My hp deskjet 2050 hasa a problem output tray closed

my hp deskjet 2050 has a problem output tray closed modl no J510a i try everthing

Hi there,
Try downloading and running the Hardware diagnostic utility located here. It can resolve a lot on its own. If not it will give us a better idea of what is going on. Let us know the results.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Output tray closed error message

I keep getting the error message that my output try is closed when it is open. I saw another post about this that said maybe the little sensor arm is broken and that does not appear to be the case with mine. What else can I check??? Cathy

Hello , Thanks for posting in the HP Forums. I'd like to help you with the "Output Tray Closed" message you are getting in regards to your HP Deskjet 1510 Printer. Firstly, Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protectorIf that doesn't immediately resolve the issue, I would recommend removing and re-installing the ink cartridges, to see if that will clear the error state. If the issue remains unresolved, I'd recommend contacting our HP phone support for further assistance.Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your
contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone
number Hope this helps!

Hp 61 xl incompatibility with deskjet 2050

Hey,
I juts bought a 61 xl ink cartridge for a deskjet 2050 but seems to be incompatible, any suggestions?
Is it necesary to update the software?
Thanks

What country are you in? The Deskjet 2050 has regionalized cartridges, if you are outside the US you may need a different cartridge number.
According to the links from the site here the 61 XL cartridges should work in your printer.
What exactly is the error message? The document here may help address the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Why has my hp deskjet 2050 printer and scanner suddenly slowed down and printing one line at a time

why has my hp deskjet 2050 printer and scanner suddenly slowed down and printing one line at a time

This is usually indicative of a defective print cartridge. Suspect the black is low in ink or defective. Please check all cartridges.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

The Adobe Print Engine has failed to output your data due to an unknown problem

I am currently having a huge problem printing from indesign. I am running CS3 on a hi spec 08 Mac Pro (10.5.2) connected to an Epson 3800 Stylus Pro A2 printer. I keep getting the message <Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem>. I have tried trashing the indesign preferences, I tried a new account... In fact I have just done a clean install of the entire OS. Just can't get it to print. I did have it printing on this machine before and the same document prints from my iMac. The problem seems to be something to do with the print dialogue. If I print WITHOUT checking the Printer settings in the Print dialogue is sends to the print, but the output is shocking as the paper selection is not right and uses photo black not matt black. When I DO check the printer settings and set it all correctly it gives me the <Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem>. Anyone else had this or have any thoughts?

I am seeing this error too, but I've narrowed it down to an isolated set of circumstances. My client has begun rolling out Active Directory integration with Macs on their network. Here are the specifics:
-- Mac OS X 10.5.4, IDCS3 5.0.3
-- Using the Directory Utility, Macs are bound to AD with using the mobile account option (user folder is cached locally on workstation, hosted on the network)
-- The message immediately pops up after clicking 'Print' button in print dialogue.
-- Printers are a couple of different versions of DocuColor (250 and 260) with Fiery RIP front ends. Print queues are hosted on an AD print server and listed as Open Directory under Kind in the Add Printer dialogue.
-- Only IDCS and ILCS3 (13.02) exhibit this problem. PSCS3 (10.01), Acrobat (8.1.2) and Safari do not have the same issue, so it appears to be Postscript related
-- Printers not going through AD (IP or BonJour enabled HP B&W lasers) print successfully when logged in via the networked user. Logging into a local admin account resolves the problem as well.
-- This issue appears on freshly imaged machines, G5s and MacBook Pros, not just an isolated workstation. So its possible there is a problem with the source image, but it was created by another office and I'm just a consultant onsite at another location trying to sort things out. Other workstations still using Thursby's Dave software for file and printer access, running 10.4.11 do not exhibit same issues.
-- The console output lists this error when ID fails:
7/23/08 3:28:59 PM /Applications/Adobe InDesign CS3/Adobe InDesign CS3.app/Contents/MacOS/Adobe InDesign CS3[1374] passwordCallback: didn't find keychain item for "ipp://localhost/printers/DC01_Fiery250_5th";prompting for it
I have created a keychain entry to match this with no success.
-- None the suggestions in linked KB doc. resolve the issue. But that doc seems to be outdated as it references CS 1 and 2 versions of ID.
So, has anyone seen the same issues? AD integration appears to be the common thread, but I cannot find the cause.
Shawn Punga
Senior Systems Consultant
MacLab

