My HP deskjet F4288 printer on the panel shows all lights ON when put on.

hi, When i connect my HP deskjet F4288 printer it shows all the lights on the control panel. does not go off till i disconnect the power cord. It does not even detect on the laptop.Need help.

It would be nice to know what application. For word/office
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

How do i install HP deskjet 3510 printer without the disk to my laptop

how do i install HP deskjet 3510 printer without the disk to my laptop

Hi,
You can download from the following link:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId...
Full Feature Software and Drivers is the one you definitely need first.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off. It also prints this way. How can I print the whole picture?

When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off. It also prints this way. How can I print the whole photo?

After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
Hope this helps!

ICM paper profile not showing up when I go to the print modual and select icm check the box show all

The icm profile that I installed shows up in the printer profile. I select it then enter the print button at the bottem select my printer open the propertied and when I select icm in the mode window advanced check the box show all profiles, The only profiles that show are the one that came with the printer not the one that I installed and did show back in the printer profile.
What am I doing wrong?

To see all profiles in Lr you have to click on the two small triangles besides the profile selected in the Print Job panel.
See Screen shot:
Then a list of profiles will appear. If you don't see the profile you are looking for in this list, click on <Other> at the bottom of the list. This will take you to the folder where al profiles are installed, and if your profile is in this folder you should see it there.
If you still don't see it then it's a CMYK profile. CMYK profiles show up in Photoshop but not in Lr.
BTW: If you want Lr to manage colors you have to select a profile where it says <Profile> in the Print Job panel and not by clicking on <Print>.

Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, lik

Hi,
Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, like video controls before 1st activation) and not the blank white box- if no, I guess I have to activate all sound icons before doing a print run?thanks)).

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

When i log onto the internet a box come up on the bottom "show all content" how do i stop this

When i log into windows a message comes up on the bottom of the screen "SHOW ALL CONTENT" how do I stop this message from coming up it is so annoying.
This question was solved.
View Solution.

Hi,
Close any open Internet Explorer windows.
Open windows Control Panel, open Internet Options, click the Security tab and click Custom Level. About half way down, under the heading Miscellaneous, there is an entry for 'Display Mixed Content' - click Enable and then Ok, then click Apply and Ok in the previous window.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this.

I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this. There are over 1800 photos and about 100 videos, any help to locate where they've gone would be appreciated.

Try to search with a Smart Album for photos and videos taken with an iPhone:
File > New > Smart Album:
Add an EXIF rule fro the "Add Rule" drop down menu: EXIF
and set it to "Camera Model includes iPhone".
Set the scope of the search to "Library"
If there are any iPhone images or videos in your library at all, this search should find them. Then ctrl-click any of the items and select "Show in Project" from the contextual menu.
Generally, Aperture should be showing your last import in the "Last Import" smart album in the "recent" section". And the "projects" view can be sorted by date, so you should see your recent imports.
You may want to check all search fields, if searches are active.

How to stop the dock from showing all hidden images when hiding then showing applications

How to stop the dock from showing all hidden images when hiding then showing applications

It's not really something to snap a screen shot of. I believe it would need to be a video clip. For instance, when I am working on multiple images in Photoshop, I often need many images open at the same time, but I only have one image viewable and active. The hero image is active on screen while I hide the other images in the dock by hitting the yellow - button on the images. Then I "Hide" Photoshop to do something in the Finder. When I go back to Photoshop, every image that is hidden in the dock will pop open again in the active window, not just the image I was currently working on. I want these images to stay in the dock until I need them, no matter how many times I Hide the Show Photoshop.

When i open a file the pictures show at bottom, but when I click on a pic it only shows a triangle with a ! in the center

when i open some files the pictures show at bottom, but when I click on a pic to open it only shows a triangle with a ! in the center

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

I have done a little experimenting: 1-close all open windows (I found that I had to do this step in order to keep Safari from hanging-will be explained later). 2: Remove all data in Prefs. 3: Immediately close the prefs window (no window should be open at this point) and quit Safari. Try to complete step 3 fast as possible; I have it down to a few seconds. The reason I urge you to close all windows is that Safari hangs until forced to quit upon immediately quitting after removing cookies. I think the auto page reload in Lion is the cause of these hiccups but I can't be sure about that. The hasty quit I found is crucial to success. Don't know why that is but it could prevent the data from re-populating. A quick flush, if you will. Hit me back if you need any of my suggestions clarified; a bit wordy, I know

Is it normal for the Panels to make slight noises when applied with some pressure such as opening the and closing the Mac? It sounds like the screws are not tight enough or is it normal?

