My hp laserjet m2727nf will not work until i shut off power and power back on.

My laserjet will not work until i power off then power on after every printing job. It first started happening over the weekend when it sat idle for 2 days. Then it was once a day and now every time i need to print. What could be the problem?

So i didn't read anything about the suggestion about the configuration report?
I would recommand turning off wireless (if it has it), unplugging usb, unplugging network cable, unplugging fax cable. Then i would reboot the printer go to the Menu and in Reports try to print a "Configuration Report".
If it still doesn't print i would unfortunately then may be try resetting it back to factory default. perhaps there is some setting that is causing this issue. Also causes printer to fully reinitialize itself. There should be a button in the menu and setup to set back to defaults.
Let me know if any of that helps and what the results of trying to print an internal report are.
I am an HP Employee.

Similar Messages

  • My ipod touch go of and will not work untill i plug it back in to a ac power

    my ipod touch go of and will not work untill i plug it back in to a ac power

    You likely have a hardware problem like a dead battery.  To rule out a software problem try the following in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

    Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
    It has only happened for the last month or so
    Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

    Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

  • My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders. What else can i do? Please help:(

    My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(

    Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all

  • I inherited an 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?

    I inherited a 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?

    But they work normally when not plugged in?  What kind of power source are you plugging it into? It maybe outputting more than what the iPod can handle.  I had this happen to an iPod I plugged into a powerstrip that was plugged into the cigarette lighter in a vehicle an experienced the same thing.
    B-rock

  • I just switched iphones but my app store and my itunes will not work but i can make calls and texts

    i just switched iphones but my app store and my itunes will not work but i can make calls and texts

    Hi there. How were you able to solve it? I have a one year subscription to EW and I was able to receive a couple of issues. But now, I cannot download the new issue anymore. Please help.
    Thanks.

  • My bluetooth on my computer will not work.  I have checked 'ON' and DISCOVERABLE in system preferences.  I have restarted the computer.

    My bluetooth on my computer will not work.  I have checked 'ON' and DISCOVERABLE in system preferences.  I have restarted the computer. 

    Since you can get them working, at least temporarily, make those Favorites. If that doesn't help, then go into your home folder library and move the following to the Trash (but don't empty the Trash--if this doesn't help, you can always use File>Put Back to restore it to its original location.)
    In ByHost
    com.apple.Bluetooth.<long string of characters and numbers>.plist
    If you do this, you will need to reconfigure your Bluetooth settings. Might take  screen shots of them first (Cmd-Shift-4) Setting up Bluetooth again will create a brand new preference file.
    EDIT:  That's in your home folder library>Preferences.

  • HT201210 My ipad mini is stuck in a continues reboot and will not turn on or shut off. What can I do.

    My Ipad mini was in the middle of an update for the Pintrest app when the upload froze. I tried shutting down the ipad and that seemed to cause it to go into a constant reboot. Now the ipad will not turn on or shut off. Only display the apple sign. Are the any self fix remedies out there to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

    We are all iphone users just like you.
    Do you have a question for fellow iphone users?

  • My LG Spectrum will not stay on, keeps shutting off and turning back on with no signal and shuts off again

    My LG Spectrum will not stay on, keeps shutting off and turning back on with no signal and shuts off again

        Thanks for keeping us posted lizy7796. May I ask did the replacement device resolved the powering concern? Also, how much available device memory do you have after you restored your info onto the new device? If you have any additional questions then as always we're here to help.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Lightroom 4 will not work on OSX 10.6.8 and 2GB ram

    after loading LR 4 i get this message even though my computer meets LR specs:
    "will not work on this computer" does anyone know why?

    What is your CPU? There are specific limits to the type of processors your CPU has.

  • Cs6 help update will not work  sais server is off line or down

    tried  reseting my seting on my adapter but it still will not work.  also tried diabling firewall still no go can some one help me with this please?

    thanks for the reply, I just tried turning off my antivirus program and added CS5 to my allowed programs in my firewall settings with no luck. i will have to contact my service provider to see if they may somehow be blocking CS5. 
    the strange thing is that all my other programs including Adobe Lightroom 3 can access and run their update programs using my current settings.
    thanks for giving me a starting point to figure this out.
    Mike

  • Dv2109nr Sound works and will not mute, after hibernatio​n it will not work until i reboot it

    On my computer lately the sound will work but i cannot press the mute button or turn it down all the way. Then when it hibernates and i go to use it the sound does not work. Also when i plug in my head phones they work but the sound doesn't turn off on the speakers.
    Can anyone help?
    Thanks!

    I had the same issue with my iPhone aswel, first i checked my headphone jack to see if i had set the liquid contact indicator off (which it hadnt).
    Then i did a hard reset:
    - hold the sleep/wake and home button down at the same time
    - the phone will turn off then when the apple logo appears release both buttons
    this worked for a day for me then the issue returned. so what i did after that was backed my phone to itunes anbd restored my phone to factory settings. for the past 2 weeks the issue has not returned.
    hope this helps

  • The error, "Restart Required. Lightroom has encountered a problem with its menus. Some menu commands will not work until Lightroom has been restarted" appears in Lightroom.

