My HP Deskjet 3070 All-IN-One printer is not working !

The wireless radio on your HP printer is currently turned off. How do I turn it on . HELP!

Information is in the manual.
Turn wireless on or off.
1. Press the Wireless button to display the
Wireless Menu.
2.From the Wireless Menu, select Wireless
Settings.
3.From the Settings menu, select Wireless On/
Off.
4.From the Wireless On/Off menu select On or
Off.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please

do you mean the printer? ive already tried that without success any further help apprecaited

HP Deskjet Ink Advantage 2515 All in One Printer is not working

Please help me to fix my HP Deskjet Ink Advantage 2515 All in One Printer. Before it is ok to use it, but after a couple of months when I dont have an ink I didnt use it. As of today I have an important papers to scan but when I try to plugged in the outlet my printer power is off but the two lights in fit to page are on and also the attention light is on. I use to plugging it again on and off from the cable wires but still the same case. I try to push the power on but it doesnt work. Please help me. Thanks in advance. :-(

Hello Folks,
Welcome to the HP Support Forums! I understand you are not able to print to your HP Deskjet Ink Advantage 2515, the power button is non responsive.
I would like you to start troubleshooting here: The HP Printer Does Not Turn On or Respond When the Power Button is Pressed
Please let me know the outcome, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Deskjet F4435 All in One Scanner undetected, not working

I have Mac O S X 10.6.8, and the deskjet F4435 all in one. My printer is working fine. I am having issues with the scanner. I open the scanner and it gives an error message, "Failed to open session on the device." I already uninstalled all the hp software and reinstalled it. The scanner used to work by using photosmart, scan, except now it searches for device and doesn't detect it. Please help me fix this problem.

Hello @computerilltrit , welcome to the forums!
I saw your message, and I am hoping I have a fix for the issue you are having with scanning on 10.6. Below are the steps I would recommend that you try, and also do them in order they are written.
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Download and install the Full Feature Driver here which contains scan software: HP Deskjet Full Feature Software and Drivers - Mac OS X v10.4, v10.5, and v10.6
Try scanning from the HP software and you should be able to scan, fingers crossed!
Let me know what happens!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Photosmart C3180 All-in-One printer -- SCANNER not working.

I have had this HP Photosmart C3180 All-in-One printer for a couple years and all is well. HOWEVER, the one function not working properly is SCANNING. I can print fine and copy fine. But when I go to scan something my power button flashes for about 10 seconds and then stops. Nothing happens, and nothing scans. HP said it was not the printer itself, but something to do with my operating system through Apple. I have the current 10.5.6 version of Leopard.
If I can get any help from others I'd appreciate it!

HP provided this link to software which resolved my scanning issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55009-3 &lc=en&dlc=en&cc=us&lang=en&os=219&product=1146331

I just upgraded to mac osx lion and my 7410 all-in-one printer will not work

I cannot get my hp officejet 7410 all-in-one printer to work with Mac OS X Lion

hi,
check this link for Mac 10.7 installation guide.
l0ri3
~Though I work with HP my posts and replies are my own and not from HP.~

HP Photosmart C6180 All-in-One printer will not work

Printer worked one day and the next day it did not and now will not turn on. I did not turn it off. It went off all by itself. Only 3 years old and not over used. Have checked outlet and power cable. Green LED light comes on when connected to outlet but as soon as I connect it to the printer, the light goes out and the printer will not turn on. Is it dead?

I have the exact same problem
Where do we find a solution

HP Deskjet F4435 all-in-one, scanner is not working

I am able to print and copy, but I cannot scan.
I tried the HP Help Doctor which didn't help. I tried the online download.
After or during the process I received the following error messages:
       A required software component was not found or was improperly installed. Reinstall the HP Photosmar software        that came with the device, and try scanning again.
       Adobe Flash Player Active X Setup:   Failed to install. For troubleshooting tips, please see http://www.adobe.com/go/tn_1966
       [.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21770
IconResource=%SystemRoot%\system32\imageres.dll,-112
IconFile=%SystemRoot%\system32\shell32.dll
IconIndex=-235
A required software component was not found or was improperly installed. Reinstall the HP Photosmart software that came with the device, and try scanning again.   Hide extended eror information: 8, [8,0,0] My response: I have attempted to download the HP Deskjet F4400 series disk. The scan code is CB745-10004. Windows (r) 2000, XP, Vista, Windows 7Version 13.0.0    Copyright 2009 HPDC. There was a grinding noise, but I don't believe it ever downloaded or whatever.   Under the downloads I found the following message on the desktop Notepad: [.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21798
IconResource=%SystemRoot%\system32\imageres.dll,-184     I don't know what that means.
I believe I have a USB connection, I think.   I have a USB cord that connects my laptop to my computer. I have high speed internet through ATT. Sorry, I am so technologically impaired!
The attention light blinks a steady blink, not fast in my opinion. The power light is on. There are no messages in the window. There is no issue with the copy settings.
61 files currently on the disc
Other
My operating system is WINDOWS 7 HOME PREMIUM.

Thank you for this information.
Yes, I do. I would like you to preform another Level three Uninstall on your computer:
a) Click the start menu, in search programs and files type in %temp%
b) Locate the correct folder starting with "7z" (the correct folder contains "Util" and "CCC" folders).
c) Open folder "Util".
d) Open folder "CCC".
e) Please run the L3uninstall.bat.
f) When the uninstall has completed, restart the computer.
Next, when the computer comes back on, please perform a clean boot on your computer. Follow this Microsoft document here to help you. This helps eliminate software conflicts that occur when you install a program or an update or when you run a program.
Please uninstall Adobe Flash Player from programs and features on your computer. Once this is complete, you can install the latest Adobe flash Player here.
Now, install the full feature software by using the Printer Install Wizard. This will find the appropriate software for your computer. If you're still receiving the same problem, then running the Print and Scan Doctor again. Let me know if this utility diagnostic or fixes a scanning issue.
I will be looking forward to hearing from you again!
I worked on behalf of HP.

