My hp deskjet f4180 device driver failed to install to my windows 7 computer even with the updates.

really need help asap i would greatly appreciate it.

Have you downloaded the Windows 7 drivers from HP here?  If this is the driver you are using please give some additional details of the error messages you are seeing.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

    Summary:
    I have installed Windows 7 Ultimate x64 on my G580.  Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
    Details:
    I bought lenovo G580 with Windows 8.  Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64.  Everything is working fine but my WLAN card is not recognized because of lack of driver.
    The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
    I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error.  I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
    Error -  "BCM4313: Can not find setup file"
    Drivers Tried:
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028105
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028208
    Any help about how to get past this error will be appreciated.  The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder.  Let me know if I can copy a specific file from there.
    Thank you.
    BJS
    Solved!
    Go to Solution.

    Download this driver bcm4313
    Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
    And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

  • Pod Touch 32GB MTP USB device has failed to install and can't sync.

    After updating iTunes on my Win7 64bit PC, when I plug my iPod Touch 32GB in, I get the error message "MTP USB device has failed to install" and can't sync. Yesterday, everything worked well.
    Need help, please!

    Thank you. I removed iTunes, QT, Safari and related software, then applied a Windows update and reinstalled iTunes and related software. It solved my problem and let me sync my iPod.
    Thanks!

  • To add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC

    Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB

    4Buck5 wrote:
    Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB
    I am not 100% what isn't allowed.. but I am assuming you want to spread the backup across the two disks.. internal TC and 6TB external.. this is not possible.. It has to be one or the other. TC has no way to build a raid JBOD or anything else. Nor would you want to as that is the most likely to fail and kill your data.
    Let me add, backing up 6TB over USB on TC.. will be the most excruciating experience of your life.. cf child birth or passing kidney stones.. large ones.. being the male equivalent.

  • Itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

    itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    Try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I had my itunes library on an external drive, I now have a new Windows 7 computer. How can I access my library?

    I had my itunes library on an external drive, I now have a new Windows 7 computer. How can I access my library?

    Hello, robertfromboulder city.
    Thank you for the question.  You can direct iTunes to read your media off your external drive.  To do this, follow the instructions below.  See the section in the first article labeled Discovering and changing the iTunes Media folder location.
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/ht1751
    Cheers,
    Jason H. 

  • Bought a new iMac 27" yesterday.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applicati

    I bought a new iMac 27" yesterday, running with Mavericks OS.  Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?

    update manually,:  http://www.adobe.com/downloads/updates/

  • HT1923 how do you get the dvd drive back after installing itunes to windows 7

    How do you get the dvd drive back after installing itunes to windows 7??

    Safari/Preferences/General and set a new default.

  • HT4059 I can't open my books with the update, says failed to load book because the requested resources is missing.  Please HELP.

    I can't open my books with the update, says failed to load book because the requested resources is missing.  Please HELP.

    If you can't open a particular ibook then try deleting it from the bookshelf via the Edit button at the top right of the bookshelf, and (assuming that it's still in your country's store) redownload it via the Purchased tab in the ibookstore in the app (or if you have a copy of it on your computer's iTunes library sync it back from there).

  • Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    Hello, give this a try...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

  • Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

    I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
    Event ID: 10005
    Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
    Event ID: 1008
    The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
    first DWORD in the attached data.
    Any idea why I receive this error?
    Thanks
    Mike

    Hi,
    Please refer to this article:
    SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
    http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
    Alex Zhao
    TechNet Community Support

  • HT1420 I have a number of devices linked to a single iTunes account. Of these devices, two of the originals were computers whose hard drives failed and I was unable to die authorise them before the failure occurred. Is there a way of deauthorising them on

    I have a number of devices linked to a single iTunes account. Of these devices, one was a laptop whose hard drive failed, and one was an iPad which died. My question is if it is possible to remotely deauthorise these devices or is it necessary to deauthorise all devices on the account and then reauthorise those devices which are still current.
    Thanks
    Tan Anu

    iPads don't count in the number of authorisations, only computers count. Individual computers can only be deauthorised directly on them, but if you have 2 or more computers authorised then you can 'deauthorise all' (which you can only do once every 12 months) and you can then reauthorise the computers that you still have and need (deauthorising a computer doesn't remove any content from it).

