My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit.

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit. I can copy and print only. Thanks.
This question was solved.
View Solution.

Hi,
Is the printer connected to your PC by USB or network?
By using USB connection, you may scan using the Windows Fax and Scan software integrated into your OS.
Scanning through a network connection unfortunately supported on Windows7 32 bit only, as you may find listed within the About network scanning section below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136#A2
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Newly bought HP 7520 e-all-in-one does not scan in color on mu Mac OS 10.9

Help need, totally frustrated.
Just installed a brand new HP 7520 e-all-in-one on my new MAC OS 10.9. The product prints and copies in color. However all scans come out black&white??? Who can help me, desperate in time constraints. I have the printer USB connected.
Elske
This question was solved.
View Solution.

Hi,
The default scan workflow configured to scan documents as Black and White. Make sure to change the scan settings to scan documents with color:
1. Open the HP Utility and select your device.
2. From Scan Settings open the "Scan to Computer".
3. Click the Scan Tasks tab.
4. Select the affected shortcut and click on Edit... (or just double-click the shortcut).
5. In the section of Scan from an HP Device click on the blue triangle or the Show Details button to enlarge the menu.
6. From the enlarged menu now open the drop-down menu next to Mode
7. Now select the Color option and then click on OK to save the changes. The next scanned document using this workflow will appear in color.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Installed HP Officejet 4100 All-in-one does not appear in Control Panel printer selection window.

My HP Officejet 4100 Series 'All-in One' DOES NOT APPEAR in the Control Panel window even after several re-installs. The diagnostics indicate that the 4100 is not connected and dos NOT point to any path for a solution.
Attempts to download a current Driver, ( or re-load the 4100 "software" ), WILL NOT work because the 'help' page states the driver already comes with the 4100 software and therefore does not provide for any download update, (driver or software) for the 4100 printer.
I have reinstalled from the original Disk for the 4100 and also attemped install with Windows Update requested driver. Nothing works.

Hi there @Past77
Welcome to the forums
I read your message about your Officejet 4100 not showing that it's connected, and that you have attempted to run the Windows Update to see if that would help get the printer working again. You are correct that this model does not have a downloadable driver for Windows Vista, so your best bet would be to try running the Print and Scan Doctor tool, to see if it can kick the printer into gear and have it functioning again.
If the tool does not work, I would then recommend looking in to a printer upgrade. Consider giving us a call to see what your options are with HP.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best wishes to you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Lightroom 5.4 does not open, using windows 7

lightroom 5.4 does not open, using windows 7. I downloaded the trail and it does not open. I want to buy it, but i am afraid it will not work. I do not get an error code or anything it just will not open.

Thanks but none of the options in that KB fix the problem.
The "Exit Code" was 3 rather than "0" and so it doesn't look like the patch will install. In terms of the third option, I mentioned in my original message that I cannot "Deactivate" my other CS6 programs because that option is grayed out in those programs. But those programs work just fine (other than Acrobat Pro X) and so I think there may be a bigger problem with all of my Adobe products.

Fax function on all-in one does not appear under Mavericks

I just purchased a new all-in-one printer. I installed it on my network successfully. When adding it to my devices the Printer and Scanner functions appear to function perfectly, but the FAX function (which appears on a Macbook Pro running Snow Leopard) does NOT appear as an option on a Mac Mini running Mavericks.
The Printer is an HP Laserjet Pro MFP M127fn. It is listed as being Mavericks compatible. I have tried deleting it and reinstalling it to no avail. The Printer and Scanner functions apper to work fine (I have not had time to fully test them) but when attempting to add the Fax driver as a Printer the FAX tab is greyed out and will not appear. Again I had no problem installing this on a Snow Leopard machine.
TIA
Sam

Sam ~ Welcome to the Support Communities.
Silversam718 wrote:
I'd like to know if Mavericks does nopt support Faxing...
This Apple doc may help:
OS X Mavericks: Send a fax
...Found by searching for "Fax" here:
http://support.apple.com/kb/index?page=search

My HP Officejet 4315 All-in-One does not print

My HP Officejet 4315 All-In-One printer does not print althoug it is connected to my laptop and working properly
The dial shows the word FAX instead of PRINT. How can I remove the word FAX? because I think this is the prolem
Any one with info pls email me at:[edited email by moderator] Thanks, pedrodomenech