HP Deskjet 2050 3 in 1 - has ink will not print

HP Deskjet 2050 3 in 1 - Windows 7
I have run the print/scan doctor, alignment and cleaning options. The printer engages as it is printing but there is no ink on paper. Cartridges seem clean and fresh ink will come out of cartridges. Unable to print color or black ink. Thank you in advance

Hello ebbevans,
Welcome to the HP Forums.
I see that you are having an issue with the printer not printing black of coloured ink.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP 3IN 1 Deskjet 2050-scanning problems.

9/5/2014
Hello. I have a 3 in 1 HP Deskjet 2050 H510 printer. It has always been a relaible printer. Today, I decided to use it as a scanner. I downloaded the approprite software, scanned, and sent it off. All was well, BUT the machine will not release the original job, so that I may use it for another scan or printing operation.
Thanks so much!
Shecat

Hi shecat,
Welcome to the HP Forums!
I noticed that your HP Deskjet 2050 H510 printer will not release the original scan job. I am happy to help you with this scanning issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this scanning guide. A 'Scanner Failure' Message Displays on the All-in-One Control Panel and You Cannot Scan, Copy, or F....
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printer start-up problem. HP Deskjet 2050 All-in-One J510 series. Part# CH350A

Whenever I first turn on printer it immediately prints a page and says I need to scan the page and realign it. Also, the colors are somewhat faded looking.
This question was solved.
View Solution.

Hey RedDave,
If the unit is printing an alignment page on each start up, then the unit is failing to align. If the unit fails to align, then it will attempt to do so on the next start up. Do you get an alignment failed message on the computer screen?
I would advise following the steps in the document linked below to troubleshoot this condition in your Deskjet 2050 J510 series All-in-One.
'Alignment Failed' Error Message Displays on the Computer
Let me know how it goes,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Acrobat X Pro doesn't see HP Deskjet 2050 scanner

I'm running OS X 10.6.7. Recently installed an HP Deskjet 2050 all-in-one printer / scanner. Both are working fine, however Acrobat X Pro (v. 10.0.2) doesn't recognize the scanner, so I'm unable to create PDFs from it. The printer driver is up to date.
I saw in the forum that there is a similar problem with Acrobat 9, there said that the same has been fixed in Acrobat X. However, I'm still having this problem and I don't know how to fix it. The Acrobat online help is very poor, didn't find support for scanners.
Solutions, comments, suggestions? Thanks in advance!!

I'm not really sure there's anything you can do. I have a low-end HP all-in-one printer/scanner (got it free when I purchased an iMac). I wasn't even expecting to scan to PDF. But when I brought up the File > Create > Scan from PDF, it was just there. There was no special installation required. It was just a scanner driver that Acrobat X Pro could recognize. I guess all I can suggest is looking for other HP printer/scanner drivers or calling HP Support.

HP Deskjet 2050 J510 series Scan All in One

The drivers are installed. I get an error message when trying to scan: The HP Deskjet 2050 J510 series Scan was not found . It is not identified in the "devices and printers window. There is an icon on my desktop, when clicked, the above message is given. If you have any suggestions, it would be appreciated.

