My HP laptop will not start at all.
I have a HP G6000 laptop that will not start at all , i turn on the power and only see the blue light on , the screen is still black , minutes later my laptop restarts , but again with only the blue light on with the screen still black , anyone got any suggestions on how to resolve the problem , thanks.
found a solution ! , not pertinent though :
1. turn laptop on
2.hold the " FN " key and run your finger across all of the top keys ( F1 F2 ... )
3. after a few seconds while doing this your laptop will turn on , worked for me
Similar Messages
-
Satellite L450D-13U will not start at all
Yesterday the screen on my L450D when blank and then the machine closed down.
Now it will not start at all.
There are no lights on display when the power cable is attached.
When the start button is pressed all that happens is there is a momentary flash of the On light (not sure if that's the right name) and the DVD light.
You can also hear the fan starting up but that immediately goes off.
That's all that happens.
I've tried without the battery, tried discharging the battery.
Has my laptop just died?
Is there any hope or should I just move on?I will agree with checking your RAM.
The best way to do so before you buy anything is to check each stick.
Remove the battery and AC cord, and press the power button several times to make sure the system is fully discharged.
Once it is discharged, ground yourself and pull the RAM cover. Remove the top stick ONLY. Plug the laptop back in, and try to boot it.
If you get nothing, swap the stick you pulled for the one that is still in the system, and try again.
After that, if it still does not want to boot up, take it to a shop. It could be something as simple as the BIOS battery being dead, or a burnt out power mosfet. -
Hello , i have a t410 that i am having issues with ..
when the laptop is shut down through windows completly it will not start at all .
i have read through some forum issues that where similar to mine but did not help..
when i remove the cmos battery and after 20-30 seconds plug it back in , then the laptop will start and work fine , but it asks to put date and time in BIOS ..
it will work for hours , no problem , but once shut down , it will not start back up again until the cmos battery is taken out and put back in ..
if i am in windows , and i choose to RESTART laptop , it will restart , but this problem only happens when i go to complete shut down .
i hope i am making sense .
Thanks in advanceHi Kalashalula,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not powering ON after shutting down on your ThinkPad T410.
Please let me know have you performed power drain option?
Which version of BIOS installed in your system?
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?
Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
My Laptop will not start - it's a 4 year PC and it's runing on XP.
When I start I get this message" The Logon USer Interface DLL failed to load - Contact your administratoe to replace the DLL or restore the original".
How do I fix so I can start my windows.
Thanks,Hello -
Try this:
- When you receive the error message that is described in the "Symptoms" section, click Restart.
- Press F8 repeatedly as your computer begins to restart. This triggers the Windows Advanced Options menu.
- Use the arrows on your keyboard to select Last Known Good Configuration, and then press ENTER.
(Also, You can try Safe Mode and do a "System Restore" from there.)
***Last Resort, you will have to edit the registry and this may prevent your computer from booting***
- boot your system and tap away at F8
- Select Safe Mode
- After Windows loads into safe mode.
- Start >> Run >> “regedit” Press Enter.
- Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon
- Look for the GinaDLL Key
- Select and delete this key and this key ONLY. DO NOT delete the entire Winlogon folder of keys.
- Close Regedit with the RED "X"and reboot the machine
****Although I am an HP employee, I am speaking for myself and not for HP.****
****Click the White Kudos star to say thanks****
****Please mark "Accept As Solution" if it solves your problem**** -
Firefox will not start at all ... not even profile mananger will start
After an auto overnight reboot initiated by a Windows update (XP 5.1 SP3) Firefox will not start at all ... not even Profile Manager ... all that happens is a few seconds of hourglass on the cursor and then nothing ... this is happening on two different computers at the same time ... identical symptoms ... any advice?
== After overnight reboot by auto Windows updateI had the problem after I restarted the computer when Firefox indicated that was needed to install updates. After that every attempt to start Firefox resulted in no response at all. I went to my program list and found Firefox Safe Mode. That started OK. I then closed it. After that Firefox started OK.