Hello @pedrodomenech , and welcome to the HP Forums, I hope you enjoy your experience!
I can see you're running into fax/print issues.
I would love to help with that, but I need a little information to try and help you first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HP5640 All-in-one does not print photos from Windows Live Photo Gallery

Setup printer using mobile device Installed print driver using provided CD. Updated driver software. Printer is networked by wireless to computer & smartphone.Was able to print photo from smartphone, was able to print Word document from computer. Was unable to print photo from computer using Windows Live Photo Gallery. Used the HP troubleshooter, following all possible solutions to no avail. Selected the option of HP Photo Paper but it defaulted to the 8x11 paper tray. Can someone please help? Thank you!

Hey , Welcome to the HP Support Forums!
I understand that you're experiencing issues when printing from Windows Live Photo Gallery on your Windows 8 computer to your HP ENVY 5640 e-All-in-One Printer, as your prints continue to default to the letter size Paper Tray. I would like to assist you today with resolving this printing issue. Can I please have you follow the steps below to properly configure your print settings under the Print dialogue window in Windows Live Photo Gallery. 1. Load your Photo Paper in the Photo Tray on your printer 2. Open an image you would like to print under Windows Live Photo Gallery 3. Click on File and select Print 4. Under the Print dialogue window please ensure that your printer, Paper Size, Quality, and Paper Type are all set properly for your specific print job 5. Next, click on the Options button on the bottom right hand corner. Under the Print Settings dialogue box click Printer Properties. 6. Next, change the Paper Source to Photo Tray. If it currently is set to 'Main Tray' please click the Main Tray option and it will drop down to allow you to select Photo Tray. Click OK once the Tray change has been made. NOTE: If the Paper Size shows an exclamation mark, it means that your Photo Tray does not support the Paper Size selected. Click the dropdown next to Paper Size and choose a size that does not show an exclamation mark. 7. Under the main Print dialogue window click Print on the bottom right Your document should print as per normal now from the proper Paper Tray. Please let me know if the steps provided resolve your Paper Tray photo printing issue. I look forward to hearing from you. Good luck!

HP Envy 5530 e-all-in-one Does Not Work With Mac

Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix?

I am having the same issue. Did you ever find a solution?

NEW COMPUTER ALL-IN-ONE DOES NOT WORK, OR CAN MY INK BE DRY?

HAVE INSTALLED DESKJET ALL-IN-ONE 250 J410 SERIES IN NEW LAPTOP. JUST RETURNED FROM 5 MONTH ABSENSE. COULD MY PROBLEM BE DRIED UP CARTRIDGES OR? I THOUGHT AT LEAST THE PRINTER WOULD ATTEMPT TO PRINT EVEN WITHOUT GOOD INK. i HAVEN'T FOUND WHERE ON THIS COMPUTER I CAN FIND THE STATUS OF MY INK. CAN SOMEONE HELP?

Hello @evidi,
I understand that you're experiencing an issue printing from your Windows 7 computer to your HP Deskjet J410 series printer. I would like to assist you today with resolving this printing issue. However, I do need to confirm which exact HP Deskjet you are using within the J410 series?
(1) HP Deskjet 1050A All-in-One Printer J410 Series:
HP Deskjet 1050A All-in-One Printer - J410g
HP Deskjet 1050A All-in-One Printer - J410h
(2) HP Deskjet 1050 All-in-One Printer J410 Series:
HP Deskjet 1050 All-in-One Printer - J410a
HP Deskjet 1051 All-in-One Printer
HP Deskjet 1055 All-in-One Printer - J410e
HP Deskjet 1056 All-in-One Printer - J410a
In the meantime, can I please have you click here to download and run the HP Print and Scan Doctor Tool. This Tool will run on your computer and 'fix printing' issues for you. Should any driver, software, or connection conflicts be found than the HP Print and Scan Doctor Tool will attempt to resolve those conflicts for you.
Please respond to this post with the result of running the HP Print and Scan Doctor Tool. Should the issue persist be sure to let me know exactly what HP Deskjet printer you have. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

