My HP 4515 is too noisy for my office. Any advice?
Does HP supply sound enclosures?
Rembrandt,
Did the two updates to Office 2011 get you to 14.3.9? That's the latest Mac version of Office.
I use Office 2013 and Mac Office 2011 on the same machine and have no problems opening any files shared between the two. You followed the instructions for uninstalling and updated your new installation correctly, I have to assume. It sounds as if there is a problem with your cuurent configuration but if it's not an update problem, or an installation problem, I can only direct you to the MS Office for Mac user community -> http://answers.microsoft.com/en-us/mac (sometimes you get lucky and get an actual MS employee answering your question).
Good luck,
Clinton
Similar Messages
-
I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?
Hello honeycrisp70,
For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Regards,
-Norm G. -
My 6-month old macbook air's calendar keeps freezing up. when I open calendar, it displays across the top of the calendar some text I copied for another purpose and which I pasted into a word document yesterday. When this happens there's nothing I can do to escape it -- all commands result in the "thud" tone. So I keep having to force quit calendar.
Any advice?Hi Dylan2412,
According to your description, you'd like to pass the ComboBox.Text to the second form's TextBox.
In Form1:
private void button1_Click(object sender, EventArgs e)
Form2 f2 = new Form2(this.comboBox1.Text); //pass the comboBox1.Text
f2.Show();
In Form2:
public Form2(string s) //get the string;
InitializeComponent();
this.textBox1.Text = s;
You could get the comBoBox refer to this sample above.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Buying computer for Solaris 8 - any advice?
I am buying computer for Solaris 8.0 and would appreciate comments/experiences from ppl who have installed Solaris on Intel platform.
What to buy and what NOT to buy for smooth installation (if that can be done) ... :)
<br>
Anyone managed to install it on AMD systems? Duron? And what to look for there?
Thank You Very Much!If you like building your systems from generic parts, I have had very good luck with ASUS P5-A and P5A-B Motherboards with AMD Processors (Socket 7).
I can't comment on SCSI - but IDE works ok if you are looking at cheap space and not performance.
The NIC and Video cards are trickier though. You might want to warn the vendor that you may be returning it, as the revision of a supported model will sometimes make a difference. -
Sending MacBoom Pro for Servicing.. any advice on back up?
hi all,
i'm about to send my machine in for servicing due to water damage. what is the best way for me to back up my system so i don't lose all my emails, appz and stuff?
i've already backed up my docs and movies but what i really want is for my machine to be exactly as it is when i get it back should they decide to replace it under insurance. any suggestions? i've only got 40gb left of my external HDD. i have an ipod so i've backed up my music there. please help!Your owner's manual will have instructions for removing the hard drive if you have the MBP with the user replaceable hard drive.
Here's something to consider. Do you have another Mac available to use? If so, consider doing this.
Remove the hard drive from your MBP and place it in a firewire enclosure. Also purchase a new firewire backup hard drive, since it sounds like you need a new and bigger one anyway. (Firewire because it's a lot faster than USB.)
Partition and format your new external drive, with one partition equal in size to your MBP's internal drive and any others that you may want. Then download Super Duper onto the other Mac:
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
You will now have your MBP drive in an enclosure, a new external drive, and another Mac with Super Duper on it.
Mount both your MBP drive and the new external drive on the other Mac. Then you can use Super Duper to make an exact clone of your MBP's drive on the partition that is the same size as the MBP's drive on the external drive..
Once you have your bootable clone, you can reinstall the hard drive back into your MBP and send it off. You will have an exact copy of your MBP's drive on your new external. When you get the MBP back, you can clone from the external back onto the MBP. Everything will be exactly as you left it. Even if your original drive is erased or replaced, all your stuff will be saved on the new external drive. just as it was.
I know this sounds pretty involved, but I think it would be worth considering. A bootable clone is a really useful backup tool, and can be used in conjunction with other backup strategies.
Good luck! -
There is no option for personal hotspot on my phone .
Idea is not an officially authorized and supported iPhone carrier - the only supported carriers are Aircel and airtel - so you'll have to try and work this problem out with Idea. Often when using unsupported carriers not all features of the iPhone are usable, and that may well be the issue here.
