My HP B209a scanner stopped operating after I installed OS Mavericks. Anyone have any suggestions?

Can anyone give me suggestions to correct the problem? I uninstalled and reinstalled the printer. When I scan a photo, for instance, it seems to complete, but when I try to send it to iphoto files, or e-mail it, I get an error message. Then the whole thing stops and I have to force quit to get out of it.

This is so strange. The exact same thing happened to me yesterday. Suddenly, on my Mac and my PC, I was no longer able to SEND email. I am able to receive email...just not send. I too am a Comcast customer. I contacted Comcast and they, of course, said the problem had to do with the servers that my email client is trying to access and that it had nothing to do with them. We then set up my Comcast.net email account (which I never use) and it worked fine (sending and receiving).
So, I switched my other accounts to use Comcast's smtp server and that worked on the Mac only. I can now send email on my Mac but not on my PC.
This leads me to believe that it is not something wrong with my email client (since I have the problem on both my Mac and PC) but instead, something is up with Comcast.
I checked and it turns out that Comcast just implemented a new Acceptable Use Policy which specifically implements a NEW traffic management policy. This was JUST implemented this month. So, I am getting the sneaking suspicion that Comcast is somehow denying me access to those SMTP servers and I have to use their SMTP server instead.
Does this make any sense to anyone???? I am at a total loss here.
Thanks,
Susan

Similar Messages

HT1665 my iphone headphones remote has stopped working after a few uses. does anyone have any suggestions on how to fix it please??....

Hi all.
My headphones are new form apple as they came with the phone. They have been good for the few times i have used them but out of the blue after about a weeks use they have stopped allowing me to skip forwrd or backwards???????? I am still able to pause and use my mic for Siri so im a little bit confused as to what the problem can be.. Is there anyone out there who knows what the problem might be or how to fix it??
Thanks.

Go to the settings in your Jeep, "forget" the iPhone. And on the iPhone "forget" the jeep. Then put the Jeep in Pairing Mode and tap Settings/BlueTooth on the phone and pair them anew (which sounds less confusing than "repair them").

Huge problems with network accounts. They keep disapear all the time, after restart they are back. But only for 1h or less. Anyone have any suggestions?

I`m using Open Directory, its been working fine for 2 months. But now all of a sudden this very annoying error keeps repeating itself.
It started happen about a week ago,and after a reboot of the server it was working fine, until now. Now the accounts is gone after 1h or so uptime, and after restart all accounts is there, but soon to be disapeared again. Anyone have any suggestion what to look for? And why did it happen in the first place?
For now theres only one user at the office so he uses my admin account (Local user on the server) to connect to shares etc. But in less then a week there will be much more people at the office, so i will need to sort this out ASAP. Appriciate any suggestions/help. thanks in advance.