    I updated to 5.7 a few days ago and I just now encountered this problem while importing some photos. Is this a common problem?

    Hey Guy's, Thank you for the recommendations to fix his problem and I did restart my browser, etc.. and all was corrected. But, I have been with Lightroom for a while, starting with LR3. I can not remember having one problem, except for my errors, until I started with LR5 and I have some kind of problem hourly! I do not have many presets or plug-ins so I don't think that was really a problem. It crashes constantly, I can edit 4-6 photos and then it starts slowing down and I have to do a restart. It does, on occasion, jump around from the develop controls and even changes modes, crashes and sometimes I just wait it out and it will open in the print mode or slideshow! I find photos all over my computer that it sent on its own. I did download and check for malware and other viruses and none were found so I am still troubleshooting everything from my fairly new computer and everything else but I always think when they come out with a newer version to download, it will correct my problems but they only get worse.

  • How can I recover a project that I optimized? It will not work after the fact. Can I go back in time without the "time machine?"

    I'm freaking out here.  Ok, so I've spent an entire school year filming and editing a video for an afterschool program I work for.  I finally completed the project but was having errors every time I tried to export the movie.  I was advised to optimize all the video clips before exporting the movie so it won't be as much of a load on my computer during the export process.  I did that but now files are missing, all the audio and video clips are not lined up correctly, and it won't allow me to edit anything.  Also, I can't even play back the video anymore.  When I press play, I see nothing and hear audio from a completely different project in my library!  I was told to check in the "iMovie Original Movies" in the "Movies" section of my computer to recover the original, unoptimized movie file.  But nothing is there.  Now I'm stuck with a movie I can't do anything with and all the students are depending on this video being completed.  I do not have a "Time Machine" backup, which I'm regretting now more than ever right now.  Does anyone have any suggestions that could help me???  I'm desperate. 

    All I can think of at the moment is to use the old standby of deleting the preference file. This can often fix problems with iMovie.
    Go to your Home folder <your user name>/Library/Preferences (NOT the Library folder at the top level in Macintosh HD). Similar to Lion, on Mountain Lion (10.8.3), the Home Library folder will be hidden (unlike pre-Lion OS X versions). To access it, click and hold down Go in the Finder menu bar, then press and hold down the Option key on the keyboard - the Library folder will appear in the drop down list. Slide the pointer down to Library and, as you release the pointer, the folder will open in Finder. Now you can navigate to the Preferences folder.
    In your user Library/Preferences folder, locate a file named "com.apple.iMovieApp.plist". With iMovie closed, drag this file to the Desktop. When next opened, iMovie will create a fresh preference file with the default settings (this happens in the background as iMovie is loading).
    If iMovie now opens and appears to be working properly, you can change the default settings in the menu item "IMovie > Preferences", as desired. Also, it's now safe to drag the old preference file to the Trash. Trashing the file will not harm any existing Events or Projects.
    Note that these instructions are for iMovie '11 (the latest version being 9.0.9). For users on earlier versions of iMovie, the preference file has a different but similar name. For example, for iMovie '09 (that's version 8.0.6) the file is named "com.apple.iMovie8.plist". Earlier versions may or may not have a number in the name, for example, "com.apple.iMovie.plist".
    John

Maybe you are looking for

  • Change attachment id in pdf form

    Hi, I have to chande attachment id in my pdf form via javascript, I am trying some ways but nothing work. Change attachement id means attachement stay in formular after changeing. Does someone know how to solve this problem? Thanks, Jakub Cermoch

  • For NW2004s: What is replacing IXSLTransformService?

    com.sapportals.portal.prt.service.xsltransform.IXSLTransformService Hello, Can someone tell us what is replacing IXSLTransformService for the NW2004s? Because it is working in the NW2004 env but maybe it is not working in the NW2004s env. Thanks, Ste

  • Batch Capturing with gap in recording

    So I just spent a lot of time labeling and describing clips. They are all offline. So I go to Batch Capture them and I'm getting the beginning of the tape rather than what I wanted which was in the middle. I discovered that there is some blank space

  • Need clarification on ME2L

    Hi friends, could any one clarify my doubt. In the standard SAP report ME2L and some others the Symbols were used in selection parameters. These are the symbols =         Single Value >=       Greater than or Equal to <=       Less than or Equal to >

  • How to show corporate dashboard in SAP Portal?

    HI, we have requirement to show BOBJ info view corporate dahsboard (three tabs) via SAP netveawer portal. I know we can integrate crystal report into SAP portal but how to integrate whole corporate dashboard from info view? thanks