  • Apple Mobile Device Support fails to install, remains unsolved.

    i came back to the forums after a coupld of months, and this issue is still unsolved, will support please read this and answer us, it seems i am not the only one with such problems. so i will repost this issue here hoping to find a solution.
    Thank you.
    Reading through the forums, i found many with this same error, some said reinstalling solves this problem, but for me, and many others, it did not, so here is a log of the installation where the error shows, please look at it and tell us wheat to do,
    Action 8:21:17: InstallFiles. Copying new files
    Action 8:21:18: MsiRollbackInstall.
    Action 8:21:18: MsiInstallDrivers.
    DIFXAPP: ENTER: InstallDriverPackages()
    DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
    DIFXAPP: 'CustomActionData' property 'UI Level' is 5.
    DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
    DIFXAPP: 'CustomActionData' property 'componentPath' is C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\.
    DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
    DIFXAPP: 'CustomActionData' property 'installState' is 2.
    DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
    DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
    DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-1605124395-1919374747-2981180892-1004\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-1605124395-1919374747-2981180892-1004') ...
    DIFXAPP: INFO: ENTER: DriverPackageInstallW
    DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
    DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
    DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
    DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
    DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
    DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
    DIFXAPP: InstallDriverPackages failed with error 0x52
    DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
    Action ended 8:21:20: InstallFinalize. Return value 3.
    Action 8:21:20: Rollback. Rolling back action:
    Rollback: MsiInstallDrivers
    Rollback: MsiRollbackInstall
    DIFXAPP: ENTER: RollbackInstall()
    DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
    DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
    DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
    DIFXAPP: 'CustomActionData' property 'installState' is 2.
    DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
    DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
    DIFXAPP: This was the component where the install failure occurred. The rollback for this component must have already occurred at the time of failure. No need to rollback again
    DIFXAPP: Rollback failed with error 0x2
    DIFXAPP: RETURN: RollbackInstall() 2 (0x2)
    Rollback: Copying new files
    Rollback: Moving files
    Rollback: Creating folders
    Rollback: Removing system registry values
    Rollback: Deleting services
    Rollback: Stopping services
    Rollback: Updating component registration
    Action 8:21:41: Rollback. Rolling back action:
    Rollback: MsiInstallDrivers
    Rollback: MsiRollbackInstall
    DIFXAPP: ENTER: RollbackInstall()
    DIFXAPP: 'CustomActionData' property 'DIFxApp Version' is 2.1.
    DIFXAPP: 'CustomActionData' property 'componentId' is {9AA3828A-F852-11DB-8E29-6C6B55D89593}.
    DIFXAPP: 'CustomActionData' property 'flags' is 0x17.
    DIFXAPP: 'CustomActionData' property 'installState' is 2.
    DIFXAPP: 'CustomActionData' property 'ProductName' is Apple Mobile Device Support.
    DIFXAPP: 'CustomActionData' property 'ManufacturerName' is Apple Inc..
    DIFXAPP: ERROR 0x2 encountered while opening persistent-info key for component '{9AA3828A-F852-11DB-8E29-6C6B55D89593}'
    DIFXAPP: Rollback failed with error 0x2
    DIFXAPP: RETURN: RollbackInstall() 2 (0x2)
    Rollback: Copying new files
    Rollback: Moving files
    Rollback: Creating folders
    Rollback: Removing system registry values
    Rollback: Deleting services
    Rollback: Stopping services
    Rollback: Updating component registration
    Action ended 8:22:00: INSTALL. Return value 3.
    Action ended 8:22:00: ExecuteAction. Return value 3.
    Action 8:22:00: SetupCompleteError.
    Action start 8:22:00: SetupCompleteError.
    Action 8:22:00: SetupCompleteError. Dialog created
    Action ended 8:22:03: SetupCompleteError. Return value 2.
    Action ended 8:22:03: INSTALL. Return value 3.
    === Logging stopped: 1/11/2008 8:22:03 ===
    MSI (c) (10:8C) 08:22:03:595: Product: Apple Mobile Device Support -- Installation failed.
    now i went to the directory where the driverfiles should be, and paused the installation just before it starts rolling back and made a copy of the whole thing, the driver files are being extracted, and thinking it may have failed to find them, i restarted the installation and paused it after it extracted the files, copied over my backup files to where they should be, and resumed, same thing happened, failure again.
    I stopped all the services running, (msconfig / startup and services) and that still did not help, i went through my registry for every "apple" and deleted it, after uninstalling all apple products, that did not help, i ran windows install clean up and made sure that quicktime and itunes and apple updatea re not installed, did the whole thing again, no luck.......
    Can someone please tell me what is going on, i can run it just fine on my other machine, which is running windows xp pro as well, the only thing different i did on this one was that i plugged in the Iphone before installing the software, whereas i ran the itunes installer on that one before i plugged in the iphone, and yes, i did get the iphone driver as a camera at first, and i changed it later by pointing the update driver to the same directory where applemobiledevicesupport extracted the 3 driver files :
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    and the files are usbaapl.cat , usbaapl.inf, and usbaapl.sys
    please look into this issue, i've done everything i could think of,
    Thank you.
    Windows XP Pro

    *"will support please read this and answer us"*
    These are user to user forums. Apple employees do not take part in them.

Maybe you are looking for