Open Directory; Password Service Server Log:
(A little shortend, nothing seems wrong there?)
Jul 30 2013 09:51:18 456163us    Mac OS X Password Service version 387.2 (pid = 139) was started at: Tue Jul 30 09:51:18 2013
Jul 30 2013 09:51:18 873014us    RunAppThread Created
Jul 30 2013 09:51:18 873099us    RunAppThread Started
Jul 30 2013 09:51:18 873122us    Initializing Server Globals ...
Jul 30 2013 09:51:19 820305us    Initializing Networking ...
Jul 30 2013 09:51:19 820361us    Initializing TCP ...
Jul 30 2013 09:51:39 735055us    SASL is using realm "server.xxxx.no"
Jul 30 2013 09:51:39 735100us    Starting Central Thread ...
Jul 30 2013 09:51:39 735109us    Starting other server processes ...
Jul 30 2013 09:51:39 735117us    StartCentralThreads: 1 threads to stop
Jul 30 2013 09:51:39 735152us    Initializing TCP ...
Jul 30 2013 09:51:39 735186us    Starting TCP/IP Listener on ethernet interface, port 106
Jul 30 2013 09:51:39 735242us    Starting TCP/IP Listener on ethernet interface, port 3659
Jul 30 2013 09:51:39 735265us    Starting TCP/IP Listener on interface lo0, port 106
Jul 30 2013 09:51:39 735290us    Starting TCP/IP Listener on interface lo0, port 3659
Jul 30 2013 09:51:39 735318us    StartCentralThreads: Created 4 TCP/IP Connection Listeners
Jul 30 2013 09:51:39 735329us    Starting UNIX domain socket listener /var/run/passwordserver
Jul 30 2013 09:51:39 736296us    Finished starting other server processes ...
Jul 30 2013 09:51:39 736313us    -- Password Server successfully started --
Jul 30 2013 09:51:39 736321us    -- Start time: 21 sec, 287 msec --
Jul 30 2013 09:52:19 502436us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
Jul 30 2013 09:52:19 516404us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
Jul 30 2013 09:52:19 865774us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 870922us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 879988us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 892772us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxo.no$}.
Jul 30 2013 09:52:22 897368us    GETPOLICY: user {0xfc35f9dcb0b711e28baca820661e5a32, geir}.
Jul 30 2013 09:52:22 904252us    GETPOLICY: user {0x9ae96942a73011e2aac5a8206623cd3d, christoffer}.
Jul 30 2013 09:52:22 916530us    GETPOLICY: user {0x523107c8ae7911e28baca820661e5a32, anst}.
Jul 30 2013 09:52:22 964934us    GETPOLICY: user {0x5841b68eb09611e28baca820661e5a32, fres}.
Jul 30 2013 09:52:23 12619us    GETPOLICY: user {0x148c7f5c916811e28cd3a8206623cd3d, admin}.

Tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

tried installing Icloud calendar on windows 8.1 and get the message "Calendar has stopped responding". does anyone have any suggestions?

Hey there Alex,
Welcome to Apple Support Communities.
It sounds like you’re running into an issue installing iCloud Control Panel on your PC, you’re seeing an alert message related to an iCloud server not responding. Take a look at the article linked below and try running through the troubleshooting steps it provides.
iCloud: iCloud Control Panel setup cannot be started - Apple Support
So long,
-Jason

Today, after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized. Anyone have any suggestions.

Today, after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized. Anyone have any suggestions.

You need to give some more info.
How are you publishing your site - iWeb FTP or another application? If the latter, is the encoding set to Unicode (UTF-8)?
Who is giving you this message - the server?

My iPhone 4S has decide to stop playing any of my music. All my songs are there, but when I click to play, it just scrolls through a bunch of songs and then reverts back to the play list. Anyone have any suggestions as to how to correct this? Thanks.

My iPhone 4S has decide to stop playing any of my music. All my songs are there, but when I click to play, it just scrolls through a bunch of songs and then reverts back to the play list. Anyone have any suggestions as to how to correct this? Thanks.

I am having the same issue. And today, I noticed that when I was talking on the phone, the volume went down low. I had to reboot the phone, so that the volume was up again. Mostly, though, it's my music that I am having issues with.
Same issue as listed above. iPhone 4S. IOS6.

So, my ipod touch 4th generation has stopped working. every time i plug it into a wall or an outlet, it will regester that it has been plugged in, but it will not charge, and trurn on. does anyone have any suggestions? thank you.

my ipod touch has stopped working. I will plug it into a wall, or computer, and it will register that it is plugged in, but it will not charge and turn on. does anyone have any advice? thank you.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

After updating to IOS7 I have lost a years worth of pictures and my wi-fi keeps dropping out. Anyone have any suggestions?

After updating to IOS7 I have lost a years worth of pictures and my wi-fi keeps dropping out. Anyone have any similar problems or suggestions?

Re wifi:
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Re Photos:
Get them from your backup. You do backup frequently don't you?
iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
iPad Data Recovery Software (PC & Mac)
http://www.anysoftwaretools.com/ipad-data-recovery.html
 Cheers, Tom

My question has to do with analog input and triggering? Does anyone have any suggestions on how i can improve the attached vi so it can trigger on a 50kHz ten cycles pulse after the pulse has been sent out on the output?