HI ooh,
I would like to help you be able to scan from your Deskjet 2050 J510 series printer.
Please use the HP Print and Scan Doctor. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
Source: Try the HP Print and Scan Doctor for Windows
Click here to download and run the utility > HP Print and Scan Doctor
Please let me know the outcome of the tests perform, you will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
I look forward to hearing from you. Knowing the outcome of the Print and Scan Doctor will help to point us in the right troubleshooting direction!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Apple IMac 27 has a problem. Random black screen. Over 1 year without any fix

Apple IMac 27 has a problem.
Random black screen.
Over 1 year without any successful fix.
IMac 27 10.8.4 (12E55) - bought in 2010
3.06 GHz Intel Core 2 Duo
4GB 1067 Mhz RAM
Graphics ATI Radeon HD 4670 256 MB
The IMac computer screen goes black randomly but the machine still running beyond.
In order to go back to normal i need to awake the computer by hitting with the pointer a hot corner previously created " sleep mode" ( top left ).
..the black screen would come back after one second again..and then again and then again and then again..with different intervals..sometime 2 seconds after the other, sometime as soon as appears the user login screen.
I took the machine to an Apple Store two times over one year, they opened, cleaned it but they didn't replace anything has they could not understand what they real problem was. I was happy for that because they didn't try to make me spend money on something which was not going to solve my issue for sure.
Last time i kindly asked them to inspect everything meticulously, part by part, i left the machine with them for over 2 months. They couldn't understand why this was happening..after couple of weeks, 5 more machines came in with the same problem.
On some of them., upon request of the client they changed the graphic card but apparently this was not the fix, the problem come back again. Apparently changing the graphic card or the screen or else it didn't solve any problem to anyone. I'm almost thinking to "trough it out of the window"..we all spend money for this machines and i think we need to know if Apple is looking in to this or not.
Lately i tried to do an SMS RESET and PRAM RESET, it feels it got better a little but problem still coming back.
Also, all usb devices are disconnected and the problem still there
Below you will see a copy of the console report. I honestly don't understand much of it as i'm not a computer guy.
27/07/2013 11:03:39.837 WindowServer[119]: Created shield window 0xb3 for display 0x04272d40
27/07/2013 11:03:39.837 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:39.906 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:41.701 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.702 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:41.704 WindowServer[119]: Created shield window 0xb4 for display 0x003f003d
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2002), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:45.186 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[740]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:45.208 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:03:52.117 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:53.763 WindowServer[119]: Created shield window 0xba for display 0x04272d40
27/07/2013 11:03:53.763 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.838 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:53.883 WindowServer[119]: Created shield window 0xbb for display 0x003f003d
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:55.209 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[742]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:55.252 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:04:04.482 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:04:04.482 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.483 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.704 WindowServer[119]: Created shield window 0xbf for display 0x04272d40
27/07/2013 11:04:04.726 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:04.795 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:05.245 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.246 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:04:05.253 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[744]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:04:05.249 WindowServer[119]: Created shield window 0xc0 for display 0x003f003d
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
I'm now thinking to try to take the machine to its original firmware and see if it still does it, does anyone have any sugestion?
I use a lot photoshop and other image software, this computer is essential for my work. For more then one year this issue caused me problems.
Luckly i have a Macbook Pro too and i managed to do some of my work there. At last I was thinking to buy an external screen and attach it to the Macbook pro in order to work on my big images. But who wants to spend money again!!!???? This is not a fixture, this is silly. I wish to have my IMAc working again.
The warranty it's obviously over and this problem happened right after the warranty was over...
I write this post because i'm so tired of this issue and online nothing can be found apart from posts from so many people that have the same problem and no fixture has been found.
The only fixture seams to be to buy a new computer... Ole'!!!..new money flowing in in the cashier!! forget it!!! i would rather change company if apple doesn't respond to this.
For over 10 years i have been a Apple owner..
When this problem appears it's like someone it's playing a joke at you...
Comments welcome..
Thanks

Hi, I've seem to have found out the source of the problem.
The issue is related to heat, and an iMac 27" gets hot pretty fast.
If I boot the iMac straight after first start into Windows 7 I seem to get a lit built-in display at all times. I can also boot OS X first and then into Windows 7 and the built-in screen get lit every time as long as the iMac isn't hot.
Strange thing is that the monitor connected to the display port gets lit every time. So I can only assume that the heat only interfere with output to the built-in LED screen.
So this iMac is going to an Apple premium reseller for service, and I'll tell you guys how it went.

