My hp mini 110-3700 laptop say battery not present

My hp mini 110-3700 laptop say battery not present, but i can see the battery s/n under the system info

Please how can i fix this? I need your help please

Similar Messages

  • HP Mini 110-3700 built-in camera not working

    I just bought my HP Mini 110-3700 (LV831PA#UUF) last january. I just tried using the HP camera twice to check if the image it captures is clear. Yesterday, i will use the camera for a video chat but the messenger said "Cannot detech the camera/ device is not connected).When I had clicked the link for the HP Camera it had open but the light indicator didn't have any light and the camera isn't working.
    I already tried restoring the HP mini to factory settings but after that, the camera isn't working still. What should I do? Need help ASAP.
    Thank you!

    bamba-ista wrote: built-in camera not working properly. what do i need to do?
    How to Troubleshoot iSight (also works with FaceTime and FaceTime HD cameras.)

  • HP mini 110- 3500 laptop fails to boot after SSD upgrade

    Hello,
    I recently bought a "crucial 250gb 2.5 " SSD and 2gb RAM (also by crucial), to upgrade my HP mini 110-3500 laptop, which was exceedingly slow. But unfortunately, the laptop has refused to boot when powered on. What can I do? I am very worried.
    Enkay1

    You answered. That is what I thought. You have DDR3L-1600 low voltage 1.35 volts. Low voltage will run at the higher voltage (1.5 volts) but it is just not the ideal memory for the older hardware. You need DDR3-1333 memory as HP specified for the laptop. You can confirm or refute my diagnosis by putting in the old memory and see if she boots.  This is the part mumber you need: 621567-001 http://www.ebay.com/itm/2GB-COMPAT-TO-621567-001-A3803335-A4100445-A4427375-/230655741975?pt=LH_DefaultDomain_0&hash=item35b4275017  Does your memory have 8 black blocks on the side or just 4? You want 8. Also if you have Windows 7 Starter you cannot use 2 gigs of RAM. If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • My early 2011 MacBook Pro says battery not detected and does not work with a new battery either. Works only with the charger plugged in.

    About a year back i had replaced the MLB of my early 2011 macbook pro and it was all working fine. A month back my battery went dead saying "Battery Not Detected". I went to Ample technologies, Bangalore, India and gave it for diagnosis. Ample technologies are the authorized Apple support service in Bangalore, India. After 3 days and no phone calls they email me that "They feel that the MLB MIGHT be the problem and they want to test it by replacing the MLB and i have to pay for their testing". I had already spent 40k indian rupees ($700) less than a year back to replace an MLB and now they want to replace it again at the cost of 43k ($750) indian rupees. I have no idea what to do now. Spending 80k indian rupees ($1400) in less than a year to replace the MLB twice sounds unfair to me. Can someone help me out here ? Is there a valid warranty period applicable , since i have changed the MLB a year back ?

    short of doing a SMC reset, you maybe at their mercy.
    resetting the  SMC http://support.apple.com/kb/ht3964
    You can try yourself running the Apple Hardware Test- and see if it generates any error codes. Post the results
    AHT  http://support.apple.com/kb/HT1509

  • Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

    Hi,
    I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
    Windows 7 updates recently installed ???
    By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
    When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

    Hey eagle_no11,
    Thank you for joining the HP Support Community!
    I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
    What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
    Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
    Please let me know how these steps do work out for you.
    Have a great day!
    I worked on behalf of HP

  • I have got an iphone 4 and i have plugged it into my windows 8 laptop and a message pops up on the laptop saying usb not recognized, what do i have to do to make my laptop recognize my phone?

    i have got an iphone 4 and i have plugged it into my windows 8 laptop using the usb cable, and a message pops up on the laptop saying usb not recognized, the iphone doesnt say its charging or anything, how do i get my laptop to recognize my phone?

    Start here:
    http://support.apple.com/kb/TS1538

  • WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD??

    WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD ???