Bob G. -
Ipod touch will not start at all
ipod touch will not start at all...I have tried everything...it got really hot and then went dead
What does: " will not boot at all, it is blocked " mean?
-
Laptop will not start just see spinning wheel
I was installing latest update of OSX and lost internet connection now laptop will not start just see Apple logo and spinning wheel. What to do?
Took it to the Apple store and they hit command r to restore from an restore disk and then ran disk utility to repair permissions and then installed the OS. I did not loose any apps or files thank goodness.
-
HELP urgently needed: My Sandberg FireWire for Laptop will not start on my T60
Let me start with information on my T60:
OS information: Microsoft Windows XP
OS version: 5.10.2600 Service Pack 2
Processor: x86 Family 6 Model 14 Stepping 8
Memory: 3.135.856 kb
BIOS version: 2.09 (79ETC9WW)
Machine type-Model: 1951A47
I have just got a new Sandberg FireWire for Laptop, a PC Card with 3 6-pins connectiont. After inserting the card in the PC Card slot, the Windows Device Manager tells me that there are problems with the card. Looking at the 1394 Card Properties the status says:
"This device cannot start. (Code 10) - Click Troubleshoot to start the troubleshooter for this device."
The troubleshooter did not solve my problem. I have tried disconnecting, re-connection, shut down Windows and start again etc.
At Sandberg Help Desk they tell me that I have two slots in my laptop, one with a 16 bits bus and another with a 32 bits slots, and I should use the latter. It seems that I can use the lower slide only in my laptop and I cannot push the card into the upper slide. There is not enough room for it.
Here is what I found on Lenovo's support site on my type & model:
PC Card
Conforms to the PC Card Standard 95
Type II slot
Both the 16-bit Release 2.1 card standard and the 32-bit CardBus card are supported.
Have a look at these screen captures.
What should I do to solve my urgent problem!?
Message Edited by pbl_ibm on 10-09-2008 05:10 AM
Message Edited by pbl_ibm on 10-09-2008 07:27 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AM
Message Edited by pbl_ibm on 10-09-2008 07:45 AMgarytr23 wrote:
Sounds to me like a driver configuration problem. Maybe something bad happened during driver install. I would recommend uninstalling the device from device manager by right clicking on it and hitting uninstall. Reboot the computer. Have a go at it again. Also, test your pcmcia port functionality by finding and plugging in a different card. See if that works. It might need repair.
Message Edited by garytr23 on 10-09-2008 09:41 AM
The status right now is:
The PC Card reader works on my T60
If I use a Firewire PC Card it will not start - as described above (on T60)
The PC Card work properly on my T61P - and I succeeded importing a video file from a digital camera using the Fireswire PC Card.
So what does a wise man do in this situation??
Please help me as I urgently need to know how to solve this serious issue!!
Have you got an idea? Can I import the video in another way??
Message Edited by perbuch on 10-12-2008 07:55 AM -
Finder folder with question mark, now will not start at all!!!
Hey guys, I was working in Avid and i opened up Quicktime, all of a sudden i got a crash log. So i restarted, upon restart i got the finder folder with the blinking question mark. I tried restarting with the OS9 cd by holding down the C button, no luck there. So i moved onto the next step, resetting the PRAM, no luck there (just sat on black for numerous minutes until i let up, then the folder came back). Then I moved onto resetting th PMU, now it will not start up at all. I restart, and all i see is a black screen, nothing. Any help appreciated. Thanks in advance.
The machine im workin on is a Powermac G4 (quicksilver), OS9, 1.5 G Ram, machine bases around Avid Editing system
RhynoOk let me clarify this.
1)system crashed restarted and got the folder with the ?
2) tried to boot from the OS 9 CD no luck? it did not boot?
3)reset pram and still the flashing ?
4) Reset the PMU chip and the mac is dead won't start up at all?
a couple of ideas too...
did you press the pmu button more than once?
Check to make sure the power cord is plugged in correctly etc.
