My HP Color LaserJet 2605dn has become slow - Used to be fast

I know a lot of people have complained about slow printing with the 2605dn.
My problem is that mine used to be fast. It would print a web page or Word document within one-two seconds of the print command.
Now, it can take a minute or even more for the same print job to start.
The printer is connected to a home network via Ethernet, with a fixed ip address, and the Macs are wirelessly connected to the network via Airport Extreme. My old PowerMac G5 has been replaced with an 8-core 3GHz MacPro with 8GB of RAM, so I doubt that the CPU is a problem.
Are there printer caches which can get filled up? This acquired slowness is very annoying.

I had this exact problem. I've had the printer for about a month and it was very fast at first. I really like the printer, especially the duplex ability. Over the past week or so it became excruciatingly slow. I just finished downloading the new firmware and drivers but before installing them something made me check the Ethernet cable which is plugged into my Airport Extreme 802.11n Gigabit router. It was loose and partially pulled out so I plugged it back in all the way and the printer went back to printing the way it is supposed to.
You might want to give this a try. Perhaps try another Ethernet cable or direct connection via USB if that doesn't work.
Frank

Similar Messages

  • Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!

    Sean L. wrote:
    I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it.  When I try add the printer I get this message:
    Software for this printer is available from Apple. Would you like to download and install it?
    After clicking Download & Install (the only option other than Cancel), I get this:
    Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
    What's the workaround when Mountain Lion can't find the driver?
    Thanks!
    The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
    Printer on, and if networked, use a static IP address
    Print & Scan
    IP
    Provide printer static IP address
    Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
    Add
    Configure Driver under Options and Supplies
    I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
    Hopefully, you have already sorted this out.

  • HP Color LaserJet 2605dn going offline for no apparent reason. Need help!

    There are four of us with these printers in our finance department.  Two PC's are running Windows Vista and two Windows 7.  The printers are networked but installed locally on each PC.  Routinely all of these printers will go offline at the same time and there seems to be nothing that helps.  Our IT's answer is to buy four new printers but these printers work great when they're working.  There has to be a solution to this mystery out there somewhere.  I would appreciate any suggestions.

    Hi JThorne,
    The HP Color LaserJet 2605dn is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • HP Color LaserJet 2605dn prefers Macs over PCs!

    I have an HP Color LaserJet 2605dn on my home network, with two Macs (G5, MacBook) and two PCs running Windows XP Pro. I used Bonjour to set up the LaserJet on the Windows machines. The printer has been working well for the past 4 months until just this past week, when the Windows machines just stopped printing. In the system tray a printer icon appears with a red question mark and a bubble that says "This document failed to print" along with a few more details.
    I've tried the usual (power off and on printer, power cycle DSL modem/router, uninstalling the printers and reinstalling) without success. I've searched the Microsoft and HP forums. In short, I've spent a few hours troubleshooting. The funny thing is that the Macs print fine. My kludge/fix is to set up the G5 to "share" the LaserJet and when I create a new printer on the Windows machines using that ("LaserJet 2605 @ G5") it works.
    Just wondering if anyone else has come across this weirdness.

    I am so glad it helped. I found it while trying to figure out why my Vista box will only print 2/3 of a page then it locks up hopelessly. I managed to finally get my XP box to print today with help from the forums too! If you come across anything about my Vista problem please look for that item and post. I'd really appreciate it!
    ---CJ

  • Color Laserjet 2605dn printer with printing envelopes correctly

    I am having problems with my HP Color Laserjet computer which is not printing envelopes from the computer which has Windows 8.1 installed on it. It will print out letters just fine now, but had problems with that previously, using WordPerfect Suite. The printer is a Color Laserjet 2605dn, which is connected to my home network. The same problem seem to be happening on my mini laptop which is running Windows XP.  I just fixed the printing problem on my windows 7 computer and had to print my envelopes using it. The HP Mini Laptop use to print out my envelopes just fine previously, but have the same problem. On the Pavillion Sleekbook, which is the newest I have the special print software from HP which lets me print paperwork where the others are not using it. I would appreciate any help with this problem. The setup isn't correct and the envelopes don't print out correctly like they did previously.