    How are you trying to charge it, via a computer or the wall plug ? If a computer, then a lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    If the wall charger then have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then have you tried a different charger and/or cable ? Do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
    And for info typing in capitals is considered SHOUTING.

  • HP Mini 110-1051TU Laptop Bios Password Reset

    Dear Sir
    I have a HP Mini 110 Notebook, but I can't changed my BIOS Password. After using ESC Key three times on Enter CURRENT Password, one error  shown on the post screen.
    Password check failed
    Fatal Error...System Halted.
    CNU938BVPN
    Please Help....
    This question was solved.
    View Solution.

    Hi:
    Try this unlock code:
    e9lofup629
    The third character in is a lower case L

  • Elitepad battery "not present"

    Hi!
    I've got an Elitepad 900 from My mothers job because no one used it. When i plugged in the charger it worked but When i took the charger out it turned into black.
    it says that the battery # 2 is "not present" and the tablet only works when the charger is plugged in. What has happened? Is there anything i can do?
    Hope someone have an answer!

    Hey @Flirret ,
    To get your issue more exposure I would suggest posting it in the commercial forums since the ElitePad 900 is a commercial product. You can do this here HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
    The support page for your product may be helpful in the meantime:  HP ElitePad 900 G1 Tablet.
    I hope this helps!
    Thank you for posting on the HP Forums.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Hp Envy states second battery not present

    My second battery states not present. Please help me to solve this issue. I love this compuuter. And my warranty have already expired.

    @razalijamsuri ,
    Welcome to the HP support forums and thank you for posting.  So that I can better help you with your battery issue, I will need a little more information.  Here are some links to check out first.
    Advice for asking the "Very Best Question"
    Could you post back with your full model and product number.
    How Do I Find My Model Number or Product Number?
    As well when you state a second battery.  Is it an hp original part or is it a third party battery.
    Any information would be great.  Please include your notebooks Operating System as well.
    Which Windows operating system am I running?
    I hope to hear back from you soon.  Have a great day and thank you again for posting.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Split x2 battery not present

    Hi,
    If i have my computer docked in the keyboard, it will not work unless i have the power cord plugged in.  It will keep chiming and the wifi light will blink.  Also then when i do plug it in and click the power icon it shows battery # 2 not present.  Or sometimes it will just show battery #1 and not even show that there is a battery # 2. I've attempted to run the battery check however it only comes back as battery 1 is good and doesn't give me anything for battery # 2.  Any help or ideas would be greatly appreciated.
    Thanks

    Hi ZachHopper,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you have a battery problem. Because it cannot be found you are unable to test or calibrate it.
    I suggest contacting HP support for assistance with this issue.
    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HP mini 110-1116NR laptop fatal error code CNU939DV7 askin for password

    Upon startup it asks for current password. When you enter it 3 times wrong it says fatal error code CNU939DV7. Ive tried every password on the help site but none were for the same fatal error code. Please Help!
    This question was solved.
    View Solution.

    Hi,
               Try the below code
    e9lofo1t6x         (3rd letter is L)
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • HP mini 110-1116NR laptop fatal error code CNU9390DV7 askin for password

    Asks for password upon startup and 3 wrong entries says fatal error CNU9390DV7
    This question was solved.
    View Solution.

    Hi,
              Try the code
    e9lofo1t6x
    "I work for HP."
    Please click the "White Kudos" star to say thanks for helping.
    Please mark "Accept As Solution" if my help has solved your problem.

  • Hp mini 110-3130nr laptop

    when unit is turned on it continually tries to reset bios, need to know how to recover unit. apparently i need up to date
    bios.

    Hello heavylift, welcome to the HP Forums.
    I see that when the notebook is on it keeps trying to reset the BIOS. I will try to assist you with this.
    I'd recommend the following documents in the order provided:
        Restoring the BIOS - this will guide you through recovering the BIOS, in-case of corruption etc.
        Updating the BIOS - this will guide you through updating it, make sure that you've recovered it first.
    Let me know if these were able to help you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Premiere elements does not recognize Blu-Ray disc, says media not present.  Under 12 I was able to record 3 blu-ray dvds using the same burner and discs I'm trying with 13.  What is the problem?