My 8600 all in one printer wireless not working

Dear Sir or M'am
The computer had been working properly until now. This am I have already printed today with no probs).Now it shows wirelees is off and locked says system administrator needs to correct. I am the only one who uses this computer

Welcome to the forums @captainpatty ,
I saw your post and I would like to help you! I am first looking for some more clarifying information from you, just to make sure I understand the situation you're in.
Where are you seeing that the "administrator needs to be correct"?
Are you seeing this message on the computer screen or the printer display?
Is it asking you for a password?
Have you tried any troubleshooting, and what have you tried?
Please let me know what you're seeing and I will do my best to help.
Have a great Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

After upgrading to Mac OS 10.9 My HP Deskjet F4580 all in one printer no longer scans. How can we fix it?

Hi All,
I recently upgraded to Mac OS 10.9 Mavericks, but now my HP Deskjet F4580 All in one printer will not scan any documents either as PDF or as JPG, how can we fix this?

I have simialr problems, after i scanned the ducuments or pictures, i can save it for only once, but the file is just black pictures with many lines through them. When i try to save it again, then it says ''An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.', which then doesn't allow me to do anything of saving the file or even just to print it out.

Deskjet 2540 all in one printer - does the scanning work with Mac OS Yosemite 10.10.1 ?

I was trying to scan a document using this new printer and my Mac OS Yosemite 10.10.1 and I cannot even find the page that allows me to scan since now it is all through the computer. Is this printer compatible with this operating system? and if so, what can I do to see the page where the file actually shows up to scan?
thanks,
Natali

Hello NatDeskjet2540,
Welcome to the HP Support Forums!
Regarding your inquiry into scanning with 10.10 and the Deskjet 2540, I would like to help. The software you need to install is here: HP Deskjet 2540 All-in-One Printer series Full Feature Software and Drivers. Once installed, you can access the the walk through here: Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers.
Hope this help, let me know.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Deskjet 3050A All-in-one printer J611 series - mavericks and wireless set up

Hi
I have a HP Deskjet 3040A All-in-one printer J611, I have had this printer for about 2years and everything worked perfect then I bought an Apple still all was alright but when I updated my software I got Mavericks and ever since then everything went wrong....I have updated my computer and have AirPrint now and also HP ePrint(currently). How ever the printer was not working or connecting.
Problem 1:
When I tried to fix the problem I uninstalled all HP drivers to reinstall - found that you have to install the apple app Done!(Airprint)
The printer was picked up by the computer and I can scan but I can not print, I'm using the USB cable, and when I print the computer shows it is printing and the printers lights come on but nothing happens(no messages display on the printer) then the computer shows the print is done - but the printer didn't print. Scan is working fine.
Problem 2:
Because of constant problems with the wireless connection I wanted to reconnect it to the router - Restore default.
But now because I don't have the HP drivers, I have no idea how to connect it and I tried both connection ways WPS is not working when I press it on the route...nothing happens and the PIN, where are you suppose to enter the pin, nothing comes up on my computer (USB connected)
I have read the installation pages over and over but can't figure out what is wrong, any advice would be appreciated.
This question was solved.
View Solution.

Hi Lilly4,
I can certainly help you get the printer on the network and working again.
Follow the steps in this thread to put the printer on the network without using the software or the WPS button. I believe we have success doing it this way.
If you continue to experience an issue after the printer is on the network, please let me know. Thanks.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Problem in Printing with HP Deskjet F370 All-in-One Printer

Product Name and Number: HP Deskjet F370 All-in-One Printer
Cartridge Number: Black - HP 21 Black Inkjet Print Cartridge (C9351AA)
Colour - HP 22 Tri-color Inkjet Print Cartridge (C9352AA)
Operating System Installed: Windows 7 Home Premium (64 Bit)
Hi,
I am using HP Deskjet F370 All-in-One Printer. Recently I am facing a critcal problem.
I am unable to print anything in red or brown colour.
The cartridges are in good condition with more than 80% ink level in color cartridge and 65% above in black cartridge.
I have done alignment of printer cartridges and also reset the printer.
However after that, I have taken a test print which works fine. I can print in black or any other colour expect red and brown.
Whenever I am trying to print anything in brown it is coming out in green colour.
I don't know what to do....Please help.
Thanks
Suvadeep Paul
Thanks
Suvadeep Paul

Hi there,
This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Deskjet 3050 All-in-One Printer series - J6

HP Deskjet 3050 All-in-One Printer series - J6? what a load 0f rubbish,only one place for this the bin!
Purchased less than a year ago countless problems with wireless reinstaled more times than I can think and now paper jams so off to the bin, never to buy HP products again, being disabled is hard enough but having to going shopping for a new printer this I could do without. thank you HP.
Brian

I am sorry to hear that you are having that issue with the printer. If the printer is under a year old from the date of purchase, please call into HP Total care. The printer comes with a factory warranty that gives the owner free tech support on the product. Paper jams are a hardware issue. If all troubleshooting steps are done on the phone with the agent and the product is still not working. That agent who is assisting you will be able to give further options on what can be done. The number for US and Canada customers is 800-474-6836. Customers in other countries can find contact information here. I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

My HP Deskjet 3070 All-IN-One printer is not working !

Similar Messages

Maybe you are looking for