Check the Pram battery to see if it might be dead it should read between 3.3v and 3.7v
also try to restart the computer without other devices plugged into it (USB Firewire, keyboard, even monitor.
hmm...
iBook G4 Mac OS X (10.4.3) -
My mac book will not start at all
Suddenly my mac book pro will not turn off. first it started with the computer cutting off rather than going to sleeep then it started cutting off while I was using it. I became worried that there was a problem and went to back up the hard drive on an external hard drive but suddenly the computer would not start at all. before that happened i would get the gray screen with the dial and a bar underneath. Help!
See if these support articles help:
http://support.apple.com/kb/TS1587
http://support.apple.com/kb/TS1367
Ciao. -
New versions of Firefox will not start and only bring up the crash reporter. I've tried starting in safe mode, I've deleted/created new Profiles and I've uninstalled/installed Firefox over and over. I can still download 28.0 and it has no problem opening. Below is the latest Crash ID from 35.0
Crash ID: bp-4ac8fb2d-9a2a-4a6a-a9e4-06cc42150125hello sid.robinson, this crash is caused by the "Digital Guardian" software by Verdasys that is running on your computer. Please see if there's an update available for that program.
-
My MacBook Pro will not start at all., My MacBook Pro will not start at all.
The only previous problem was a few days ago the colors on my display looked a little off/fuzzy. I immediately restarted and the problem didn't return. Then today, I had it shut but when I opened it it was off and will not start again. It sounds like it's on as there's a slight fan noise, also the charge lights go up to fully charged. But there is no noise or anything when I try to start it.
I'm not sure if this is a coincidence, butt I started using a new charger today. It was second hand but the same one as before.
It was purchased in early 2012, not sure what OS. Any help is appreciated!Reset PRAM. http://support.apple.com/kb/ph14222
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Test with another charger. If this does not help, contact Apple.
Best. -
HT201412 ipad will not start at all?
My Ipad shut itself down suddenly and will not start again.....I've tried everything I've seen online but nothing has changed.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Firefox crashes - will not start at all
If I try and start Firefox all I get is the Mozilla Crash Reporter, if I try and restart Fireofox from the Crash Reporter screen all I get presented with is the Mozila Crash Reporter again. If I try and submit a crash report the Crash Reporter states "there was a problem submitting your report", hence no crash ID available.
The issue started when I updated my old, maybe version 5, Firefox with version 9, since then I have been unable to start Firefox.
I have tried unistalling Firefox, including deleting personal settings, and restarting the PC in between deleting Firefox and attempting to reinstall it. None of this works. Firefox will also not start in safe mode.
Mozilla Crash Reporter details added to the below Troubleshooting Information info box.Does Firefox start if you boot Windows in Safe mode (press F8 on the boot window)?
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up
*http://kb.mozillazine.org/Firefox_crashes
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
Maybe you are looking for
-
Def of dunning area and valuation area
hi, pls tell me the exact defintions of dunning area and valuation area,
-
How do I back up my iphone5 to my ICloud account, whqen iI have forgot my restrictions password. My restrictions pass code has my icloud a account greyed out? Can i backup to a wd external harddrive, or try to backup to a new mini-mac, I just purchas
-
IPhone 5 Battery is a Bust and the Fixes Won't Help
You can setup your new iPhone 5 as a new phone, and it's not going to solve the problem of battery drain. I tried both ways. First, I restored by 3Gs backup to the new iPhone 5, and then I wiped the new iPhone 5 and set it up as a new phone. There ar
-
Run OC4J 903 on linux in the background?
I am relatively new to Linux and have been trying to start OC4J either automatically or as a background process (so that I do not have to keep the terminal window open). I tried "$nohup java -jar oc4j.jar &", but OC4J still shuts down when I logout o
-
Problem in FontMetrics.stringWidth method
Iam trying to set the width of a table column with the value calculated using FontMetrics.stringWidth method. But the stringWidth method doesn't return the proper value. The string gets truncated while displaying in the table. Here is my code: Font o