My hp mini 110-4100 F11 error!!

my hp mini 110-4100 F11 error!!

Hi zeroking, welcome to the HP Forums. Do you have more details to provide? Do you get that error on startup? Are you able to enter Windows? What operating system is installed?
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

Hp mini 110 boot disk error after installing new hard drive and system recovery

Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy...

Hp mini 110-1140 Fatal Error... System Halted. CNU94542R9 Need password to log on!

HP MINI FATAL ERROR SYSTEM HALTED .CNU94542R9 . Need password to log on!
Please Anybody SOLVE THAT PROBLEM. I HAV NOT OPEN MY PC SINCE one year, plz help me if you can?.
This question was solved.
View Solution.

Hi,
Good to hear it's Ok
You can remove the need for a power on password as follows - use the code from my previous post where necessary.
Shut down the notebook. Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu. Use the arrow keys to highlight the Security tab and hit enter. Use the arrow keys again to highlight power on password and hit enter. Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field. Press f10, select to save the new settings and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp mini 110-1046nr fatal error code bios password

cnu0065bvp
This question was solved.
View Solution.

Hi Don,
Try entering:      e9lofxx4w4       ( Note that in both cases, the 3rd character is a lower case L )
                                        or
                                e9lofxxrwr
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP MINI 110 FATAL ERROR SYSTEM HALTED . [edited] .!!!

HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED .
[edited Serial Number by Moderator]
plz ANYbody SOLVE THAT PROBLEM. I HAV NOT OPEN MY LAP SINCE 3 MONths..

Cowboys try. e9lo3qquu9 3rd letter lowercase L. 4th letter lowercase O. 6th and 7th letter lowercase Q. Use that code to go into the BIOS. Disable all passwords that are enabled. If asked for the CURRENT password use that code. If asked for NEW password just hit enter. If asked to VERIFY password just hit enter. Save and exit. REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

For run bluetooth in hp mini 110

i couldn't run bluetooth in my hp mini 110-4100 .how can i run though it is installed in my gadget.

Hello Homnath.
Are you getting an error when trying to use the device?
Has it ever worked properly?
What version of Windows are you using?
Try the steps outlined in this document and let me know if they help.
Have a lovely day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Error message during recovery reformatting hp mini 110-3030nr

ordered the recovery usb for my hp mini 110-3030nr trying to format but when its trys to write recovery files I get this error message. copy file fails From: D:\preload\base.wim To: C:\RM\Image\base.wim Please help
product number WQ809UA#ABA

Hello mtkrass.
Have you tried using a different USB port to perform the recovery? The error refers to it having issues reading files so that would be a possible solution. If you're still unable to get the notebook to read the files you need to contact HP Support again and let them know. There is a possibility the image is corrupted or damaged.
The number for HP Support is 1-800-474-6836 for US/Canadian customers. If you're in another part of the world you'll need to visit HP Support Worldwide to get your region's contact information.
Have a good day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HP MINI 110 FATAL ERROR SYSTEM HALTED

Hi, I have a HP MINI 110 and I forgot the password for bios.
After three unsuccessful attempts on the screen appears: FATAL ERROR SYSTEM HALTED CNU9459FB0
s/n(Personal information removed by Moderator) - p/n: VJ205EA#UUZ
Thank you
Text translated with google
This question was solved.
View Solution.

Hi,
Enter: e9lovqo8p1 ( 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp mini 110-1126NR error fatal

porfavor ayuda mi pc hp mini 110-1126NR no arranca me pide un passwerd no se q hacer m sale error fatal sistem halted

Hi,
Please try (all lower cases)
e9lo7vgb7v (3rd char is a lower case of L)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP mini 110. System halt error (Forgot Bios Password)

To whom it may concern,
I cannot log into my hp mini 110. it has a bios password set by the previous owner (I got it used) the system halt code is CNU9484CQX.
Thanks.
This question was solved.
View Solution.

Hi,
Please try again:
e9lovuve54 or e9lovuve5r (3rd char is lower case of L, the 4th char is lower case of leter O, not zero).
You must use EN-US keyboard.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Compaq Mini 110 won't start after cleaning Think Point virus

Hi
I'm helping my daughter with the following problem with her Compaq mini 110.
After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
Thanks,
Per
FACTS:
Computer model: Compaq Mini 110c-1100SO
OS is Windows XP as supplied with the computer and was never changed.
Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
RAM diagnostics in BIOS setup performed without error reports (1 GB)
Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
I have set the delay for the user to press F10 to 5 seconds.
The display/screen works properly during BIOS setup
Power adaptor connected, and charging LED lights constantly (as I expect it to do)
Power on LED lights constantly
Wireless network LED lights constantly
Caps lock LED flashes briefly at start up, then gets dark.
When booting stops, background light on display is on, no text or symbols are shown at this state.
BIOS password has never been activated
BIOS Administrator Password has never been activated
Internal Network Adapter Boot never enabled

Hi,
On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk. Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
http://www.techmixer.com/kaspersky-rescue-disk-load-kaspersky-antivirus-2009-using-dos/
Let me know how you get on.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Exactly what partitions is the BIOS checking for when starting a HP mini 110?

