My HP C4600 is not working since updating to 10.10.2

My HP C4600 all in one printer is not correctly aligning, nor can I fix the issue by realigning, since updating to 10.10.2

in addition, my internet now seems to be intolarably slow! Frankly, the new operating system 10 has been a total nightmare from the get go. I keep updating in hopes of getting back to Mac as I knew it, and it just causes more and more issues!!!!!!!

Similar Messages

  • Hdmi does not work since updating to jelly bean

    Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

    I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

  • Tv adapter not working since updating ios

    since  updating my iPad 2  to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

    Hello jimtallis,
    The steps detailed below may help get your TV adapter to function correctly.
    Check the compatibility
    Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
    If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
    See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
    Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Cheers,
    Allen

  • Photoshop not working since updated Aperture software

    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    I am trying to do some selective colouring but the brush tool is not working.
    Thank you!

    Fern1 wrote:
    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    If it is the Photoshop program not working, then resetting the preferences would be the first thing to try if you have already checked any tool options and layer settings that may be creating a problem.
    Pressing the 'Option + Command + Shift' keys immediately after launching Photoshop will invoke the reset dialog before Photoshop loads it's UI. Use the options to reset as needed. Here is a link to the help file for more info:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab 64-74aaa.html
    I am trying to do some selective colouring but the brush tool is not working.
    Are you referring to Photoshop here or Aperture (both have brush capabilities)?
    Note - there is currently a known issue with Aperture 3.2.3 that can cause issues with external editors and plug-ins:
    http://support.apple.com/kb/TS4237
    Hope that helps.

  • Wi-Fi Not working since update 2.3.5

    Since updating Android OS to version 2.3.5 I have not had any function in my wi-fi radio. System attempts to scan and never recognizes ANY wifi networks.
    Tried entering/ managing setup manually, but network is listed "Out of Range" even when network is confirmed up by many other devices.
    Any ideas, patches or advice?
    *Wifi worked fine before update

    The obvious painful advice is: Try a hard-reset. If that doesn't do it, it might be time to call VZW support and get a replacement.
    When you installed the update did it appear to install correctly, no error messages or anything?

  • ITunes not working since update, says I don't have insufficient privileges to access directory

    Ever since the iTunes update it has not worked at all for me. So I uninstalled and tried to reinstall but it will not let me. I always get this pop up "The installer has insufficient privileges to access this directory: C:\Program Files\iTunes. The installation cannot continue. Log on as administrator or contact your system administrator".    I am logged on as the administrator and I have turned off my antivirus. Somebody please help!

    tunes. 9..1.1 insufficient privileges error for corefp -- itunes

  • Alt+Scroll do not work since updated to firefox 17.0

    Usually I use Alt+mouse scroll to scroll one line in firefox, but since updated to firefox 17.0, it do not work anymore, even in safety mode.

    It's ok now, thank you very much!

  • Exchange email not working since update

    Help! Before the update, my POP accounts weren't working (wasn't receiving new email unless I turn phone off and back on). Now POP seems to be working, but my corporate Exchange account is totally not working. There is a (new) yellow banner message that appears in email list saying Connecting to Server. And then it seems to get stuck there. It somehow downloaded 1 message (the first one that came in) since the update of my phone this morning. But since, it won't Push any more email.
    Also, I think my GPS got worse. When I was outside earlier (granted, I was around tall buildings) it wouldn't get a lock--not even after 5 minutes. WIll have to test further.

    Thanks for the tip.
    I was having the same problem, although it was kinda nice in a way not to be getting instant email notification.
    But I'm back to normal.
    Uninstalled and installed and my nose is back on the grindstone.

  • App update not working since updating software

    My app update is not working ever since I uploaded the new software last week.  Any suggestions?

    You may want to Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Phonebook/contacts not working since update

    My phonebook/contacts has stopped working, so I can't call or find numbers. All this since the update, everything else seems fine at the moment.