Could you just look at this vi and tell me if i am doing anything wrong? I get errors that are different each time I change something. here are the inputs I am using
Output Side:
amplitude = 1
freuency = 50kHz
Sampling Frequency = 1MHz
3 of Samples = 200
Input Side:
Input Buffer 4000
trigger type = analog
pretrigger = 5
edge or slope = rising
scan rate = 500kHz
# of scans = 2000
Conditional Retrieval
mode = on
slope = rising
skip count = 0
level = .1
offset = 0
hysteresis = 0
So what we want to do is capture the ten
cycles of the 50k output pulse on the input and need to store that so we can plot it later, do you have any suggestions. we are using the PCI-MIO- 16E board.
Thanks,
Jarrod
Attachments:
InputOutput2.vi ‏88 KB

1) Toss the sequence frames (no flames please).
2) Set you read and have it ready to trigger before oing the output.
3) After the output, go back and read the data that is waiting for you.
4) If you have errors tell us what they are and under what conditions they occured.
End of Ben's suggestions for now.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I have a HP infared capshare 920 scanner I am having trouble getting my iMac to recognizing it. I purchased a irda specifically for the imac and it will not recognize scanner. Does anyone have any suggestions on solving this problem?

I am using a HP CapShare 920 handheld scanner and I would like to download documents onto my mac. I purchased an IR778 usb port adapter specific for a mac, downloaded the required app for this. The mac recognises the ir778 but will not recognise the scanner. Now it works fine on my netbook, yet I can not read the files they are so small. I am looking for some help so I can use my much preferred mac.

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Anyone have any suggestions to stop button at bottom freezing?

does anyone know how to stop the button at the bottom of the screen from freezing, which means that i cannot move between applications?

Is orientation lock on?
iPhone User Guide (For iOS 6 Software)

HT1386 After updating my Iphone 4s with the new software, my phone will not show up in Itunes. I have tried several things but nothing works. Does anyone have any suggestions?

Help! I have recently updated the software on my Iphone 4s and now my Iphone will not show up in Itunes. Can anyone please help! I am very frustrated, I have tried several things but I cannot get it to show up

Double check the version of iTunes on your computer. You must have iTunes 11.1 or later.

HT1430 my phone had full battery ive had no problems with it. after a phone call it turned off and now wont turn back on does anyone have any suggestions?

please can someone help me figure out why it has just died on me

Connect iPhone to Wall Charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

I keep getting prompted to enter my Apple ID and password numerous times daily on both my iPad and iPhone. This started happening after I installed the latest update. Any suggestions?

Ever since installing the latest update to iOS 7.1.2 I am prompted numerous times daily to enter my Apple ID and password. I am having the same issue on my iPad 2 and my iPhone4. Any suggestions?

First, if you still have access to the hacked account, rename it if you can and change the password for it.
How to change the name you use for your Apple ID
If needed, change the email linked to it as well. Get control of that account back.
As all iTunes purchases are linked to the account that purchased them (music, apps, etc) it is best to rename an account rather than creat a new account. Apple ID's can't be deleted or merged either.
From Frequently asked questions about Apple ID
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you need further Apple ID help, you will want to contact Apple, Apple ID Support
or maybe iTunes Support
ivan

My Macbook Pro won't shut down after installing Lion. Anyone have a suggestion to fix this?

Just installed Lion, and it won't shutdown!
The only way it'll shut down is if it drains the battery.
Help!
J

Lots of other people are complaining about their Macs taking long times to shutdown. Some solved it by reinstalling Lion from scratch (without using a Time Machine backup and simply copying all their files on to the new install).
Others discovered old software that is no longer compatible with Lion (I found Mac The Ripper in mine, plus many others on day 1). I uninstalled some apps using App Cleaner (google it, it's free and it's awesome).
I was having a hard time shutting down my macbook pro, now it's back to normal.
Try finding applications that are not compatible with Lion. Their icons should be greyed out and with a diagonal line crossing it. Make sure you erase these applications and library related files, which is very simple if you use App Cleaner. And make sure you look into sub-folders inside the Applications folder, as I missed a couple because they were not immediately visible.
Hope it helps. If it does, let us know.

My HP B209a scanner stopped operating after I installed OS Mavericks. Anyone have any suggestions?

Similar Messages

Maybe you are looking for