My HP 6700 won't print from my iPad

Printing works fine from desktop.  Printer is connected to correct network.  iPad says that it is sending and says that it's gone - no error message, but nothing prints?

From the "AirPrint Basics" article:
Additional Information
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.Notes:
Avoid connecting AirPrint-capable printers to the USB port of Apple AirPort Base Stations or Time Capsules. Doing so can enable traditional AirPort printing from a Mac, but it will not enable AirPrint functions for iOS devices. If you cannot use Wi-Fi networking to connect the AirPrint-capable printer, use an Ethernet connection from the AirPrint-capable printer to the Apple AirPort Base Station or Time Capsule.
Wi-Fi printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the printer is connected to the Wi-Fi network before attempting to print.

Similar Messages

  • My Envy 120 won't print from my ipad

    My Envy 120 was printing from my iPad 2 until it ran out of ink. I installed a new HP cartridge and it is copying ok. However when I try and print from the iPad- it is doing nothing. Initially it printed blank sheets but now nothing is happening. It also says on my iPad that the printer is low on ink which it is not. Thank you

    Wendy7
    Welcome to the HP Community Forum.
    Try restarting everything, including your home network Router.
    If that does not work, then you might try reinstalling the printer App on the iPad.  I realize that is extreme, but the app connection is whonked and the app is talking to the "old" setup.  It needs to know things are OK.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Printer won't print from a copy.

    Printer won't print from a copy or from computer. Goes through the motions but have blank page. HP Officejet 6600
    It was working fine and then had a message that the ink cartigages were bad, so I replaced them. Went to Set-up, tools, cleanprinthead when that finished I aligned printhead, but it didnt print the alignment page.  It is a HP Officejet 6600

    Hi @happyhunter11 
    Please make sure your firmware is up to date; Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
    If you have the latest update and the issue remains, call us. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Officejet Pro 8600 N911g won't print from applications from IMac OS 10.7.5

    Just had a software update today, now it won't print from applications (Excel, Word, etc).  I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc.  Don't know what else to do.  Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer.  IP addresses on wireless and printer are similar.  Looked all over forum, but couldn't find a solution.  Printer is not even 2 months old.  Doesn't make sense.  Seemed to stop  printing after we used the scanner, not sure if that is an issue for any reason.  Any help would be appreciated, thanks.

    Just had a software update today, now it won't print from applications (Excel, Word, etc).  I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc.  Don't know what else to do.  Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer.  IP addresses on wireless and printer are similar.  Looked all over forum, but couldn't find a solution.  Printer is not even 2 months old.  Doesn't make sense.  Seemed to stop  printing after we used the scanner, not sure if that is an issue for any reason.  Any help would be appreciated, thanks.

  • My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.

  • Won't print from rear tray

    I have a Pixma MG6220. No matter what I do it won't print from the rear tray from a source on the web. I go to both the quick setting and main tab and select "rear tray." Still prints from cassette. I took out the paper from the cassette. Won't print unti I load paper in the cassette. I even selected a different paper than plain paper and selected rear tray - but it still printed from the cassette.
    I selected "continuous autofeed" for a default, removed paper from the cassette - and it still wouldn't print from paper loaded in the rear tray.
    It will print from the rear tray if it's a document originating from my computer (or at least I just tried that and it worked). I did not change from plain paper, I only had to select rear tray.
    Yes, I realize "save the document to your computer" will be a suggestion, but the website won't let me. It's a "free printable" that is not downloadable.

    Hello.
    The issue may also be related to a setting in your web browser.  Check to see if your browser has a Page Setup option.  This menu may be controlling the paper feed setting.
    If the issue persists, please try using a different web browser to test the unit.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Won't print from computer

    my printer won't print from computer but will from an sd card

    Hi,
    Download and run HP Print and Scan Dr utility from link below to troubleshoot the issue.
    www.hp.com/go/tools
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • When i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    when i 'upgraded' to Mavericks, it locked me out and shut down my computer.  now it won't print from my Epson Stylus CX3810.  Epson doesn't have the driver to download and neither does the App store.  Suggestions?

    I'm having similar problems with my Epson Stylus DX5000.  There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site.  It shows as being available to print to, but just sends data to the print queue then job disappears.
    I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it.

  • My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

    I have a new HP Office Jet 6700 Premium
    It had been working just fine, wireless printing from my iPad.
    iPad shows a window that recognizes the printer, but it does not print.
    There is no error message.
    This question was solved.
    View Solution.

    The steps below typically resolve the issue you’re experiencing:
    1. Power off the printer.
    2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
    3. Power the printer back on.
    4. Power the iOS devices back on.
    5. Try to print again.
    Those steps usually resolve the issue. If they do not, try this additional steps:
    6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
    7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Just purchased HP 8610 printer, but it won't print from my 8.1 windows computer

    just purchased HP 8610 printer, installed it wirelessly to my network but it won't print from my 8.1 windows computer.  I can print from my cell phone and I can print using the eprint function, but even though I can see it on the network I can't get it to print a document.