Regards. -
Getting ready for Firmware updates - any advice?
First a big HELLO to all the regulars!
Second - any advice? Firmware updates freak me out (killed an old iBook once)
many thanks!Trisha K wrote:
all seems to have gone well
just a question, my update reads: "MBP51.0074.B01"
but according to KB article HT3260 it is supposed to be:
"MBP51.0074.01B"
did i mess up?
What you have read has been written incorrectly by Apple. You have installed the updates successfully. My MacBook Pro reads the same as yours, MBP51.0074.B01.
Congratulations! -
My laptop presario cq42 too noisy sound come out like fan sound non stop
Can you help how to solve this problem. Normally my laptop is too noisy for fan sound
Please try getting the heatsink clean if the noise has started after using the product for sometime and possiblity of dust blockiing the vent area. here is the link.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01657439
also, consider updating the BIOS for your computer from http://www8.hp.com/in/en/support-drivers.html
hope it helps.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem*** -
Fdpstp failed due to ora-12899 value too large for column
Hi All,
User facing this problem while running the concurrent program.
the program is complted but with rhis error.
fdpstp failed due to ora-12899 value too large for column
Can any one tell me the excat solution for this?
RDBMS : 10.2.0.3.0
Oracle Applications : 11.5.10.2User facing this problem while running the concurrent program.
the program is complted but with rhis error.Is this a seeded or custom concurrent program?
fdpstp failed due to ora-12899 value too large for column
Can any one tell me the excat solution for this?Was this working before? If yes, any changes been done recently?
Can other users run the same concurrent program with no issues?
Please post the contents of the concurrent request log file here.
Please ask your developer to open the file using Reports Builder and compile the report and run it (if possible) with the same parameters.
OERR: ORA-12899 value too large for column %s (actual: %s, maximum: %s) [ID 287754.1]
Thanks,
Hussein -
Satellite R630-155 - Fan is too noisy and SSD upgrade
I am the owner of a Toshiba Satellite R630-155 (Core i5-480). My problems are:
1. The fan is too noisy and never stops. In normal operation (browsing and general office work) there is a constant high pitch noise that is audible three to four meters away in an office environment - in high load you just can't stand it!!! The fan never stops... even when you are doing nothing...
2. Heat is a big problem. The bottom of the laptop is constantly overheating and i have to place it on my desk in a way that the bottom left corner is outside of the table so it can breath fresh air from below - if not, the temperature rises and the (loud) fan is unable to keep up. When i work with the laptop while sitting on a sofa, i have to place a thick book between the laptop and my legs. The book must be thick (more than an inch) with hard covers, otherwise the heat passes through the book!!!!
3. Last (but not least, i just mention the biggest problems here) it's the problem with SSD installation. I bought a used Corsair F80 (80Gb SSD) from a friend, but i was unable to use it with the Toshiba - the BIOS was not detecting the disk. I tried installing all latest firmware updates for both laptop and SSD but i had no success. Then i gave the disk back and i bought a brand new Zalman 128Gb SSD (SSD0128N1 Sandforce) but i had exactly the same problem. I contacted my local Toshiba support and after a lot of conversation the only answer i got is that the laptop is not compatible with those SSD's and this is acceptable by Toshiba and not their problem. They told me that if i need an SSD upgrade i can only go for the Toshiba SSD that is installed on the portege series, which is sold by Toshiba for a ridiculously expensive price - about $500 for 128Gb. I contacted the European support center and i got the exact same reply. I searched on the Internet and i found someone else with the exact same problem with a Corsair 128Gb SSD - he found that the laptop detects the SSD after ten to twenty reboots. I tried that and it was true - after a lot of reboots the laptop detected the Zalman disk and i was able to install Windows 7 successfully, but the process is unacceptable. Also the disk is benchmarked by official sites at the speed of an OCZ Vertex 2 128Gb (and slightly better), but when i ran a benchmark in the Toshiba, the results I got were below half of the advertised speed. Same benchmark in another machine for the same disk, resulted in the advertised speeds.
