My HP DVD-RAM GH40L SCSI DVD burner will burn CDs and DVD+Rs, but it will not burn DVD-Rs.
I have only tried to burn CDs and DVD+Rs before, and both work fine, but when I tried to burn a DVD-R, it failed. I put the same blank DVD-R in my HP notebook computer, and it burned it just fine. This happened twice, so it is not the DVDs. I uninstalled and reinstalled the burner with device manager, but still have the same problem. Is there a firmware update or something that will fix this, or do I just have a defective burner? Thanks!
See This Older Discussion...
Burning TV Shows/Movies
Similar Messages
-
Hp DVD-RAM UJ8DB SCSI CdRom Device
Have a Pavilion 17 Notebook PC with a hp DVD-RAM UJ8DB SCSI CdRom Device as the optical drive. I want to upgrade to a blu-ray burner with Lightscribe, but having trouble figuring out what would be a compatible device.
Hi,
Same post as:
http://h30434.www3.hp.com/t5/Notebook-Hardware/Upgrade-to-blu-ray/m-p/2969329
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Hp DVD RAM UJ8C2 SCSI CdRom Driver
Hi All,
My HP Proliant DL360 G9 need the driver for the HP DVD RAM UJ8C2 SCSI in order to works in WinPE environment.
Appreciate provide the driver file in .inf format.....
Many thanks in advance & have a nice day.Hi,
Same post as:
http://h30434.www3.hp.com/t5/Notebook-Hardware/Upgrade-to-blu-ray/m-p/2969329
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts? Additionally, what does 'File' 'Finalize Project' do?
Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead. -
I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?
Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't. -
Have a .mp4 video and would like to use it to burn to a disc and be able to be played on a DVD player and a .AVI file what program should I use idvd?
iDVD may or may not work with them – depending what kind of MP4 and AVI each is.
Drag them into iDVD and preview them to check compatibility.
If there are issues, use MPEG Streamclip and re-wrap them as QuickTime.
Russ -
Won't read DVD movies but will read CDs and Data DVDs
Subject says it all. The iBook will read CDs and data DVDs just fine. When a movie DVD is inserted the DVD player will start up just fine but when the play button is pressed a message comes up saying the the disc is not supported. If it's a software problem where can i find the drivers to fix it.
Could it be the Region Codes for playing DVDs have all been used
in that machine, and so the remaining code(s) do not match the
discs you have been trying to play within it?
Or does this problem also occur when attempting to play non-region
non-commercial DVD movie discs in the computer?
If the DVD Player has run out of region codes, there is a way to
hack or change the defaults; but the one I've read about does
require the DVD player firmware to be changed for it to work.
The one I've read about (but have not tried) is named Region X.
There are limitations and details, so even after messing around
it may not work; if that is the problem in the first place.
One of these only works if you play a DVD from a "region-free"
DVD drive; so this may be an external drive, not inside the Mac.
So, if the hardware has a defect, that's one thing. If the drive
has seen too many region player changes, that's another. If
the lens is semi-dirty, it may not read or record some media.
All of these kinds of things have been noted by people online.
Sometimes a search may yield some fringe findings by folks
who've unusual issues with their equipment, if not mainstream.
Perhaps some software such as Region X for Mac may help,
if not, there may be other options if the player isn't defective.
Region X for Mac:
http://www.macupdate.com/info.php/id/13801
Good luck & happy computing! -
A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac. Aren't all Macs alike?
A DVD (mpg file only) comes up on my MacBook and Dell PC but not my iMac. Aren't all Macs alike? I was told by a couple of experts to copy the file on my MacBook and then send it to my iMac. But shouldn't my iMac show it now if my little Mac does?
Zap the PRAM and Reset the SMC, then pop in the DVD again.
-
Latest firmware for HP DVD-RAM GH40L ATA Device - DVD Burner - please
HP Pavillion Slimline s5280a Home PC
Operating system Windows 7 - Home Premium
Error Message: Failed to burn disc - Can not burn end of disc at once
Have made many enquiries to date, and the best solution so far seems to be my 'Firmware' for the product in question is out of date?