    Hi,
    Have you ilstalled it software and drivers on your computer yet ? Please download and run the following tool:
        http://ftp.hp.com/pub/softlib/software12/COL50849/​mp-136589-1/HPPSdr.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP 4500 won't print from my Dell Inspirion Laptop

    My new HP 4500 wireless all in one printer won't print from my Dell Laptop running Vista Home Premium. It did for awhile but
    only if I left the printer on. The IP address kept changing for some reason. Now, it will not print from my Dell laptop at all. It will 
    print from desktop computer running XP but it is connected via a USB cable. This printer is definitely not "plug and play". Anyone 
    have any ideas how I can get it to work with my laptop?  I bought this wireless printer for that reason only.
    Best Regards,
    Mike

    It looks like the printer is not on your network properly.  The clue is that the printer's IP address is 169.254.x.y.
    You are running a ADSL connection, right?  Who is your ISP?
    Turn off the printer and your computers and finally turn off the Netgear router.  Unplug the telephone line (this is important) from the Netgear, wait 30 seconds and turn on the Netgear.  Wait another 60 seconds and turn on the printer.
    What is the IP address of the printer now?  If it starts with 169.254.x.y, then the printer is not properly on the network.  If you got a different IP address (one that starts with 192.168.x.z or starts with 10.x.y.z), turn on one of your Macs (but leave the telephone line disconnected).
    Open the printer's internal web page by browsing to its IP address.  Select Networking and then Wireless (802.11).  Under the IPv4 Configuration tab, select Manual IP:
    For Manual IP Address, use the existing printer IP address plus an offset.  For example, if the printer's IP address is currently 192.168.0.5, then use 192.168.0.30.
    For Manual Subnet Mask, use 255.255.255.0
    For Manual Default Gateway, leave blank.  This is important.
    Select Manual DNS Server:
    Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty.  This is important.
    Press Apply.
    Turn off the Netgear wireless-router and reconnect the telephone line.  Now turn off  the printer and all computers connected to your network.  Wait 60 seconds then turn on the wireless-router and then turn on the printer.  Then turn on the computers.
    Finish up by installing the SW on the Macs.  Since you're running Snow Leopard, simply go to the Print & Fax System Preference and press [+] to add the printer.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't.

    My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't. Please help!

    Hello,
    Is your printer connected to a wireless network with Internet access?
    Do other web services work on the printer? Meaning, can you use ePrint or the Printables on the front panel? (printables = apps on the printer like Disney, Menu Planner, Quick Forms, and so on.)
    Miles
    HP Employee

  • How do I print from my iPad air to the officejet 6700 premium

    Printing from my IPad air to the office jet 6700 premium

    Hi,
    The most straight forwad way to print from your ipad is to make sure that both devices and the printer are connected to the same wifi network. Once this is complete, you'll be able to print from within the apple software using the print option (this is done using apple's inbuilt airprint technology).
    Alternatively, with the same wifi connections, you could download the HP eprint app and print from within the app. Once everything is connected to the same network, you'll see your printer from within the app and be able to print to it.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HT4356 I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  IT IS NOT ON THE ABOVE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK.

    I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE.  PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS

    Some things you can try.
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • New oj5745 won't print from dell laptop using Windows 10

    New HP OJ5745 won't print from laptop using Windows 10.  Set up is wireless.  Norton firewall shutoff during set up.  Uninstalled all HP products and reinstalled new printer program.  Printer acknowledges connection to wireless network.  Printer shows up as default device on laptop.  When print command is sent, the printer indicates whirling circle but no results.  Bought printer yesterday.  Should I return it?

    Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet 5745 on your Windows 10 PC, and I am happy to help!  To verify the printer's hardware is functioning, are you able to make copies from the scanner glass? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series. Have you completed the hardware setup before trying to print from the computer? As shown in this guide, Set Up an HP ENVY 7640, Officejet 5740, or Officejet 8040 e-All-in-One Printer. If you are able to make copies, and completed the hardware setup, then try the steps within this guide, 'Offline' Printer Status Message Displays (Windows 10), and let me know what happens! Hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

Maybe you are looking for

  • IDoc not found in Objects list while Import from SAP

    Hi All,    We could not find the custom IDoc in the Objects list, to import to Integration Repository.    Please let me know is there any setup required on R/3 side. Thank you very much in advance. Rama

  • Ipod touch 4th gen with iOS 5 capacity bar says other section is taking up 1.53 GB?

    When I sync my ipod touch 4th gen with iOS 5 i have 2.8 GB of music and 1.27 GB of apps and i have a 8 GB ipod but the "other" section is taking up 1.53 GB?? i know thats not normal so how do i fix that?

  • B2B 11g - Managing File name from a JMS queue.

    Hi, I have configured a Listening Channel to use Generic File 1.0 (to poll a file from local dir) and send it to a Trading Partner. In B2B User Guide it has been said to have the file name as %TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%MESSAGE_ID%_

  • Reg:New GL

    Hi All, When I am trying add Assign Scenarios and Customer Fields to Ledgers for Non Ledging Ledger updating the Profit Center Scenrio is not showing, but it is showing for Leading Ledger what could be the reason for it showing for Leading Ledger it

  • How set  UserName and Password for HTTP Basic Authentication for a servlet

    Hi.. How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server? Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml). But i dont know how do it in JBOSS.. I am using Netbeans