My niece has a HP mini 110 that failed one day. On doing a bios hard drive check it failed (7 on read). I though I'd have to get a new one so I ordered another. While waiting for this to arrive I got access to a SATA usb bridge and as the opperating system was beyond repair and the disk unreadable by the HP mini, I decided to try to repair the disk. So I reformatted the old drive using my desktop computer. Windows had no problems with the drive and it seemed to run fine.
I also had to order the recovery disks (windows 7 intro).
Anyway on trying to reinstall using the recovery disks via USB DVD drive. It kept coming back with error 17 - which I found to be a hard drive error. I also tried installing using a Windows XP installation disk and this was more self explanatory it said there was either NO hard drive installed - or 'it didn't match the hardware specs for the unit' (or words to that effect)
On getting the new hard drive - same problem. Even though both of these hard drives work as USB drives connected to my main desk. SO, my conclusion is that on boot up the BIOS inspects the hard drive, checks to see the configuration of the formatting. i.e. the size and partitions etc. and when these are not matching the BIOS idea of proper specs it rejects the hard drive and considers there is none installed. Or perhaps there needs to be some basic files on the hard drive. Whatever the case, the bios concludes there is no hard drive and will always return a 'fail' in the bios hard drive test.
Any ideas on this? I need to find out exactly what partitions are expected by the bios. Does anyone have these specs, or perhaps you have a HP mini and can examine your hard drive and tell me the partition amounts and sizes?
Unless I can get the bios to recognise the hard drive I can't see how I can reinstall the OS on to it. Any and all help much appreciated.
Thanks
When it comes to fixing computers the longest word in the English language is "JUST" . . . as in 'you just do that and it will work' :-)

beevo you have used your logic to come up with the answer but in this case you are just a little bit off. The hard drive error you see in the BIOS is a SMART error. This is read out by a chip inside the hard drive itself working in conjunction with the BIOS. The chip stores data and is constantly testing the drive and if the read time or seek time or such such parameter is out of whack it reports that to the BIOS and you get a SMART error. It is a pure hardware thing and has nothing to do with any partition scheme or anthing else to do with the actual contents of the drive. A blank hard drive (written with all 0s) will still throw off a SMART error if there is such an error. SMART errors vary in severity but my rule of thumb and the mainstream thinking on this is treat a SMART error like a diagnosis of an incurable cancer. The patient might live a while but his days are numbered. Back up, as stated above, and buy a new hard drive which you have apparently already done.
A drive with errors will sometimes format fine in Windows and work just fine as an external type drive with a usb connection but you would not want to use it for an operating system.
The fact that WIndows XP is not seeing the drive on installation is a Windows XP thing. Windows XP does not recognize SATA hard drives. You need to slipstream in a SATA driver while you run XP installation by either modifying the install CD or using a usb external floppy disk.
To be clear, have you tried the recovery disks with the new hard drive and you still get the error or you have only tried to install XP on the new drive? If you are getting the error 7 with the new drive, you may have bigger problems such as a bad storage controller on the motherboard. That kind of error can cause the BIOS to read out a SMART error, too. You might want to try a hard reset on the computer by removing battery and AC adapter, hold down the power button 30 seconds and then try to start it with the AC attached. You can also boot it with no hard drive in and try resetting the BIOS to default settings and try the hard drive again.
Also to be clear, is the error 7 actually showing up in the BIOS or is it showing up during installation from the recovery disks? Are the recovery disks Windows 7 or XP?

HP Mini 110-3131DX. Hard drive replacement; do I need a new one and where would I get it?

I dropped my HP Mini 110-3131DX directly on it's spine and ever since it only turns on to show the startup screen and these error messages:
HARD DISK ERROR
Please run the hard disk test in system diagnostics.
Hard Disk 1 (3F1)
F2 System Diagnostics
Then, it takes a LONGGGG time to even get me to the right screen to do the test ( I have to restart the computer to be able to renavigate to the screen) and it says Hard Disk test failed. What do I do now? Do I have to put in a new hard drive? Where do I buy my specific new hard drive? I really need some help.
This question was solved.
View Solution.

T4M wrote:
Yes your HDD has been damaged , so you will have to buy new one.
Do you know where I could buy one? I've looked online but I can't find one specifically for my model.

HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...

Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How do i restore windows on my HP MINI 110-11.

How do i restore windows on my HP MINI 110-11. I can access everything through the HP start up screen i.e. Internet. Please help?

Do you have Recovery Partition on your laptop? If yes then try Recovery Manager by pressing F11 when PC boots.

My hp mini 110-4100 F11 error!!

Similar Messages

Maybe you are looking for