My HP 7280 show a message : error: 0xc18a0206
I change a new original ink cartridges but can't print. what can I do???
Hi, have you tried resetting the printer?
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&cc=us&lc=en&dlc=en&product=3204785&tmp...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP
Similar Messages
-
I have tried many ways and many time to get past Error: 0xc18a0206 which is the Ink System Failure. I am not pleased to report that no solution works.
Apparently the individual ink cartridges are dated, and they have expiration dates, and if any of the cartridges you have in the machine are fully loaded with ink, and yet past their expriation dates, which means you didn't use them fast enough, the Ink System Failure Message "Error: 0xc18a0206" comes up and your machine will do absolutely nothing, no printing, no faxes, no copying.
This appears to be a case of fraud. HP pretends to sell you a printer, but what they are really selling you is a contingent license to print, and the contingency is that you buy a new "unexpired" set of ink cartridges from HP on a regular basis, I don't know if it's once a year or once every 6 months, but you need unexpired cartridges to be able to print, and brand new cartridges will expire on a date certain, not long from whe you buy them from HP. So they really are giving you a lease to print documents, not a piece of equipment that will print documents when you need them, or until the ink runs out.
The Photsmart 3210 All in One is a vehicle for the lease agreement or the license to print agreement, and it's all spelled out in their contract, in the very very very fine print designed to maximize their efforts to monetize their business efforts.
To me this looks like Tying, which means forcing you to buy one product so you can use another, and in this case it appears to be highly predatory tying because they don't just want you to buy one set of inks, they wat you to come back and buy sets of inks on a regular basis to keep your printer working. When the cartridges pass their expiration date, no matter how full they are, your machine stops working, and cannot be made to work without a new set of cartridges whcih are very very costly.
This looks like an anti-trust violation, which is a federal statutory offense, and like fraud which is a common law offense. I imagine there are rules governing consumer products that are also broken by the sharp practices of HP in selling their Photosmart and Inks and Very Fine Print Contract Deal.
As one single person, I am helpless to protect my interests invested in this very very costly and totally useless machine. But if there [edited comment by Moderator] who are not satisfied with their Photosmart 3210 All in One, [edited comment by moderator], or possibly in the form of a trade where HP takes back the offending machines, and provides simpler machines that operate without the ink cartridge expiration system that is so harmful to unsuspecting HP customers who simply are not aware of all of the provisions in the fine fine fine prnt of the sales contract at the time they buy, and have no reason to imagine that any company would ever try such an outrageous stunt. So they buy in good faith, and they get burned.[edited comment by moderator]. I can't. You can't. Together we might be able to.
How say you?Hello @Federallawyer ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
When I run the Ipod Updater I get the message Error in service
My 5g Ipod is not recognized and when I run the updater it shows the message Error in Service. Please help
Not sure....Have you tried resetting the iPod and trying it again. Almost sounds like the software issue, but not totally sure. If you haven't tried resetting your iPod, try that and see what you get! If you don't know how to reset your iPod just press and hold the middle button and the menu button. Your iPod will turn off, and reboot
-
I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/ -
what do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?
Hello brainiac08
Typically that error occurs because of a backup issue. Check out the article below to resolve it.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
TS3297 every time I try to download iTunes in my new computer it shows me an error message
Every time I try to download iTunes in my new computer it shows me an error message that says The installer has insuffucuent privileges to acces this directory C:/program files (x86)/iTunes. The installation cannot continue. log on as administrator or contact your system administrator.. retry or cancel and it doesn't le me go forward than this I have already contact HP and we fixed it I mean we installed iTunes 64 bit, but the minute I put my iPhone to sink it it says that I dont have the new version of iTunes whici I've just already installed..this problem has been like this for more that 3 months I need an assitance because my phone really needs to be sink because it is acting weard and slow... Other than that my husband and I are thinking seriously change our iPHONE 4S for samsung phones with less probles instead of buying the new iPhone 5 because of this dull reason...Thank you for your help!
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?
What type of Internet connection do you have? How fast is it?
-
my mobile it's locked and i can't restore it or re-download the software again and it showing a message unknown error what do i have to do ?
Try to connect in recovery mode, explained here:
iOS: Unable to update or restore -
I have a Lacie External hdd and on usb 3. Now If I plug in the device it shows a message to connect to windows or mac (Parallels installed) so If I click on mac it works fine well and good but when I select connect to windows it shows a error.
The error that pops up is:
The device "Lacie Rugged USB3-FW" was unable to connect to its ideal host controller.
Please anyone could suggest what the solution could be?
Thanks.But my 1 tb hdd is already formatted via ex fat which can work on both mac and Windows no limitation of file size also like if we use ntfs or fat it has a restriction of 4gb file size.
-
ýesterday my iphone 5c screen suddendly shows connect to itune and i try to restore it using itune but halfway i got a message error occured (14). please help me in solving this problem.
what did you learn when you search the internet for iPhone error 14?
-
Internet Explorer - "Show friendly HTTP error messages"
I have configured a servlet within web.xml to handle exceptions, and my servlet is indeed triggered when an exception occurs.
My users are all running Internet Explorer. By default the advanced setting "Show friendly HTTP error messages" is enabled, which causes them to see an ugly MSIE error page rather than my carefully crafted servlet.
They could see the awful exception pages Tomcat was handling out previously, which is why I set about making this change in the first place.
I believe that Tomcat was not adding an error code header to the exception page it was handing out on my behalf, but now that I've taken over exception handling the response contains a code 500 response. (My best guess, anyhow.)
I was going to simply strip this code out of the response, but upon inspection of the HttpServletResponse object, there is no method for doing such a thing.
Is anyone familiar with this issue? Can anyone recommend a solution?
Meanwhile, I'm off to continue scouring the forums before I start Googling again. =)
Thanks!!Well, those "friendly" errors have to be based on the response code for the page. So if you have your own error handling returning a page, then you could return a 200 response code with whatever error content you want.
For all practical purposes, the response code isn't very useful to users or browsers except for a few special ones maybe. But just because it's an error page to your web app doesn't mean it's an error for the browser. Those error codes are really meant for the HTTP protocol. -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
My iphone 4s cant activate after i update the ios to 6.0.1, always shows this message " Your request couldn't be processed" we are sorry but there was an error processing your request, Please try again later........please someone help me???
It sounds a lot like your phone was jailbroken or hacked to unlock it before you updated.
Was it? -
The Time Capsule is not providing a wireless connection.
When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.Which model TC is this? The A1xxx number from the base please.
Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
Do the factory reset.
Now check if TC comes up in airport utility..
If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
See below.
Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
i forgot the password of my iphone 3g and when i try to restore it it shows the message"my iphone 3g could not be restored an unknown error occurred(1015)" can any body help please..
This error normally appears if you attempted to downgrade or modify your iOS. See here http://support.apple.com/kb/TS3694#error1015
Maybe you are looking for
-
I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the t
-
Why I can´t make mirror with mini mac and apple tv using Mountain Lion?
Help me. Tranks
-
I have a 14" G4 1.07GHz iBook with a Non DVD Burning CD/CDR/CDRW/DVD drive. My question is, will it READ a dual layer DVD? Thanks!
-
First of all just want to say thanks for these forums and look forward to many posts. I recent purchased a Macbook A1181 white, I think its a 2006 version. Cor 2 duo 2 GB of ram. I bought this knowing there was issues with the top case and some keys
-
Good Afternoon Experts: I have been assigned a task to pop-up a L/U query on the BINS column of the matrix on the Inventory tab of the ItemMasterData screen. So, I need to use the Item value from the ItemNumber field at the top of the screen. <b>He