Shame for Toshiba... nice design and portability but everything else is a big flaw. Their support in non existent and they do not value their customers. I feel they stole my money and I'll never buy a Toshiba laptop again.
Sorry for the big message, but I need I have to warn potential customers. Can someone help me with any of the above problems? Do you have the same problems too?
To be continued...Hi buddy,
Regarding the fan and heat issue: Did you make BIOS update? Friend of me has Satellite R630 too and he told me that fan activity with new BIOS version 2.10 is reduced. Furthermore the notebook is cooler than before so I would recommend installing this update. You can download the BIOS update here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
But before you start the BIOS update you should consider the following tips:
-Run update as Administrator only
-Unzip all files from zip archive before you start the update file
-Close all running programs and also the antivirus and firewall
-Make sure that battery is fully charged
Regarding the SSDs its always a little bit complicated installing 3rd party products and nobody can guarantee that such parts would work. You are always on safely side with original Toshiba spare parts.
Everything what you can do is installing the newest firmware for SSD and hope that it works but who knows maybe the BIOS update will also help you in this case ;) -
K7N2G-L working too noisy after bios update
After I download bios update of main board from MSI live update AMD processor start to work too noisy how can I fix it pls help!!!!!
Flash back to the BIOS that worked for you and report your findings to MSI technical. >>How to contact MSI.<<
Use the forum flasher in the future. Its safer. >>Use the MSI HQ Forum USB flasher<< -
Since having my MacBook Pro repaired (for a video problem) Time Capsule returns the following message: "This backup is too large for the backup disk. The backup requires 428.08 GB but only 192.14 GB are available."
I notice that there is also a new sparse bundle.
Since TC has my ONLY backup (going back about 4 years) I am reluctant to wipe it and start over fresh as I am afraid of losing files.
Is there a way of dealing with this?
I am using Snow Leopard 10.6.8The repair shop likely replaced a major circuit board on your MacBook Pro, so Time Machine thinks that you have a "new" computer and it wants to make a new complete backup of your Mac.
You are going to have to make a decision to either add another new Time Capsule....or USB drive to your existing Time Capsule....and in effect start over with a new backup of your Mac and then move forward again.
For "most" users, I think this is probably the best plan because you preserve all your old backups in case you need them at some point, and you start over again with a new Time Capsule so you have plenty of room for years of new backups.
Or, as you have mentioned, you have the option of erasing the Time Capsule drive and starting all over again. The upside is that you start over and have plenty of room for new backups. The downside is that you lose years of backups.
Another option....trying to manually delete old backups individually....is tricky business....and very time consuming. To get an idea of what is involved here, study this FAQ by Pondini, our resident Time Capsule and Time Machine expert on the Community Support area. In particular, study the pink box.
http://web.me.com/pondini/Time_Machine/12.html
Once you look through this, I think you may agree that this type of surgery is not for the faint of heart. I would suggest that you consider this only if one of the other options just cannot work for you. -
Unable to evaluate workflow rule - Value too long for field
Need help with a workflow error for a record update before the record is saved. There are 3 calculations that would be done in a particular order - all on number fields. Each time, I am overwriting existing values. The individual numbers could have up to 6 decimal spaces. When I try to update one or more fields that contain the calculation, I get an error message saying that the system is unable to evaluate the workflow rule - value too long for field (zNum6).
This same calculation is fine when a new record is entered and the calculation is done as a default field value.
Any ideas?I actually had to use a ToChar function at the beginning of the calculation and #### to indicate the number of digits to make this work. Oracle Help Desk provided the answer - quickly.
-
I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?
What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action. -
Cannot decrypt RSA encrypted text : due to : input too large for RSA cipher
Hi,
I am in a fix trying to decrypt this RSA encrypted String ... plzz help
I have the encrypted text as a String.
This is what I do to decrypt it using the Private key
- Determine the block size of the Cipher object
- Get the array of bytes from the String
- Find out how many block sized partitions I have in the array
- Encrypt the exact block sized partitions using update() method
- Ok, now its easy to find out how many bytes remain (using % operator)
- If the remaining bytes is 0 then simply call the 'doFinal()'
i.e. the one which returns an array of bytes and takes no args
- If the remaining bytes is not zero then call the
'doFinal(byte [] input, int offset, in inputLen)' method for the
bytes which actually remained
However, this doesnt work. This is making me go really crazy.