    I installed PE13 and cannot burn blu-ray DVDs.  I was able to burn 3 blu-ray DVDs using PE12.  When I select DVD from the menu it recogniazes that it is not a stadard DVD as I get an 'incorrect media' error message.  It will burn standard DVDs of the same video using standard DVD mefia.
    What is going  on here?
    When I loaded PE 12 back on the computer I cannot load a file created with PE13.  Looks like a format change?  Can I convert file back to PE12?

    Juergen
    Terrible news. Sorry about that.
    The following is an excerpt from my Premiere Elements 13 blog post, the section on Publish+Share/Disc
    The ISO Image choice is only in Premiere Elements 13.
    DISC. Major Changes Include Burn to offering ISO Image for DVD, Blu-ray, and AVCHD plus 2 new 1080p @ 23.976 presets for Blu-ray.
    The major categories of Publish+Share/Disc/ are DVD, Blu-ray, and Blu-ray. DVD and AVCHD offer burn to disc, folder, and new ISO image. Blu-ray offers burn to disc and new ISO image.Like 12, the new version's DVD, Blu-ray, and AVCHD presets do not have an Advanced Button under which to customize the preset and do not have a "Share Work Area Bar Only" option for selective sharing of the Timeline content Sketch of DVD, Blu-ray, AVCHD includes
    DVD (new features)
    Burn to:
    Disc
    ISO Image (4.7 GB) NEW
    ISO Image (8.5 GB) NEW
    Folder (4.7 GB)
    Folder (8.5 GB)
    Presets
    NTSC_Dolby DVD
    NTSC_Widescreen_Dolby DVD
    PAL_Dolby DVD
    PAL_Widescreen_DVD
    As before in 12, frame rate is 29.97 interlaced frames per second NTSC and 25 interlaced frames per second PAL.
    AVCHD (no changes)
    Burn to:
    Disc
    Folder (4.7 GB)
    Folder (8.5 GB)
    Presets
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    Blu-ray (new features)
    Burn to:
    Disc
    ISO Image (25 GB) NEW
    ISO Image (50 GB) NEW
    Presets
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby NEW
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby NEW
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    Look to Burn To: in the Burn Dialog,  and scroll down there to the option that you want.
    Please let me know if this ISO Image choice is going to work for you. But I will keeping searching for the answer to these no media present situations.
    ATR

Maybe you are looking for

  • View Batch Number and Split Valuation

    Hello Friends, I  have materials in my plant with Split Valuation ,I am also maintaining the batch Managemnt for a material aginst each vlauation type in batches. My query was how to view the batch number & split valuation  simulatenously , of a mate

  • Can a RVL200 connect to BEEVPN with this config?

    Hi all, Hope someone can help me get clear on this. I'm in doubt whether I should buy a RVL200. I'm no expert in VPN or routers. I would like to know whether or not I can use a RVL200 to establish an Ipsec tunnel to BEEVPN-service (beevpn.com). They

  • Basic questions about NWDI structure

    Hello All, I have read some materials about the Java development process within SAP J2EE engine. Here I just want to confirm with you some knowledge points and ask some questions about the configuration of NWDI before proceeding Java development. 1.

  • Tcode: FAKP - Payment advice fast entry

    Hi Abapers, I have a requirement  to customise the standard tcode: FAKP. requirement includes: 1. I need to add 3 fields from table: AVIP to possible fields section of FAKP tcode. Fields to be added are: Payment ref. no(AVIP-KIDNO), Deduction Amount

  • Why does Indesign reset my print driver?

    When I go into the print dialog and click on "setup" to go to the Minolta Bizhub C450 print driver, I find that the items that I have changed (like collate, double sided, grayscale, the list goes on) have been changed back to the original setting aft