5610 All-in-one Does not connect to my Dell Laptop so I cannot Print or Scan.

My USB Cable is connected to my printer and laptop. The printer does not want to print even a document from word. When i look at my installed printers it says the document is printing but nothing prints. I also cannot scan. The message I get is that there is no connection between my laptop and my printer. I have no idea what port to use also when adding this printer again. It was working fine before, then somehow I uninstalled the program but re-installed it today. I ckecked that both plugs goes in correctly at the printer and the laptop. It can still make copies. When I want to service the printer it says No Hp Product detected. Please help :-(

Hi @Yogibears,
I can help you with not being able to print or scan on your Vista computer.
Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer. The USB cable shouldn't be longer then 6 feet. Try another USB port on the computer. You might have to try another USB cable to see if that is causing this issue.
I have provided a document to check to see why the USB isn't being detected on the computer to try.
Windows: 'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer Duri...
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

All in one printer not printing on windows 8.1

Hi my HP deskjet 3520 all in one printer used to work then i upgraded to windows 8.1...now it won't print...it shows as a printer in the devices window but does not show up when you ask to print...or sometimes it does but then a pop up window says there is no printer....i have reloaded the software a number of times and it all says it is connected to the wireless network....help please

Give this tool a try, it might help the printing - http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03286146

Scanning with an HP 3390 all-in one laser jet printer using Windows 7 pro (64 bit)

I have recently acquired a Dell Windows 7 Pro (64 bit) OS computer and was wanting to use my HP all-in-one laser jet 3390 printer and scanner. The printer software which came with my HP 3390 will work with my Wind 7 Pro OS computer, however my HP 3390 scanner function will not work using this HP driver software, with my Win 7 Pro OS. I am trying to locate the appropriate HP scanner and/or different printer drivers that will support both the printer AND scanner functions of my HP 3390 printer/scanner, while using my Windows 7 Pro OS computer. Within the HP website, I have not been able to find this type of driver software or support, as least listed as such? I was wondering, if there are maybe no dedicated or described scanner drivers for my situation, is there even another set of drivers which might be intended for other Window 7 Pro OS based computers and other HP printer/scanners, which would work for my situation as well? Does anyone have a solution to resolve this issue via HP driver software or by another method...maybe even 3rd party? Ther has to be a solution?

@ccan
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I'm using windows 7 with a hp deskjet 3059A e Printer All-in-One J611n not scanning pc not found

My Deskjet 3059A e printer all-in-one J611n was working fine til my pc crashed. Now I can't get it to scan. Says computer not found & it is switched on to my pc via usb cable.... Help

Hello @terezaferreira , Welcome to the forums
I read your post about the scanning problems and I am here to help you out.
I would first suggest you restart the computer completely, and power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
Now with both the printer and PC powered on, run the Print and Scan Doctor from your computer and send me a screen shot of the results or write me back with the detailed results.
Try scanning from the HP Software on your computer, and also scan from the printer to your PC. Tell me if either ways worked and what happened!
Have a great Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Office Jet J6480 All In One - will not scan with Mac OS 10.8 .3

I have been unable to get my HP Office Jet J6480 All In One to scan after upgrading to 10.8.3.I have followed other posts and have installed the most up to date driver (http://support.apple.com/kb/DL907) but each time i try to scan from the HP device manager or the photosmart studio, it says "Sorry, scanner could not be intialized. (scanner not found)" I have tried making sure there are no other updates by clicking on settings in the device manager and clicking check for updates but it tells me "server not availalbe - the software service is currently not available. please try again later" and i have gotten this error for the last week.
I followed the second set of instructions found here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve that issue and have installed the software found at the link. I rebooted my computer and am still having the same problem.
Note: My printer is wireless and i have not hooked it up via a cord. Will that make a difference?
My printer seems to be printing fine.
Thank you for any help you can provide.
Sara
This question was solved.
View Solution.

Try scanning from your Mac. Use Image Capture app in your Applications folder.
Click once on the scanner on the left side, then click on Show Details along the bottom. Along the right side you will see LOTS of options for scanning and saving.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Photosmart C7280 All In One printer not campatible with windows 8.1

I have an old Photosmart c7280 all in one printer. I bought a new computer that has windows 8.1. HP doesn't
have software or drivers that can make this printer compatible with my new computer. What can I do besides buy a new prfnter?

Hi,
Please download the following Software and Derivers and install on your new Windows 8.1 machine:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit.

Similar Messages

Maybe you are looking for