Have tried to download driver updates from HP - but with no success!
Can anyone offer any solutions...thank you in anticipation.Here is the link to the latest firmware version RB0E for your drive.
http://ftp.hp.com/pub/softlib/software11/COL32643/pv-80854-1/sp44462.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
[solved automagically]dvd burner detected... but I can not burn! :(
Hi!
In the latests kernel upgrades (3 or 4 weeks) I lost my dvd burn capabilities...
it was working previously...
apparently dvd drive is detected properly, I can see dvd contents, etc... but brasero do not give me an option to burn on it (just shows .iso file)
that is happening in my desktop, and laptop too.... any idea?
Last edited by luuuciano (2009-12-14 16:09:05)yep, I tried wodim --scanbus with the same result (as root too)
here, the lshw output:
# lshw
azuloidesk
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 32 bits
capabilities: smbios-2.4 dmi-2.4 smp-1.4 smp
configuration: boot=normal chassis=desktop cpus=2 uuid=A0C9C96D-8DFE-D511-98A0-001D60839382
*-core
description: Motherboard
product: M2N-MX SE
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev x.xx
serial: MS6C79B33905155
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 0403 (08/20/2007)
size: 64KiB
capacity: 448KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu:0
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+
vendor: Advanced Micro Devices [AMD]
physical id: 3
bus info: cpu@0
version: 15.3.2
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 1GHz
capacity: 2600MHz
width: 64 bits
clock: 200MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy cpufreq
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 128KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 2MiB
capabilities: pipeline-burst internal varies unified
*-memory:0
description: System Memory
physical id: 29
slot: System board or motherboard
size: 2GiB
*-bank:0
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-cpu:1
physical id: 4
bus info: cpu@1
version: 15.3.2
size: 1GHz
capacity: 1GHz
capabilities: cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 1MiB
*-generic UNCLAIMED
physical id: 123
bus info: parisc@123
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
resources: ioport:900(size=256)
*-serial
description: SMBus
product: MCP61 SMBus
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: driver=nForce2_smbus latency=0
resources: irq:10 ioport:dc00(size=64) ioport:600(size=64) ioport:700(size=64)
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: nVidia Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
*-usb:0
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:20 memory:dffff000-dfffffff
*-usbhost
product: OHCI Host Controller
vendor: Linux 2.6.31-ARCH ohci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub slots=8 speed=12.0MB/s
*-usb
description: Keyboard
product: USB Keyboard
vendor: CHESEN
physical id: 4
bus info: usb@2:4
version: 1.10
capabilities: usb-1.10
configuration: driver=usbhid maxpower=100mA speed=1.5MB/s
*-usb:1
description: USB Controller
product: MCP61 USB Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
resources: irq:21 memory:dfffec00-dfffecff
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.31-ARCH ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-2.00
configuration: driver=hub slots=8 speed=480.0MB/s
*-pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: nVidia Corporation
physical id: 100
bus info: pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
resources: ioport:e000(size=4096)
*-multimedia
description: Multimedia audio controller
product: SB Live! EMU10k1
vendor: Creative Labs
physical id: 6
bus info: pci@0000:01:06.0
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=EMU10K1_Audigy latency=64 maxlatency=20 mingnt=2
resources: irq:19 ioport:ec00(size=32)
*-input
description: Input device controller
product: SB Live! Game Port
vendor: Creative Labs
physical id: 6.1
bus info: pci@0000:01:06.1
version: 0a
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=Emu10k1_gameport latency=64
resources: irq:0 ioport:e880(size=8)
*-multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: nVidia Corporation
physical id: 5
bus info: pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
resources: irq:23 memory:dfff8000-dfffbfff
*-ide:0
description: IDE interface
product: MCP61 IDE
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
resources: irq:0 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
*-bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
logical name: eth0
version: a2
serial: 00:1d:60:83:93:82