Can anyone point out whats wrong ? Plzz
Here is the (childish) code
Cipher rsaDecipher = null;
//The initialization stuff for rsaDecipher
//The rsaDecipher Cipher is using 256 bit keys
//I havent specified anything regarding padding
//And, I am using BouncyCastle
String encryptedString;
// read in the string from the network
// this string is encrypted using an RSA public key generated earlier
// I have to decrypt this string using the corresponding Private key
byte [] input = encryptedString.getBytes();
int blockSize = rsaDecipher.getBlockSize();
int outputSize = rsaDecipher.getOutputSize(blockSize);
byte [] output = new byte[outputSize];
int numBlockSizedPartitions = input.length / blockSize;
int numRemainingBytes = input.length % blockSize;
boolean hasRemainingBytes = false;
if (numRemainingBytes > 0)
hasRemainingBytes = true;
int offset = 0;
int inputLen = blockSize;
StringBuffer buf = new StringBuffer();
for (int i = 0; i < numBlockSizedPartitions; i++) {
output = rsaDecipher.update(input, offset, blockSize);
offset += blockSize;
buf.append(new String(output));
if (hasRemainingBytes) {
//This is excatly where I get the "input too large for RSA cipher"
//Which is suffixed with ArrayIndexOutofBounds
output = rsaDecipher.doFinal(input,offset,numRemainingBytes);
} else {
output = rsaDecipher.doFinal();
buf.append(new String(output));
//After having reached till here, will it be wrong if I assumed that I
//have the properly decrypted string ???Hi,
I am in a fix trying to decrypt this RSA encrypted
String ... plzz helpYou're already broken at this point.
Repeat after me: ciphertext CANNOT be safely represented as a String. Strings have internal structure - if you hand ciphertext to the new String(byte[]) constructor, it will eat your ciphertext and leave you with garbage. Said garbage will fail to decrypt in a variety of puzzling fashions.
If you want to transmit ciphertext as a String, you need to use something like Base64 to encode the raw bytes. Then, on the receiving side, you must Base64-DEcode back into bytes, and then decrypt the resulting byte[].
Second - using RSA as a general-purpose cipher is a bad idea. Don't do that. It's slow (on the order of 100x slower than the slowest symmetric cipher). It has a HUGE block size (governed by the keysize). And it's subject to attack if used as a stream-cipher (IIRC - I can no longer find the reference for that, so take it with a grain of salt...) Standard practice is to use RSA only to encrypt a generated key for some symmetric algorithm (like, say, AES), and use that key as a session-key.
At any rate - the code you posted is broken before you get to this line:byte [] input = encryptedString.getBytes();Go back to the encrypting and and make it stop treating your ciphertext as a String.
Grant
Maybe you are looking for
-
Exchange 2010 SP2 Server iPhone iOS 5.01 (4/4s) using ActiveSync Outlook 2007 clients When multi-day (not 'all day') meeting requests or appointments are being sent to email accounts which have an iPhone attached to the Exchange account via ActiveSyn
-
Could not load file or assembly
Hi Guys, I did content migration from wss 3.0 to 2010 share point i ran test-spcontent database and mount-spcontentdatabase. After fully migrated. once of the site i get following error below , can anyone please help me out. Error Error Could not l
-
Ipod is stuck on "please wait, low battery" screen
My iPod is low battery, and when I try to charge it it says "please wait, low battery" and has a spinning wheel, but after a few minutes that sign fades away and the screen is blank. I have tried using different USB cords, different chargers/computer
-
Can I get an extension to my Lightroom eval?
I downloaded and installed it but never got around to trying it. How can I extend my evaluation license?
-
Solaris 10 11/06 Rev. A hangs during installation
Just received my Solaris 10 DVD package in the mail; during the boot process to go into the installation process, it hangs no matter what you select in GRUB this is the screen (when selecting to boot 'Solaris') in which it hangs... SunOS Release 5.10