Firefox was working on my new iMac but then, after switching on recently, won't connect to the web – whereas Safari has no problem.

===
Hi
I bought an iMac a week ago and installed Firefox via Safari. It worked fine for a while but, after a recently switching on, it won't connect to the web whereas Safari has no problems.
I've tried following the Firefox Help, looking into the iMac firewall, but still no luck.
I've no idea whether related or not but yesterday I had a system glitch where the iMac stated no wi-fi was installed and only connected via a physical lead to my house router. Also, there was no sound output via Safari. However, after booting up today all seems well – apart from Firefox still not working. It loads the start page but can't access the web.
I have Little Snitch running, and wonder if that's the culprit... but it's working fine with Safari, seemingly.
(Finally, how do I stop a dialogue box appearing on start-up saying that "To open “X” you need a Java runtime. Would you like to install one now?)
Any ideas anyone?
Cheers
Rob / Sheffield / UK
===

On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP. In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa. You may find the following Apple Support article helpful.

HP LaserJet 1018 has a paper output jam, but i found nothing

Hi.
My HP LaserJet 1018 has a pop-up window: The HP LaserJet 1018 has a paper output jam. Please follow the instructions below"... I did took the print cartridge out, but I see nothing(no paper) inside. And error still occur. What can I do?

Follow the troublshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Where to buy in India ink cartridge for deskjet 2050 bought from Dubai

I bought HP DESKJET 2050 MODEL NOJ510a product no CH350C FROM DUBAI AND WAS USING CARTRIDGE NO 122.
NOW I am in India and that no cartridge is available.
What shall I do. Computer shop salesman said it is not available and to get from Dubai.
Oto.
This question was solved.
View Solution.

Hi Oto,
In India you should buy both the Black and Color 802 HP ink cartridges, then you should contact HP support and reset the printer for your region:
http://www8.hp.com/in/en/contact-hp/phone-assist.html#section1
Be aware that by resetting the printer for India only the 802 ink cartridges will be accepted by the printer unless you will reset it back for another region in the future, as well be aware that this process is limited and cannot be done more than 2-3 times for the device.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

PPro CS4 - ImporterProcessServer.exe has encountered problem, unknown error

Hi,
I'm using XP SP3, RAM 3GB, CS4 Master Collection Trial Version 30 days.
New comers CS5 is in 64 bit, so is not our option, our PC only 32bit.
We going to buy CS4, but seems during product assesment not so impresive.
During Exporting/Encoding video, import from mix .swf, .jpg, .avi. but most of time came out error message "ImporterProcessServer.exe has encountered problem ... ". Check on log file Unknow Error
- Source File: C:\DOCUME~1\Martin\LOCALS~1\Temp\Video1_1.prproj
- Output File: C:\Documents and Settings\Martin\My Documents\Adobe\Premiere Pro\4.0\Sequence 01.wmv
- Preset Used: NTSC Source to High Quality Download
- Video: 720x480, 29.97 [fps]
- Audio: 96 kbps, 48 kHz, stereo VBR
- Bitrate: Compressed, VBR, 2 Pass, :0, Avg 1500.00 [kbps]
- Encoding Time: 00:06:45
5/20/2010 5:40:09 PM : Encoding Failed
Error compiling movie.
Unknown error.
I have look thru the previous posts, but I still not sure what is the real problem, H/W spec problem, Windows problem, or CS4 Trial problem?
From prev post I conclude some posibilities:
Need to troublehost, http://premierepro.wikia.com/wiki/Troubleshooting
CS4 more problem, downgrade CS3 is option, CS3 no problem
Windows C++ problem, need to reformat.
etc.
If we have to thoubleshot then problem, I just need to edit the video.
So should we proceed to buy CS4? Otherwise will try other product.
We have 2 general around, Gen. Bill Hunt and Gen. Harm Milaard, hope can give enlightment.
Thank you.

How to ask questions the smart way

My hp deskjet 2050 hasa a problem output tray closed

Similar Messages

Maybe you are looking for