended up solving the problem by saving the file as a PDF on a different computer (happened to be my MacBook), emailing to myself and printing the new PDF.
    I think the original problem stemmed from some snafu in the software that interpreted the image of the boarding pass (don't know the proper jargon). Anyway, this worked for me, and I hope this helps! 

  • My HP Photosmart all in one C4480 will not print from PC

    I can't get my printer to print from my computer. Everything shows it's hooked up fine and ready to go. Yet when I try to print, nothing happens! Driving me crazy. Not sure if this is simply a bad printer or what. I've tried everything from unplugging, unhooking, rebooting, reinstalling, updating drivers and everything else. I've run out of ideas. Any new ideas would be appreciated.

    Oddly @FlaBoy34, I did not get a notification that you had responded. I do see now that the issue you were experiencing remains. I suggest calling us to discuss your in/out of warranty options.
    If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. 
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • After installing McAfee encryption on my XP laptop, my OfficeJet All-in-One 7410 will not print.

    I have unstalled the software and now I can not reinstall the software. The diagnostic tool can see the printer, but the install software can not, even when I enter the IP address. I've turned off the firewall. I've connected the printer directly to the router. The only way to use the printer is through the USB which is not acceptable.

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • OS X 10.6.7 Canon All-in-One 480 Printer will not print files, only blank pages. Have to go to Utilities, Disk Utility  and Repair permissions for a temporary fix. How can I get a permanent fix?

    After upgrading to OS X 10.6.7., my Canon All-in One MP 480 printer will not print. it says it is printing, but the sheet of paper just runs through the printer and comes out blank. I finally went online to just answers.com and got a fix involving the System preferences, printer and fax. i was told to go to Applications in the HD, thenUtilities, then Disk Utilities, highlight the HD and check on Verify Disk. If it says Disk is OK, click on Repair Permissions. At first, that worked, but the next time I went to print after turning the printer off, it refused to print and just ran the sheet of paper through blank. Once that happens, there is no way to go back to printing the file that failed. I fiinally had to copy and paste the info from the file that would not print and put it in an email to myself and then print that. This is very frustrating, and I would really like a final solution for the problem.
    bettyfroomneedham

    There's a lot there, so I'll start with the parts I can answer quickly.
    The "ACL found but not expected..." messages can be safely ignored, so says this article
    http://docs.info.apple.com/article.html?artnum=306925
    (look below all the "SUID" examples)
    I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
    Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
    Please post back with the remaining point of concern.

  • My photosmart D110 printer will not print at all wireless or when connected; the printer will copy .

    My D110 Photosmart printer will not print when I want to have something printed from my laptop; I have made sure everything was connected. I have lost the the disk that came with it. Please help the serial# {Removed for privacy}
                                                                       Thank You, Kevin Jackson

    What operating system?  Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Printer will not print most web pages.

    Wireless Photosmart all in one Printer will not print most web pages.  Everything elso prints consistantly but cannot determine why web pages generally do not print.  It soes not seem to matter whether I click file - print or control P  or clicking the print Icon. The print icon appears at the bottom of the screen for a couple of seconds then disappears & nothing prints. Is there a setting I am missing?

    Hi. Go to this link http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&cc=us&dlc=en&jumpid=reg_R1002_USEN&lc=... and download the PDU and run it.
    Feel free to provide Kudos if I have helped you!

  • Printer will not print E-mails

    I have an HP Officejet Pro L7680 All in One printer.
    I have recently re-inatalled all diagnostic tools/software and troubleshooting software.
    As per these it shows no errors.
    The printer will not print e-mails but will print most word documents.
    Can you help?

    My printer will not print e-mails, nor will it print photographs within the body of a document.  
    What am I doing wrong?  I just started having this trouble recently 

  • Printer will not print word documents or documents from internet however does a test print

    My printer will not print word documents or documents from the internet.  However it does complete a test print.  I have uninstalled and reinstalled printer.  I have disabled and enbled the firewall and have run the test doctor programme, which has been unable to identify any problems.  I have a HP deskjet 3050A all in one J611 series printer.

    Sorry that you are having a problem with printing word documents and internet. 
    Are you connected USB or wireless?
    You can try to download an alternative driver and check to see if that works. (Shane_R) has a great post on how to do so. 
    The deskjet 990c is usually the better one. 
    http://h30434.www3.hp.com/t5/Printer-All-in-One-So​ftware-Drivers-e-g-Windows-8/How-to-Assign-Alterna​...
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Epson 777i printer will not print

    Epson 777i Printer will not print
    I am using an imac with the Epson Stylus Color 777i printer,Gutenprint v5.2.3 and also the Epson 580 printer.
    Yesterday the 777i stopped printing.  It is in the paused mode. I have replaced the ink cartridges and have tried to
    perform troubleshooting but, the printer will not respond to any commands.  The green light is on, neither of the
    other two lights are on.
    The 580 printer is working with no problems.
    I need some assistance to get the printer back on line if at all possible.  I am not too tech smart, but can follow
    directions well.
    Fred Holmes
    Lompoc

    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

Maybe you are looking for