size: 100000000
capacity: 1000000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 duplex=full ip=192.168.0.33 latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII speed=100MB/s
resources: irq:27 memory:dfffd000-dfffdfff ioport:d480(size=8)
*-ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
logical name: scsi2
logical name: scsi3
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list emulated
configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
resources: irq:23 ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=8) ioport:cc00(size=4) ioport:c880(size=16) memory:dfffc000-dfffcfff
*-disk:0
description: ATA Disk
product: ST380013AS
vendor: Seagate
physical id: 0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: 3.18
serial: 3JVBP8E2
size: 74GiB (80GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=2d172d17
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: e4ab96d3-fb4d-4eb6-b1ab-3349147e44a3
size: 14GiB
capacity: 14GiB
capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized
configuration: created=2008-10-30 13:28:14 filesystem=ext3 modified=2009-11-24 14:14:40 mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback mounted=2009-11-24 14:14:40 state=mounted
*-volume:1
description: Windows FAT volume
vendor: MSDOS5.0
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
logical name: /mnt/winxp
version: FAT32
serial: 2ce5-cee4
size: 5141MiB
capacity: 5145MiB
capabilities: primary bootable fat initialized
configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,errors=remount-ro state=mounted
*-volume:2
description: Linux swap volume
physical id: 3
bus info: scsi@2:0.0.0,3
logical name: /dev/sda3
version: 1
serial: b5b78777-7852-4575-a8c2-7b8e57283778
size: 1027MiB
capacity: 1027MiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@2:0.0.0,4
logical name: /dev/sda4
size: 53GiB
capacity: 53GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux filesystem partition
physical id: 5
logical name: /dev/sda5
logical name: /home
capacity: 53GiB
configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=writeback state=mounted
*-disk:1
description: ATA Disk
product: WDC WD1600JS-55M
vendor: Western Digital
physical id: 1
bus info: scsi@3:0.0.0
logical name: /dev/sdb
version: 02.0
serial: WD-WMANM1362942
size: 149GiB (160GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=013e1410
*-volume
description: Windows NTFS volume
physical id: 1
bus info: scsi@3:0.0.0,1
logical name: /dev/sdb1
logical name: /mnt/enos2005
version: 3.1
serial: c8bfcbc3-28a7-5d4a-b1f4-ef372f1b6da6
size: 149GiB
capacity: 149GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2005-12-12 22:57:50 filesystem=ntfs label=ENOS2005 mount.fstype=fuseblk mount.options=rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 state=mounted
*-pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:24
*-pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:25
*-pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:26
*-display
description: VGA compatible controller
product: C61 [GeForce 6150SE nForce 430]
vendor: nVidia Corporation
physical id: d
bus info: pci@0000:00:0d.0
version: a2
width: 64 bits
clock: 66MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:22 memory:de000000-deffffff memory:c0000000-cfffffff(prefetchable) memory:dd000000-ddffffff memory:dffc0000-dffdffff(prefetchable)
*-pci:4
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k8temp
resources: irq:0
and, looking at that, the k8temp do not work properly, it shows an error at startup (that happened in the latests kernel upgrades too, I guess)
Currently I have this in my fstab (as it was working previously)
/dev/cdrom /media/cdrom auto iocharset=utf8,ro,user,noauto,unhide 0 0
/dev/cdrom1 /media/cdrom1 auto iocharset=utf8,ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
but I tried commenting those lines without not luck
Last edited by luuuciano (2009-11-24 21:34:49) -
I have a Mac Book Pro 2.4 GHz Intel Core i7; Memory 4 GB 1333 MHz DDR3
Mac OS X Version 10.7.5
I updated to iTunes 12.0.1.26 and I am trying to burn a playlist and I get the following message: "Disc burner or software not found" . I have burned lots of CD's and DVD's before and this is the first time I get this message and cannot burn anything. Can anybody help me, please?Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I transfered all my music to an external hard drive, and changed the location in the preferences options in itunes. I can add music to the library, i can play music and make play lists, but I cannot burn a cd. What's happening, and what can i do to fix, or get around this problem?