Hi, My Mac is around 2 months old, and I have recently come across a slight problem. I've experienced some slight noises happening such as when I open and close the macbook it makes some sort of clicking noises as if to say the panels are loose or have not been screwed properly... It only happens when pressure is applied e.g. when I am typing I tend to rest the palms of my hand on the two plain sections of the mac (next to the track pad) and this causes some sort of pressure to push down to the connecting panel underneath, this is when the clicking sound happens.
I don't know maybe I'm just expecting too much or it might just be what I think it is, anyway if anyone has experience this issue, feel free to share your point of views or past similar experience. Thanks.

Yes.. It's been a while, but I remember thinking the same thing!
Below are a couple of other links where folks reported the same thing!
http://discussions.apple.com/thread.jspa?messageID=5755300&#5755300
http://discussions.apple.com/thread.jspa?messageID=6552175&#6552175

When printing playlists the writing is all compressed ?

When printing playlist the writing is compressed & completly unreadable ?

Hi sherrie1949,
Have you looked at the Knowledge Base article [[Firefox prints incorrectly]]? There is some good troubleshooting information in there. I would suggest that you try resetting your print settings.
Hopefully this helps!

I have installed wireless printer via the time machine/airport extreme base. Added the printer via the bonjour. There are times when the printer will display a black plug and won't print. I have to uninstall and then reinstall the printer.

What does the black plug display mean?

Get an Airport Express. Plug the printer into the AE with a usb cable and set up the AE to be part of the network (get an IP address from your router). You can get an older AE inexpensively on eBay.

Print link on report shows 'no data found' when LOV has not been used

Hi all,
I have a simple standard report that queries data based on the value in a Select List. This Select List allows users to pick a year for the report. The LOV has a default of TO_CHAR(SYSDATE,'YYYY').
If I open the page using the associated Tab everything wotks OK. However, if I open the page via a button on my home page, the prink links fails:
The page opens OK, the select list defaults OK and the report shows the correct data. However, if I click on the 'Download as CSV' or 'Print' links I get 'no data found'.
If I update the LOV to 2010 everything works. If I set it back to 2009 evenrything works. I just cant get it to work when I open the page.
I have tried adding computations to get this to work, but this does not seem to help.
Any ideas?
Thanks,
Martin

Hi,
It would depend on what has been added, if anything, to the redirect. The redirect should just function as though you had typed in a URL into the address bar and pressed Enter. The page doesn't get submitted, so any data entered onto the page itself is, unless it is already in session, lost. A button, however, should submit the page and Apex will store all values in the session. So, if the value you need for the LOV is from the previous page, then this is the preferred method - but, note, that the redirect can also store values provided the page item name and the value is included in the redirect's URL string
Andy

I have multiple episodes of the same show that I want to put in season specific folders

How do I create Folders in iTunes that will show up on my AppleTV, ie. Season 1, Season 2, etc??
I have all my episodes saved in a Torrents file in my Windows 7 PC, then I click and drag them to the iTunes Folder.
I tried to put all the Season 1 episodes into a Folder in Windows 7 on my PC, and hoped that would show up on the AppleTV, but instead they were not recognized at all and couldn't access them to watch them on the TV. So, I put them back to individual episodes and they are available again. But I would really prefer to not have to scroll through the entire file library to find an episode. I want to organize them by making Folders/Headings for the Seasons of each different show.
Can I create the Folders in the Torrents file, then click and drag them to iTunes?

It never ceases to amaze me how questions on the forum are like buses, none for an hour then three come along. Not your fault but this was asked just a couple of days ago.
When your developers issue a new version you need to save a copy of the source, we just zip it up. Then you carry on editing for the next version and zip that up and go again.
Then when a change is required to an older version, you dig it up, amend it and zip it again.
Not sure how it works with source control. The above is easier and reliable, assuming you manage it tightly.
See www.grainge.org for RoboHelp and Authoring tips

My HP deskjet F4288 printer on the panel shows all lights ON when put on.

Similar Messages

Maybe you are looking for