    Hi semco72057,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
    I hope this helps.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Color LaserJet 2605dn Printing only Black and white

    I have a Color Laserjet 2605dn and all of the color ink cartridges have run dry. However the Black cartridge has over 2,000 pages of ink in it and the printer will not let me prink only Black and White. It seems the color cartridges must also have ink in them in order for the printer to print. Does anyone know a work around so that I can print with the Black Cartridge and not purchase the color cartridges?
    This question was solved.
    View Solution.

    Hello,
    Thanks for the post.  I've attached a link below that may assist.  Good Luck!
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Color LaserJet 2605dn reboots when attempting any report from LCD. Says Printing, then resets.

    HP Color LaserJet 2605dn reboots itself when attempting any report from LCD.  Says Printing, then resets with the green and amber light lit and the LCD screen says Hewlett-Packard.  If I try to send a print job to it from a computer, it says printing, and resets just the same. I've upgraded the firmware to 20071108.  I've rebooted the printer holding down the green and red buttons that didn't help.  I also held down the two gray buttons and powered on which didn't help, it just cleared all my printing stats and cleared my configuration.  I've attempted print jobs via USB, and network with same results.  Admin webpage comes up.  Thanks.

    Hi Pahu,
    Thanks for you reply. Here's some additional information because I'm not quite sure how to resolve the network addressing as you described. The router is set up as a DHCP server, using the standard 192.168.1.1 IP address, and the subnet mask is 255.255.255.0 The starting IP address is 192.168.1.100, and I have it set to allow up to 50 connections. (No particular reason, I think that may have been the default.) The printer is set up to check a variety of connection protocols, starting with DHCP. If that fails, it moves to BOOTP, etc. When I print the network configuraton page from the printer, it tells me the IP address is 169.254.18.32, subnet mask 255.255.0.0, default gateway 169.254.18.32, and the IP is configured by AUTOIP.
    In the past, when it has been working properly, the printer shows an IP address of 192.168.1.10X, usually .100 or .101, but it depends on which device I've powered up first. This is what I would expect, given that the printer should be communicating with the router and be assigned an IP address by DHCP. What I can't figure out is why the printer reverts to its internal default IP address 169.254.18.32, and why this is inaccessible even if I try to designate the printer as an IP printer and type in the printer's IP address.
    Do I need to set the printer to refresh its DHCP lease more often to ensure it doesn't get cut off by the router? How do I make sure the printer stays on the same subnet as the computers if they're all on the same router? Should I assign the printer a static IP address like 192.168.1.100, then set the DHCP range to start at 192.168.1.101? Sorry to ask so many questions, I'm not a network expert and I didn't think this printer would be such a pain to configure.
    Cheers,
    R

  • Unable to print with HP Color LaserJet 2605dn since Upgrading to Mavericks

    Since upgrading to Mavericks, I've had nothing but problems printing to my HP Color Laserjet 2605dn.
    I'm having this problem on both my iMac and my MacBook Pro.
    I get errors like:
    "unable to write pirnt data broken pipe"
    "unable to send data to printer"
    "printer not connected"
    I've been reading responses to others with similiar issues and I've tried
    deleting and re-adding my printer.
    reseting my printing system
    Installing Guenprint.
    re-adding my pirnter with a generic PCL driver.
    None seem to correct the problem.
    This problem happens both when connected directoy with USB and when connected through the network.
    I have no problem printing with my work (Wondows) laptop.
    Any help would be appreciated.

    Thanks, a brody.
    Yesterday (before I read your response), I downloaded the latest firmware (20140413.) (What do they say about great minds?)
    I thought the issue may have been resolved.
    I was finally able to print my bank statement on both the iMac and MacBook.
    Today, I'm back to the the same issues.
    Very frustrating, even though I've had the printer for five years, I've printed less than 20,000 pages.
    In my mind, it's pointing more and more towards a hardware issue.

  • Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

    I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server.  I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers.  Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer.  I have even tried the generic 32 bit PS and it says the same thing.  Any ideas on what I am doing incorrectly or where to get the drivers that I need?
    Thanks,
    Gary

    Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

  • HP Color Laserjet 2605dn - won't print in color

    I have an HP Color Laserjet 2605dn printer and recently purchased a new computer with Windows 7.  Our IT dept. installed an updated driver (HP Universal Printing PCCCCL 6) but now my printer will not print in color nor can I find a setting where I can adjust it.
    I also cannot duplex but found helpful post that I will use to try and correct that issue.  If you can help me I would appreciate it.  IT seems to busy to help and my work involves a fair amount of graphics so I need my color.
    Thank you!!!

    This post may be old but someone might use it later.  Right click on the printer and go to properties.  On the General tab go to printing preferences.  (Windows 7- double click printer, click Adjust print options.)  Advanced tab - expand Graphic, under Image Color Management change: ICM method to ICM handled by printer or host system.  Apply and close out the windows.  Run a test print to make sure it works. 

  • HP Color Laserjet 2605dn won't print the red color

    My HP Color Laserjet 2605dn won't print the red color.  It's comes out very light, barely a pink color.  It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.

    Hello dp146,
    I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
    This will be the right section to troubleshoot this issue.
    Good luck.
    I worked on behalf of HP.

  • I am facing what appears to be a malware, my browsing is slow, my browser hangs and also my system has become slow

    I am facing what appears to be a malware, my browsing is slow, my browser hangs and also my system has become slow, these are symptoms, I cant watch videos on youtube

    You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Application Support/VSearch
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchAgents/com.vsearch.agent.plist
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    After moving all the files, restart the computer and empty the Trash.
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    This unwanted program is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Please help! New PC with Windows 7, now won't give option for duplex Color Laserjet 2605dn

    Hi everyone,  I'm hoping someone can help.  I have an HP Color Laserjet 2605dn, and after 4 years with a Dell laptop (and Windows XP) I had to get a new computer, this one with Windows 7.  When I plugged in the printer for the first time, it loaded drivers and seemed to work great - EXCEPT there is NO option for duplex printing in the effects or finishing areas.  So I went to the HP website and downloaded the Universal Print Driver, which DOES have duplex, but it won't print to the 2605dn printer!!!
    I am ready to throw this out the window.  I don't recommend buying anything new while you have PMS...hahahaha.  Seriously, if someone could help, my stress level would drop dramatically.  I print a lot, and not doing it duplex would waste so much paper!
    Thanks in advance.

    Enable the duplexer as described in the Vista / Windows 7 Duplex Troubleshooting Guide as follows:  go to Start, Devices and Printers, right click on the printer, Printer properties, Device settings, Installable Options, set the "Duplex unit for 2-sided printing" to installed, OK.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My Macbook pro 10.6.8 has become slow in recent days

    My Macbook pro has become slow in recent days. I have installed Macafee internet security software and not sure whether this is slowing down my system. Especially Safari has become really slow. The videos stuck, when another webpage gets loaded in another tab. The rainbow circle keeps appearing oftern in safari. The pages are very slow in response, even scrolling takes a good minute or two. The applications are taking more time to load. I admired my mac for its quick response, but snow leopard has turned into a snow turtle.

    I also finger McAffee as the culprit, it's not necessary on Mac's as of 10.6.8+ Apple installed their own anti-OS X malware detector and it checks for updates like every 26 hours or so.
    If you need to clean the Windows malware off their files, the free ClamXav does the job nicely and doesn't bugger up the machine as it's run as you need it.
    For your other slowdown issues, I suggest you look through these tips of mine, my Snow Leopard is incredibly fast.
    Why is my computer slow?
    Diagnosing network issues
    Tune up your Mac here
    For Snow Leopard Speed Freaks
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over

    When I use my Color LaserJet 2605dn for wireless printing, it keeps printing the first page over & over again.  I have to cancel print job on the printer in order to stop it.   It works properly on the computer that is directly wired to it, but won't on any other computer that I try to print from.   I have had this problem for some time, but now have certain thing that I must print from this printer & can't do it wirelessly.  It doesn't seem to be my network, because I can print from all of the other computers onto other wireless printers I have in the office.
    Any advice would be appreciated!

    Hello,
    Thanks for the post.  I've attached a link below that may assist.  Good Luck!
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Maybe you are looking for