Ok. progress...
So is your media folder called iTunes Music or iTunes Media? And does it have a folder called Music inside it?
Before going any further you should first attempt to use File > Library > Organize Library > Rearrange files in the folder "<Media Folder>" (ignore if grayed out). This will make sure that any iPod Games or Mobile Applications get placed inside the iTunes Media folder which is needed for portability.
If your iTunes Media folder is called iTunes Music, close iTunes, rename the folder as iTunes Media and start iTunes again. iTunes will automatically adjust. Close iTunes again.
On your external drive rearrange the folders that you have already copied there so that they match the layout in your active library. You should end up with a folder called X:\iTunes where X: is the external drive letter, and the media folder is X:\iTunes\iTunes Media. If the library layout was upgraded then you will need to create a Music folder inside this and move all the artist folders and Compilations into Music. You will also need to copy iPod Games and Mobile Applications from your internal drive into the new media folder. Next copy the files iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork from the internal drive into X:\iTunes. The preceding manipulations should make the internal and external copies of your library match without you having to copy all of the media over again.
Now hold shift as you start iTunes. Click choose, browse to and open X:\iTunes\iTunes Library.itl.
Finally use File > Library > Organize Library > Consolidate files. This will ensure that any stray files that might have been added from outside your original media folder will be copied into the new one.
You can now reclaim the space used by your library on the internal drive, however before you do so I would advise you to obtain another external drive and make use of this backup tip.
tt2 -
I have burned 3 audio cds and none of them work in my computer or car.
I have burned 3 audio cds from my mac and none of them work in my car or computer and the last time I made a cd 3 weeks ago everything worked fine. Help is it the new itunes 10????
What type of disc did you burn? Audio CD, data disc or MP3 disc. To play in the car, it's best to choose audio CD.
-
What do I need to do to correct the problem. Unistalling and reinstalling iTunes has not helped. I have PowerToGo on my HP. I can burn through this program but want to do so by iTunes. Any Suggestions that would help? Diagnostics for iTunes states that "No driver found" E:hp DVD A DH16ACSH.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I have created an album of phots, moved into order I want to burn, cd and dvd. It burned out of order in album and also added pictures not in Album highlighted to burn. Also was hard to view all pictures and move more quickly into order to view. I am use to using powerpoint and shows all slides at 1 time small thumnails so easy to move
Re the order on the DIsk:
When you export from iphoto you are in the Finder and that doesn't have the same sorting options as iPhoto. There is no "manual" sorting in the Finder, for instance.
Here's one (of several) way(s) to do what you want:
Make an Album of the photos, then drag the pics into your preferred order.
Then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
Then File -> Export and in the Export dialogue set the Filename to "Use Title"
Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.
Burn that to the disk.
I'm sorry but I haven't a clue what the rest of your query is about.
Regards
TD
Maybe you are looking for
-
How can I restore my Address Book from Time Machine, iCloud keeps overwriting
This was all done on my MacBook Pro, using Mavericks updated. With the Address Book, and iCloud. Ok, this is really a mess. I have close to a 1,000 contacts in my address book. I'm not going to manually sort them. I have a bunch of groups in my a
-
Hi I recently moved my itunes to a new computer by using a external hard drive. However my itunes music is not all playable. over 4000 songs have a ! mark and when tried to be played or copied to ipod or iphone, it says that this song cannot be foun
-
How do I activate the Adobe update notification icon on my Top Toolbar?
Hi, I am running Design Premium on Snow Leopard. A friend also has Design Premium and on his system a small "A" Adobe icon with a number next to it appears on the toolbar at the top of the display when Updates are available from adobe for any of his
-
Condition Limit per material group
Hi all, This is Puneet here, I have a requirement from customer to control manual changes for a condition type with sum tolerance % that is based on the material group. However i can maintain upper limit or lower limit for a condition type but that
-
I cannot open Import-2 which is all of my old mail....aol is my preferred mail on my MAC. Help please. Thanks.