    Hi,
    I'm a bit confused, how do you mean that it does not work? What happens when you enter the phonebook, do you receive any error message?
    Where is the contacts stored? Do you sync via Gmail or an Exchange account or is it local contacts? After the repair, did you restore any backup were your contacts was stored?
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Camera not working since update 8/3/12

    After an auto downloaded update yesterday, my camera
    does icon button does not work from the touch screen anymore
    Any ideas?

    Hi Mr trrlightning, I did reboot yesterday after the update & it was ok then when I used it, but today it would not work from the touch screen icon. However I did do as you sugested & hey prestow! I now have my camera back.
    Many thanks.

  • AirDrop not working since update

    I Have an iMac, iPad mini, iPad and iPhone 5s. We updated to to the new operating systems 2 weeks ago On all devices. Now airdrop does not work on any device. AirDrop to everyone is enabled, turned on under sittings. I turned it off, restarted, turned it back on and nothing helps. How can I fix this issue. When you click airdrop it opens but never shows another device to drop it to. Please help. Thanks.

    if you are one of those people whos router is as it came then likely it have a name (ssid) like Netgear or linksys or the likes
    if you live close to thers who have the same router this could mean your appletv is connecting to an unprotected wifi network with the same ssid as your  without you realising it
    otherwise I would connect it by usb cable to the computer and use itunes to restore the firmware of the appletv

  • Backspace Key not working since update to 10.5.8

    Hi,
    I recently updated to 10.5.8 (or which ever update it was where the iDisk icon turned blue) and now my backspace key doesn't seem to be working. I am using a white Apple USB keyboard. The backspace key now functions like the forward delete key and if I want to backspace I have to press Shift + Backspace. This is very frustrating and not something I have had to do before or need to do on my Powerbook.
    At first I thought the keyboard was broken, but I am running a Power Mac G4 on a switch cable with the same keyboard and monitor. I have updated the Power Mac to 10.5.8 and the backspace key works fine.
    If anyone has any ideas please let me know.
    Yours
    Dominic

    Welcome to Apple Support Communities
    I think you wanted to say Mail 4.6, or is Mail 3.6 right? There's a bug in OS X 10.6.8 that may make Mail stop working after updating to 10.6.8. Apple has got the steps to fix that > http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US

  • Multi-Room DVR not working since update other day

    I am unable to watch recorded programs in remote locations.  Playback only works in the room with the DVR.  I am able to access DVR menu and programs, when I attemp playback, program immediately freezes and stops playing.  Eveverything was fine until after the update the other night.  I assumed that any programs recorded after the update would work without issue, but they are not either.  I've tried unplugging units, using the "quick fix" feature on Verizon's site and through the set-top box, to no avail.  Any suggestions?

    McNyk wrote:
    I am unable to watch recorded programs in remote locations.  Playback only works in the room with the DVR.  I am able to access DVR menu and programs, when I attemp playback, program immediately freezes and stops playing.  Eveverything was fine until after the update the other night.  I assumed that any programs recorded after the update would work without issue, but they are not either.  I've tried unplugging units, using the "quick fix" feature on Verizon's site and through the set-top box, to no avail.  Any suggestions?
    Been having same exact problem since last weeks software update. Must resolve soon...  #frustrating
    (Thankfully my TiVo is my primary dvr)

  • Adobe Flash Player not working since update

    Good Morning, I had a update yesterday and since then anything that uses Flash Player doesn't work, it stops sends a report to apple and thats it i've tried uninstalling the flash player and still nothing, I tried repairing the permissions in disk utility. Really no clue what to try next.

    I now have a solution to this problem, which has certainly worked for me.
    Backup system. Go to User/Home/Library/Preferences. Move all files in the Preferences folder to a new temporary folder on the desktop. Log out and log in again. Test. Embedded video should work.If it does, copy the old preference files back to the original Library/Preferences folder but select DO NOT REPLACE. Log out and back in again.
    To retrieve e-mail accounts, mail, and account settings, copy the COM.APPLE.MAIL.PLIST file from the temporary desktop folder into the Library/Preferences folder and select REPLACE. When you're happy that all your data is in place and everything works, delete the temporary desktop folder.

Maybe you are looking for